From: Zhang Han <zhanghan64@huawei.com>
To: <kraxel@redhat.com>
Cc: hunongda@huawei.com, zhang.zhanghailiang@huawei.com,
qemu-trivial@nongnu.org, qemu-devel@nongnu.org,
alex.chen@huawei.com, zhanghan64@huawei.com
Subject: [PATCH v2 4/7] audio: Fix lines over 90 characters
Date: Fri, 15 Jan 2021 09:24:28 +0800 [thread overview]
Message-ID: <20210115012431.79533-5-zhanghan64@huawei.com> (raw)
In-Reply-To: <20210115012431.79533-1-zhanghan64@huawei.com>
Fix the line width of code.
Signed-off-by: Zhang Han <zhanghan64@huawei.com>
---
audio/dsoundaudio.c | 37 +++++++++++++++++++++++++++----------
1 file changed, 27 insertions(+), 10 deletions(-)
diff --git a/audio/dsoundaudio.c b/audio/dsoundaudio.c
index 38ae2471f6..1891a38bee 100644
--- a/audio/dsoundaudio.c
+++ b/audio/dsoundaudio.c
@@ -89,7 +89,9 @@ static void dsound_log_hresult (HRESULT hr)
#endif
#ifdef DSERR_ALLOCATED
case DSERR_ALLOCATED:
- str = "The request failed because resources, such as a priority level, were already in use by another caller";
+ str = "The request failed because resources, "
+ "such as a priority level, were already in use "
+ "by another caller";
break;
#endif
#ifdef DSERR_ALREADYINITIALIZED
@@ -104,7 +106,8 @@ static void dsound_log_hresult (HRESULT hr)
#endif
#ifdef DSERR_BADSENDBUFFERGUID
case DSERR_BADSENDBUFFERGUID:
- str = "The GUID specified in an audiopath file does not match a valid mix-in buffer";
+ str = "The GUID specified in an audiopath file "
+ "does not match a valid mix-in buffer";
break;
#endif
#ifdef DSERR_BUFFERLOST
@@ -114,22 +117,31 @@ static void dsound_log_hresult (HRESULT hr)
#endif
#ifdef DSERR_BUFFERTOOSMALL
case DSERR_BUFFERTOOSMALL:
- str = "The buffer size is not great enough to enable effects processing";
+ str = "The buffer size is not great enough to "
+ "enable effects processing";
break;
#endif
#ifdef DSERR_CONTROLUNAVAIL
case DSERR_CONTROLUNAVAIL:
- str = "The buffer control (volume, pan, and so on) requested by the caller is not available. Controls must be specified when the buffer is created, using the dwFlags member of DSBUFFERDESC";
+ str = "The buffer control (volume, pan, and so on) "
+ "requested by the caller is not available. "
+ "Controls must be specified when the buffer is created, "
+ "using the dwFlags member of DSBUFFERDESC";
break;
#endif
#ifdef DSERR_DS8_REQUIRED
case DSERR_DS8_REQUIRED:
- str = "A DirectSound object of class CLSID_DirectSound8 or later is required for the requested functionality. For more information, see IDirectSound8 Interface";
+ str = "A DirectSound object of class CLSID_DirectSound8 or later "
+ "is required for the requested functionality. "
+ "For more information, see IDirectSound8 Interface";
break;
#endif
#ifdef DSERR_FXUNAVAILABLE
case DSERR_FXUNAVAILABLE:
- str = "The effects requested could not be found on the system, or they are in the wrong order or in the wrong location; for example, an effect expected in hardware was found in software";
+ str = "The effects requested could not be found on the system, "
+ "or they are in the wrong order or in the wrong location; "
+ "for example, an effect expected in hardware "
+ "was found in software";
break;
#endif
#ifdef DSERR_GENERIC
@@ -154,7 +166,8 @@ static void dsound_log_hresult (HRESULT hr)
#endif
#ifdef DSERR_NODRIVER
case DSERR_NODRIVER:
- str = "No sound driver is available for use, or the given GUID is not a valid DirectSound device ID";
+ str = "No sound driver is available for use, "
+ "or the given GUID is not a valid DirectSound device ID";
break;
#endif
#ifdef DSERR_NOINTERFACE
@@ -169,12 +182,14 @@ static void dsound_log_hresult (HRESULT hr)
#endif
#ifdef DSERR_OTHERAPPHASPRIO
case DSERR_OTHERAPPHASPRIO:
- str = "Another application has a higher priority level, preventing this call from succeeding";
+ str = "Another application has a higher priority level, "
+ "preventing this call from succeeding";
break;
#endif
#ifdef DSERR_OUTOFMEMORY
case DSERR_OUTOFMEMORY:
- str = "The DirectSound subsystem could not allocate sufficient memory to complete the caller's request";
+ str = "The DirectSound subsystem could not allocate "
+ "sufficient memory to complete the caller's request";
break;
#endif
#ifdef DSERR_PRIOLEVELNEEDED
@@ -189,7 +204,9 @@ static void dsound_log_hresult (HRESULT hr)
#endif
#ifdef DSERR_UNINITIALIZED
case DSERR_UNINITIALIZED:
- str = "The Initialize method has not been called or has not been called successfully before other methods were called";
+ str = "The Initialize method has not been called "
+ "or has not been called successfully "
+ "before other methods were called";
break;
#endif
#ifdef DSERR_UNSUPPORTED
--
2.29.1.59.gf9b6481aed
next prev parent reply other threads:[~2021-01-15 1:42 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-15 1:24 [PATCH v2 0/7]Fix some style problems in audio Zhang Han
2021-01-15 1:24 ` [PATCH v2 1/7] audio: Add braces for statements/fix braces' position Zhang Han
2021-01-15 1:24 ` [PATCH v2 2/7] audio: Add spaces around operator/delete redundant spaces Zhang Han
2021-01-15 9:21 ` Philippe Mathieu-Daudé
2021-01-15 1:24 ` [PATCH v2 3/7] audio: foo* bar" should be "foo *bar" Zhang Han
2021-01-15 1:24 ` Zhang Han [this message]
2021-01-15 1:24 ` [PATCH v2 5/7] audio: Don't use '%#' in format strings Zhang Han
2021-01-15 9:20 ` Philippe Mathieu-Daudé
2021-01-15 1:24 ` [PATCH v2 6/7] audio: Suspect code indent for conditional statements Zhang Han
2021-01-15 1:24 ` [PATCH v2 7/7] audio: space prohibited between function name and parenthesis'(' Zhang Han
2021-01-15 1:54 ` [PATCH v2 0/7]Fix some style problems in audio no-reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210115012431.79533-5-zhanghan64@huawei.com \
--to=zhanghan64@huawei.com \
--cc=alex.chen@huawei.com \
--cc=hunongda@huawei.com \
--cc=kraxel@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-trivial@nongnu.org \
--cc=zhang.zhanghailiang@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.