[PATCH 8/9] userfaultfd: update documentation to describe minor fault handling

[Axel Rasmussen <axelrasmussen@google.com>]

Reword / reorganize things a little bit into "lists", so new features /
modes / ioctls can sort of just be appended.

Describe how UFFDIO_REGISTER_MODE_MINOR and UFFDIO_CONTINUE can be used
to intercept and resolve minor faults. Make it clear that COPY and
ZEROPAGE are used for MISSING faults, whereas CONTINUE is used for MINOR
faults.

Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
---
 Documentation/admin-guide/mm/userfaultfd.rst | 105 +++++++++++--------
 1 file changed, 64 insertions(+), 41 deletions(-)

diff --git a/Documentation/admin-guide/mm/userfaultfd.rst b/Documentation/admin-guide/mm/userfaultfd.rst
index 65eefa66c0ba..67f2c68e65a2 100644
--- a/Documentation/admin-guide/mm/userfaultfd.rst
+++ b/Documentation/admin-guide/mm/userfaultfd.rst
@@ -63,36 +63,36 @@ the generic ioctl available.
 
 The ``uffdio_api.features`` bitmask returned by the ``UFFDIO_API`` ioctl
 defines what memory types are supported by the ``userfaultfd`` and what
-events, except page fault notifications, may be generated.
-
-If the kernel supports registering ``userfaultfd`` ranges on hugetlbfs
-virtual memory areas, ``UFFD_FEATURE_MISSING_HUGETLBFS`` will be set in
-``uffdio_api.features``. Similarly, ``UFFD_FEATURE_MISSING_SHMEM`` will be
-set if the kernel supports registering ``userfaultfd`` ranges on shared
-memory (covering all shmem APIs, i.e. tmpfs, ``IPCSHM``, ``/dev/zero``,
-``MAP_SHARED``, ``memfd_create``, etc).
-
-The userland application that wants to use ``userfaultfd`` with hugetlbfs
-or shared memory need to set the corresponding flag in
-``uffdio_api.features`` to enable those features.
-
-If the userland desires to receive notifications for events other than
-page faults, it has to verify that ``uffdio_api.features`` has appropriate
-``UFFD_FEATURE_EVENT_*`` bits set. These events are described in more
-detail below in `Non-cooperative userfaultfd`_ section.
-
-Once the ``userfaultfd`` has been enabled the ``UFFDIO_REGISTER`` ioctl should
-be invoked (if present in the returned ``uffdio_api.ioctls`` bitmask) to
-register a memory range in the ``userfaultfd`` by setting the
+events, except page fault notifications, may be generated:
+
+- The ``UFFD_FEATURE_EVENT_*`` flags indicate that various other events
+  other than page faults are supported. These events are described in more
+  detail below in the `Non-cooperative userfaultfd`_ section.
+
+- ``UFFD_FEATURE_MISSING_HUGETLBFS`` and ``UFFD_FEATURE_MISSING_SHMEM``
+  indicate that the kernel supports ``UFFDIO_REGISTER_MODE_MISSING``
+  registrations for hugetlbfs and shared memory (covering all shmem APIs,
+  i.e. tmpfs, ``IPCSHM``, ``/dev/zero``, ``MAP_SHARED``, ``memfd_create``,
+  etc) virtual memory areas, respectively.
+
+- ``UFFD_FEATURE_MINOR_FAULT_HUGETLBFS`` indicates that the kernel
+  supports ``UFFDIO_REGISTER_MODE_MINOR`` registration for hugetlbfs
+  virtual memory areas.
+
+The userland application should set the feature flags it intends to use
+when envoking the ``UFFDIO_API`` ioctl, to request that those features be
+enabled if supported.
+
+Once the ``userfaultfd`` API has been enabled the ``UFFDIO_REGISTER``
+ioctl should be invoked (if present in the returned ``uffdio_api.ioctls``
+bitmask) to register a memory range in the ``userfaultfd`` by setting the
 uffdio_register structure accordingly. The ``uffdio_register.mode``
 bitmask will specify to the kernel which kind of faults to track for
-the range (``UFFDIO_REGISTER_MODE_MISSING`` would track missing
-pages). The ``UFFDIO_REGISTER`` ioctl will return the
+the range. The ``UFFDIO_REGISTER`` ioctl will return the
 ``uffdio_register.ioctls`` bitmask of ioctls that are suitable to resolve
 userfaults on the range registered. Not all ioctls will necessarily be
-supported for all memory types depending on the underlying virtual
-memory backend (anonymous memory vs tmpfs vs real filebacked
-mappings).
+supported for all memory types (e.g. anonymous memory vs. shmem vs.
+hugetlbfs), or all types of intercepted faults.
 
 Userland can use the ``uffdio_register.ioctls`` to manage the virtual
 address space in the background (to add or potentially also remove
@@ -100,21 +100,44 @@ memory from the ``userfaultfd`` registered range). This means a userfault
 could be triggering just before userland maps in the background the
 user-faulted page.
 
-The primary ioctl to resolve userfaults is ``UFFDIO_COPY``. That
-atomically copies a page into the userfault registered range and wakes
-up the blocked userfaults
-(unless ``uffdio_copy.mode & UFFDIO_COPY_MODE_DONTWAKE`` is set).
-Other ioctl works similarly to ``UFFDIO_COPY``. They're atomic as in
-guaranteeing that nothing can see an half copied page since it'll
-keep userfaulting until the copy has finished.
+Resolving Userfaults
+--------------------
+
+There are three basic ways to resolve userfaults:
+
+- ``UFFDIO_COPY`` atomically copies some existing page contents from
+  userspace.
+
+- ``UFFDIO_ZEROPAGE`` atomically zeros the new page.
+
+- ``UFFDIO_CONTINUE`` maps an existing, previously-populated page.
+
+These operations are atomic in the sense that they guarantee nothing can
+see a half-populated page, since readers will keep userfaulting until the
+operation has finished.
+
+By default, these wake up userfaults blocked on the range in question.
+They support a ``UFFDIO_*_MODE_DONTWAKE`` ``mode`` flag, which indicates
+that waking will be done separately at some later time.
+
+Which of these are used depends on the kind of fault:
+
+- For ``UFFDIO_REGISTER_MODE_MISSING`` faults, a new page has to be
+  provided. This can be done with either ``UFFDIO_COPY`` or
+  ``UFFDIO_ZEROPAGE``. The default (non-userfaultfd) behavior would be to
+  provide a zero page, but in userfaultfd this is left up to userspace.
+
+- For ``UFFDIO_REGISTER_MODE_MINOR`` faults, an existing page already
+  exists. Userspace needs to ensure its contents are correct (if it needs
+  to be modified, by writing directly to the non-userfaultfd-registered
+  side of shared memory), and then issue ``UFFDIO_CONTINUE`` to resolve
+  the fault.
 
 Notes:
 
-- If you requested ``UFFDIO_REGISTER_MODE_MISSING`` when registering then
-  you must provide some kind of page in your thread after reading from
-  the uffd.  You must provide either ``UFFDIO_COPY`` or ``UFFDIO_ZEROPAGE``.
-  The normal behavior of the OS automatically providing a zero page on
-  an anonymous mmaping is not in place.
+- You can tell which kind of fault occurred by examining
+  ``pagefault.flags`` within the ``uffd_msg``, checking for the
+  ``UFFD_PAGEFAULT_FLAG_*`` flags.
 
 - None of the page-delivering ioctls default to the range that you
   registered with.  You must fill in all fields for the appropriate
@@ -122,9 +145,9 @@ Notes:
 
 - You get the address of the access that triggered the missing page
   event out of a struct uffd_msg that you read in the thread from the
-  uffd.  You can supply as many pages as you want with ``UFFDIO_COPY`` or
-  ``UFFDIO_ZEROPAGE``.  Keep in mind that unless you used DONTWAKE then
-  the first of any of those IOCTLs wakes up the faulting thread.
+  uffd.  You can supply as many pages as you want with these IOCTLs.
+  Keep in mind that unless you used DONTWAKE then the first of any of
+  those IOCTLs wakes up the faulting thread.
 
 - Be sure to test for all errors including
   (``pollfd[0].revents & POLLERR``).  This can happen, e.g. when ranges
-- 
2.30.0.284.gd98b1dd5eaa7-goog