All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andrew Jeffery <andrew@aj.id.au>
To: linux-mmc@vger.kernel.org
Cc: ulf.hansson@linaro.org, robh+dt@kernel.org, joel@jms.id.au,
	adrian.hunter@intel.com, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-aspeed@lists.ozlabs.org, ryan_chen@aspeedtech.com
Subject: [PATCH v7 4/6] mmc: sdhci-of-aspeed: Add KUnit tests for phase calculations
Date: Thu, 14 Jan 2021 13:44:31 +1030	[thread overview]
Message-ID: <20210114031433.2388532-5-andrew@aj.id.au> (raw)
In-Reply-To: <20210114031433.2388532-1-andrew@aj.id.au>

Converting degrees of phase to logic delays is irritating to test on
hardware, so lets exercise the function using KUnit.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
 drivers/mmc/host/Kconfig                | 14 ++++
 drivers/mmc/host/sdhci-of-aspeed-test.c | 98 +++++++++++++++++++++++++
 drivers/mmc/host/sdhci-of-aspeed.c      |  4 +
 3 files changed, 116 insertions(+)
 create mode 100644 drivers/mmc/host/sdhci-of-aspeed-test.c

diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 596f32637315..d6f00d1d6251 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -168,6 +168,20 @@ config MMC_SDHCI_OF_ASPEED
 
 	  If unsure, say N.
 
+config MMC_SDHCI_OF_ASPEED_TEST
+	bool "Tests for the ASPEED SDHCI driver"
+	depends on MMC_SDHCI_OF_ASPEED && KUNIT=y
+	help
+	  Enable KUnit tests for the ASPEED SDHCI driver. Select this
+	  option only if you will boot the kernel for the purpose of running
+	  unit tests (e.g. under UML or qemu).
+
+	  The KUnit tests generally exercise parts of the driver that do not
+	  directly touch the hardware, for example, the phase correction
+	  calculations.
+
+	  If unsure, say N.
+
 config MMC_SDHCI_OF_AT91
 	tristate "SDHCI OF support for the Atmel SDMMC controller"
 	depends on MMC_SDHCI_PLTFM
diff --git a/drivers/mmc/host/sdhci-of-aspeed-test.c b/drivers/mmc/host/sdhci-of-aspeed-test.c
new file mode 100644
index 000000000000..34070605b28b
--- /dev/null
+++ b/drivers/mmc/host/sdhci-of-aspeed-test.c
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* Copyright (C) 2020 IBM Corp. */
+
+#include <kunit/test.h>
+
+static void aspeed_sdhci_phase_ddr52(struct kunit *test)
+{
+	int rate = 52000000;
+
+	KUNIT_EXPECT_EQ(test, 0,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 0));
+	KUNIT_EXPECT_EQ(test, 0,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 1));
+	KUNIT_EXPECT_EQ(test, 1,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 2));
+	KUNIT_EXPECT_EQ(test, 1,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 3));
+	KUNIT_EXPECT_EQ(test, 2,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 4));
+	KUNIT_EXPECT_EQ(test, 3,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 5));
+	KUNIT_EXPECT_EQ(test, 14,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 23));
+	KUNIT_EXPECT_EQ(test, 15,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 24));
+	KUNIT_EXPECT_EQ(test, 15,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 25));
+
+	KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK | 0,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 180));
+	KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK | 0,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 181));
+	KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK | 1,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 182));
+	KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK | 1,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 183));
+	KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK | 2,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 184));
+	KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK | 3,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 185));
+	KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK | 14,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 203));
+	KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK | 15,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 204));
+	KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK | 15,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 205));
+}
+
+static void aspeed_sdhci_phase_hs200(struct kunit *test)
+{
+	int rate = 200000000;
+
+	KUNIT_EXPECT_EQ(test, 0,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 0));
+	KUNIT_EXPECT_EQ(test, 0,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 5));
+	KUNIT_EXPECT_EQ(test, 1,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 6));
+	KUNIT_EXPECT_EQ(test, 1,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 7));
+	KUNIT_EXPECT_EQ(test, 14,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 89));
+	KUNIT_EXPECT_EQ(test, 15,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 90));
+	KUNIT_EXPECT_EQ(test, 15,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 91));
+	KUNIT_EXPECT_EQ(test, 15,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 96));
+
+	KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 180));
+	KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 185));
+	KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK | 1,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 186));
+	KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK | 1,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 187));
+	KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK | 14,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 269));
+	KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK | 15,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 270));
+	KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK | 15,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 271));
+	KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK | 15,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 276));
+}
+
+static struct kunit_case aspeed_sdhci_test_cases[] = {
+	KUNIT_CASE(aspeed_sdhci_phase_ddr52),
+	KUNIT_CASE(aspeed_sdhci_phase_hs200),
+	{}
+};
+
+static struct kunit_suite aspeed_sdhci_test_suite = {
+	.name = "sdhci-of-aspeed",
+	.test_cases = aspeed_sdhci_test_cases,
+};
+kunit_test_suite(aspeed_sdhci_test_suite);
diff --git a/drivers/mmc/host/sdhci-of-aspeed.c b/drivers/mmc/host/sdhci-of-aspeed.c
index 4b30f6a1178e..3b0d381e1215 100644
--- a/drivers/mmc/host/sdhci-of-aspeed.c
+++ b/drivers/mmc/host/sdhci-of-aspeed.c
@@ -579,6 +579,10 @@ static void __exit aspeed_sdc_exit(void)
 }
 module_exit(aspeed_sdc_exit);
 
+#if defined(CONFIG_MMC_SDHCI_OF_ASPEED_TEST)
+#include "sdhci-of-aspeed-test.c"
+#endif
+
 MODULE_DESCRIPTION("Driver for the ASPEED SD/SDIO/SDHCI Controllers");
 MODULE_AUTHOR("Ryan Chen <ryan_chen@aspeedtech.com>");
 MODULE_AUTHOR("Andrew Jeffery <andrew@aj.id.au>");
-- 
2.27.0


WARNING: multiple messages have this Message-ID (diff)
From: Andrew Jeffery <andrew@aj.id.au>
To: linux-mmc@vger.kernel.org
Cc: devicetree@vger.kernel.org, ulf.hansson@linaro.org,
	ryan_chen@aspeedtech.com, linux-aspeed@lists.ozlabs.org,
	linux-kernel@vger.kernel.org, adrian.hunter@intel.com,
	robh+dt@kernel.org, joel@jms.id.au,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7 4/6] mmc: sdhci-of-aspeed: Add KUnit tests for phase calculations
Date: Thu, 14 Jan 2021 13:44:31 +1030	[thread overview]
Message-ID: <20210114031433.2388532-5-andrew@aj.id.au> (raw)
In-Reply-To: <20210114031433.2388532-1-andrew@aj.id.au>

Converting degrees of phase to logic delays is irritating to test on
hardware, so lets exercise the function using KUnit.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
 drivers/mmc/host/Kconfig                | 14 ++++
 drivers/mmc/host/sdhci-of-aspeed-test.c | 98 +++++++++++++++++++++++++
 drivers/mmc/host/sdhci-of-aspeed.c      |  4 +
 3 files changed, 116 insertions(+)
 create mode 100644 drivers/mmc/host/sdhci-of-aspeed-test.c

diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 596f32637315..d6f00d1d6251 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -168,6 +168,20 @@ config MMC_SDHCI_OF_ASPEED
 
 	  If unsure, say N.
 
+config MMC_SDHCI_OF_ASPEED_TEST
+	bool "Tests for the ASPEED SDHCI driver"
+	depends on MMC_SDHCI_OF_ASPEED && KUNIT=y
+	help
+	  Enable KUnit tests for the ASPEED SDHCI driver. Select this
+	  option only if you will boot the kernel for the purpose of running
+	  unit tests (e.g. under UML or qemu).
+
+	  The KUnit tests generally exercise parts of the driver that do not
+	  directly touch the hardware, for example, the phase correction
+	  calculations.
+
+	  If unsure, say N.
+
 config MMC_SDHCI_OF_AT91
 	tristate "SDHCI OF support for the Atmel SDMMC controller"
 	depends on MMC_SDHCI_PLTFM
diff --git a/drivers/mmc/host/sdhci-of-aspeed-test.c b/drivers/mmc/host/sdhci-of-aspeed-test.c
new file mode 100644
index 000000000000..34070605b28b
--- /dev/null
+++ b/drivers/mmc/host/sdhci-of-aspeed-test.c
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* Copyright (C) 2020 IBM Corp. */
+
+#include <kunit/test.h>
+
+static void aspeed_sdhci_phase_ddr52(struct kunit *test)
+{
+	int rate = 52000000;
+
+	KUNIT_EXPECT_EQ(test, 0,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 0));
+	KUNIT_EXPECT_EQ(test, 0,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 1));
+	KUNIT_EXPECT_EQ(test, 1,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 2));
+	KUNIT_EXPECT_EQ(test, 1,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 3));
+	KUNIT_EXPECT_EQ(test, 2,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 4));
+	KUNIT_EXPECT_EQ(test, 3,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 5));
+	KUNIT_EXPECT_EQ(test, 14,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 23));
+	KUNIT_EXPECT_EQ(test, 15,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 24));
+	KUNIT_EXPECT_EQ(test, 15,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 25));
+
+	KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK | 0,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 180));
+	KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK | 0,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 181));
+	KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK | 1,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 182));
+	KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK | 1,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 183));
+	KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK | 2,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 184));
+	KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK | 3,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 185));
+	KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK | 14,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 203));
+	KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK | 15,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 204));
+	KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK | 15,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 205));
+}
+
+static void aspeed_sdhci_phase_hs200(struct kunit *test)
+{
+	int rate = 200000000;
+
+	KUNIT_EXPECT_EQ(test, 0,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 0));
+	KUNIT_EXPECT_EQ(test, 0,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 5));
+	KUNIT_EXPECT_EQ(test, 1,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 6));
+	KUNIT_EXPECT_EQ(test, 1,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 7));
+	KUNIT_EXPECT_EQ(test, 14,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 89));
+	KUNIT_EXPECT_EQ(test, 15,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 90));
+	KUNIT_EXPECT_EQ(test, 15,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 91));
+	KUNIT_EXPECT_EQ(test, 15,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 96));
+
+	KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 180));
+	KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 185));
+	KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK | 1,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 186));
+	KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK | 1,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 187));
+	KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK | 14,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 269));
+	KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK | 15,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 270));
+	KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK | 15,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 271));
+	KUNIT_EXPECT_EQ(test, (int)ASPEED_SDHCI_TAP_PARAM_INVERT_CLK | 15,
+			aspeed_sdhci_phase_to_tap(NULL, rate, 276));
+}
+
+static struct kunit_case aspeed_sdhci_test_cases[] = {
+	KUNIT_CASE(aspeed_sdhci_phase_ddr52),
+	KUNIT_CASE(aspeed_sdhci_phase_hs200),
+	{}
+};
+
+static struct kunit_suite aspeed_sdhci_test_suite = {
+	.name = "sdhci-of-aspeed",
+	.test_cases = aspeed_sdhci_test_cases,
+};
+kunit_test_suite(aspeed_sdhci_test_suite);
diff --git a/drivers/mmc/host/sdhci-of-aspeed.c b/drivers/mmc/host/sdhci-of-aspeed.c
index 4b30f6a1178e..3b0d381e1215 100644
--- a/drivers/mmc/host/sdhci-of-aspeed.c
+++ b/drivers/mmc/host/sdhci-of-aspeed.c
@@ -579,6 +579,10 @@ static void __exit aspeed_sdc_exit(void)
 }
 module_exit(aspeed_sdc_exit);
 
+#if defined(CONFIG_MMC_SDHCI_OF_ASPEED_TEST)
+#include "sdhci-of-aspeed-test.c"
+#endif
+
 MODULE_DESCRIPTION("Driver for the ASPEED SD/SDIO/SDHCI Controllers");
 MODULE_AUTHOR("Ryan Chen <ryan_chen@aspeedtech.com>");
 MODULE_AUTHOR("Andrew Jeffery <andrew@aj.id.au>");
-- 
2.27.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2021-01-14  3:16 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-14  3:14 [PATCH v7 0/6] mmc: sdhci-of-aspeed: Expose phase delay tuning Andrew Jeffery
2021-01-14  3:14 ` Andrew Jeffery
2021-01-14  3:14 ` [PATCH v7 1/6] mmc: core: Add helper for parsing clock phase properties Andrew Jeffery
2021-01-14  3:14   ` Andrew Jeffery
2021-01-14  3:14 ` [PATCH v7 2/6] mmc: sdhci-of-aspeed: Expose clock phase controls Andrew Jeffery
2021-01-14  3:14   ` Andrew Jeffery
2021-01-14  3:14 ` [PATCH v7 3/6] mmc: sdhci-of-aspeed: Add AST2600 bus clock support Andrew Jeffery
2021-01-14  3:14   ` Andrew Jeffery
2021-01-14  3:14 ` Andrew Jeffery [this message]
2021-01-14  3:14   ` [PATCH v7 4/6] mmc: sdhci-of-aspeed: Add KUnit tests for phase calculations Andrew Jeffery
2021-01-14  3:14 ` [PATCH v7 5/6] MAINTAINERS: Add entry for the ASPEED SD/MMC driver Andrew Jeffery
2021-01-14  3:14   ` Andrew Jeffery
2021-01-14  3:14 ` [PATCH v7 6/6] ARM: dts: rainier: Add eMMC clock phase compensation Andrew Jeffery
2021-01-14  3:14   ` Andrew Jeffery
2021-01-20 13:56 ` [PATCH v7 0/6] mmc: sdhci-of-aspeed: Expose phase delay tuning Ulf Hansson
2021-01-20 13:56   ` Ulf Hansson
2021-01-20 23:46   ` Andrew Jeffery
2021-01-20 23:46     ` Andrew Jeffery

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210114031433.2388532-5-andrew@aj.id.au \
    --to=andrew@aj.id.au \
    --cc=adrian.hunter@intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=joel@jms.id.au \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-aspeed@lists.ozlabs.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=ryan_chen@aspeedtech.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.