From: Eric Auger <eric.auger@redhat.com> To: eric.auger.pro@gmail.com, eric.auger@redhat.com, linux-kernel@vger.kernel.org, kvm@vger.kernel.org, kvmarm@lists.cs.columbia.edu, maz@kernel.org, drjones@redhat.com Cc: alexandru.elisei@arm.com, james.morse@arm.com, julien.thierry.kdev@gmail.com, suzuki.poulose@arm.com, shuah@kernel.org, pbonzini@redhat.com Subject: [PATCH v2 1/9] KVM: arm64: vgic-v3: Fix some error codes when setting RDIST base Date: Thu, 14 Jan 2021 11:37:00 +0100 [thread overview] Message-ID: <20210114103708.26763-2-eric.auger@redhat.com> (raw) In-Reply-To: <20210114103708.26763-1-eric.auger@redhat.com> KVM_DEV_ARM_VGIC_GRP_ADDR group doc says we should return -EEXIST in case the base address of the redist is already set. We currently return -EINVAL. However we need to return -EINVAL in case a legacy REDIST address is attempted to be set while REDIST_REGIONS were set. This case is discriminated by looking at the count field. Signed-off-by: Eric Auger <eric.auger@redhat.com> --- v1 -> v2: - simplify the check sequence --- arch/arm64/kvm/vgic/vgic-mmio-v3.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/arch/arm64/kvm/vgic/vgic-mmio-v3.c b/arch/arm64/kvm/vgic/vgic-mmio-v3.c index 15a6c98ee92f..013b737b658f 100644 --- a/arch/arm64/kvm/vgic/vgic-mmio-v3.c +++ b/arch/arm64/kvm/vgic/vgic-mmio-v3.c @@ -791,10 +791,6 @@ static int vgic_v3_insert_redist_region(struct kvm *kvm, uint32_t index, size_t size = count * KVM_VGIC_V3_REDIST_SIZE; int ret; - /* single rdist region already set ?*/ - if (!count && !list_empty(rd_regions)) - return -EINVAL; - /* cross the end of memory ? */ if (base + size < base) return -EINVAL; @@ -805,11 +801,14 @@ static int vgic_v3_insert_redist_region(struct kvm *kvm, uint32_t index, } else { rdreg = list_last_entry(rd_regions, struct vgic_redist_region, list); - if (index != rdreg->index + 1) - return -EINVAL; - /* Cannot add an explicitly sized regions after legacy region */ - if (!rdreg->count) + if ((!count) != (!rdreg->count)) + return -EINVAL; /* Mix REDIST and REDIST_REGION */ + + if (!count) + return -EEXIST; + + if (index != rdreg->index + 1) return -EINVAL; } -- 2.21.3
WARNING: multiple messages have this Message-ID (diff)
From: Eric Auger <eric.auger@redhat.com> To: eric.auger.pro@gmail.com, eric.auger@redhat.com, linux-kernel@vger.kernel.org, kvm@vger.kernel.org, kvmarm@lists.cs.columbia.edu, maz@kernel.org, drjones@redhat.com Cc: pbonzini@redhat.com, shuah@kernel.org Subject: [PATCH v2 1/9] KVM: arm64: vgic-v3: Fix some error codes when setting RDIST base Date: Thu, 14 Jan 2021 11:37:00 +0100 [thread overview] Message-ID: <20210114103708.26763-2-eric.auger@redhat.com> (raw) In-Reply-To: <20210114103708.26763-1-eric.auger@redhat.com> KVM_DEV_ARM_VGIC_GRP_ADDR group doc says we should return -EEXIST in case the base address of the redist is already set. We currently return -EINVAL. However we need to return -EINVAL in case a legacy REDIST address is attempted to be set while REDIST_REGIONS were set. This case is discriminated by looking at the count field. Signed-off-by: Eric Auger <eric.auger@redhat.com> --- v1 -> v2: - simplify the check sequence --- arch/arm64/kvm/vgic/vgic-mmio-v3.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/arch/arm64/kvm/vgic/vgic-mmio-v3.c b/arch/arm64/kvm/vgic/vgic-mmio-v3.c index 15a6c98ee92f..013b737b658f 100644 --- a/arch/arm64/kvm/vgic/vgic-mmio-v3.c +++ b/arch/arm64/kvm/vgic/vgic-mmio-v3.c @@ -791,10 +791,6 @@ static int vgic_v3_insert_redist_region(struct kvm *kvm, uint32_t index, size_t size = count * KVM_VGIC_V3_REDIST_SIZE; int ret; - /* single rdist region already set ?*/ - if (!count && !list_empty(rd_regions)) - return -EINVAL; - /* cross the end of memory ? */ if (base + size < base) return -EINVAL; @@ -805,11 +801,14 @@ static int vgic_v3_insert_redist_region(struct kvm *kvm, uint32_t index, } else { rdreg = list_last_entry(rd_regions, struct vgic_redist_region, list); - if (index != rdreg->index + 1) - return -EINVAL; - /* Cannot add an explicitly sized regions after legacy region */ - if (!rdreg->count) + if ((!count) != (!rdreg->count)) + return -EINVAL; /* Mix REDIST and REDIST_REGION */ + + if (!count) + return -EEXIST; + + if (index != rdreg->index + 1) return -EINVAL; } -- 2.21.3 _______________________________________________ kvmarm mailing list kvmarm@lists.cs.columbia.edu https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
next prev parent reply other threads:[~2021-01-14 10:39 UTC|newest] Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-01-14 10:36 [PATCH v2 0/9] KVM/ARM: Some vgic fixes and init sequence KVM selftests Eric Auger 2021-01-14 10:36 ` Eric Auger 2021-01-14 10:37 ` Eric Auger [this message] 2021-01-14 10:37 ` [PATCH v2 1/9] KVM: arm64: vgic-v3: Fix some error codes when setting RDIST base Eric Auger 2021-01-14 10:37 ` [PATCH v2 2/9] KVM: arm64: Fix KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION read Eric Auger 2021-01-14 10:37 ` Eric Auger 2021-01-14 10:37 ` [PATCH v2 3/9] KVM: arm64: vgic-v3: Fix error handling in vgic_v3_set_redist_base() Eric Auger 2021-01-14 10:37 ` Eric Auger 2021-01-14 10:37 ` [PATCH v2 4/9] KVM: arm/arm64: vgic: Reset base address on kvm_vgic_dist_destroy() Eric Auger 2021-01-14 10:37 ` Eric Auger 2021-01-14 10:37 ` [PATCH v2 5/9] KVM: arm: move has_run_once after the map_resources Eric Auger 2021-01-14 10:37 ` Eric Auger 2021-01-14 10:37 ` [PATCH v2 6/9] docs: kvm: devices/arm-vgic-v3: enhance KVM_DEV_ARM_VGIC_CTRL_INIT doc Eric Auger 2021-01-14 10:37 ` Eric Auger 2021-01-14 10:37 ` [PATCH v2 7/9] KVM: arm64: Simplify argument passing to vgic_uaccess_[read|write] Eric Auger 2021-01-14 10:37 ` Eric Auger 2021-01-14 10:37 ` [PATCH v2 8/9] KVM: arm64: vgic-v3: Expose GICR_TYPER.Last for userspace Eric Auger 2021-01-14 10:37 ` Eric Auger 2021-01-14 10:37 ` [PATCH v2 9/9] KVM: selftests: aarch64/vgic-v3 init sequence tests Eric Auger 2021-01-14 10:37 ` Eric Auger
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210114103708.26763-2-eric.auger@redhat.com \ --to=eric.auger@redhat.com \ --cc=alexandru.elisei@arm.com \ --cc=drjones@redhat.com \ --cc=eric.auger.pro@gmail.com \ --cc=james.morse@arm.com \ --cc=julien.thierry.kdev@gmail.com \ --cc=kvm@vger.kernel.org \ --cc=kvmarm@lists.cs.columbia.edu \ --cc=linux-kernel@vger.kernel.org \ --cc=maz@kernel.org \ --cc=pbonzini@redhat.com \ --cc=shuah@kernel.org \ --cc=suzuki.poulose@arm.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.