All of lore.kernel.org
 help / color / mirror / Atom feed
From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, qemu-arm@nongnu.org
Subject: [PATCH v3 01/21] tcg: Introduce target-specific page data for user-only
Date: Fri, 15 Jan 2021 12:46:25 -1000	[thread overview]
Message-ID: <20210115224645.1196742-2-richard.henderson@linaro.org> (raw)
In-Reply-To: <20210115224645.1196742-1-richard.henderson@linaro.org>

This data can be allocated by page_alloc_target_data() and
released by page_set_flags(start, end, prot | PAGE_RESET).

This data will be used to hold tag memory for AArch64 MTE.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v3: Add doc comments; tweak alloc so that the !PAGE_VALID case is clear.
---
 include/exec/cpu-all.h    | 42 +++++++++++++++++++++++++++++++++------
 accel/tcg/translate-all.c | 28 ++++++++++++++++++++++++++
 linux-user/mmap.c         |  4 +++-
 linux-user/syscall.c      |  4 ++--
 4 files changed, 69 insertions(+), 9 deletions(-)

diff --git a/include/exec/cpu-all.h b/include/exec/cpu-all.h
index 4b5408c341..99a09ee137 100644
--- a/include/exec/cpu-all.h
+++ b/include/exec/cpu-all.h
@@ -264,15 +264,21 @@ extern intptr_t qemu_host_page_mask;
 #define PAGE_EXEC      0x0004
 #define PAGE_BITS      (PAGE_READ | PAGE_WRITE | PAGE_EXEC)
 #define PAGE_VALID     0x0008
-/* original state of the write flag (used when tracking self-modifying
-   code */
+/*
+ * Original state of the write flag (used when tracking self-modifying code)
+ */
 #define PAGE_WRITE_ORG 0x0010
-/* Invalidate the TLB entry immediately, helpful for s390x
- * Low-Address-Protection. Used with PAGE_WRITE in tlb_set_page_with_attrs() */
-#define PAGE_WRITE_INV 0x0040
+/*
+ * Invalidate the TLB entry immediately, helpful for s390x
+ * Low-Address-Protection. Used with PAGE_WRITE in tlb_set_page_with_attrs()
+ */
+#define PAGE_WRITE_INV 0x0020
+/* For use with page_set_flags: page is being replaced; target_data cleared. */
+#define PAGE_RESET     0x0040
+
 #if defined(CONFIG_BSD) && defined(CONFIG_USER_ONLY)
 /* FIXME: Code that sets/uses this is broken and needs to go away.  */
-#define PAGE_RESERVED  0x0020
+#define PAGE_RESERVED  0x0100
 #endif
 /* Target-specific bits that will be used via page_get_flags().  */
 #define PAGE_TARGET_1  0x0080
@@ -287,6 +293,30 @@ int walk_memory_regions(void *, walk_memory_regions_fn);
 int page_get_flags(target_ulong address);
 void page_set_flags(target_ulong start, target_ulong end, int flags);
 int page_check_range(target_ulong start, target_ulong len, int flags);
+
+/**
+ * page_alloc_target_data(address, size)
+ * @address: guest virtual address
+ * @size: size of data to allocate
+ *
+ * Allocate @size bytes of out-of-band data to associate with the
+ * guest page at @address.  If the page is not mapped, NULL will
+ * be returned.  If there is existing data associated with @address,
+ * no new memory will be allocated.
+ *
+ * The memory will be freed when the guest page is deallocated,
+ * e.g. with the munmap system call.
+ */
+void *page_alloc_target_data(target_ulong address, size_t size);
+
+/**
+ * page_get_target_data(address)
+ * @address: guest virtual address
+ *
+ * Return any out-of-bound memory assocated with the guest page
+ * at @address, as per page_alloc_target_data.
+ */
+void *page_get_target_data(target_ulong address);
 #endif
 
 CPUArchState *cpu_copy(CPUArchState *env);
diff --git a/accel/tcg/translate-all.c b/accel/tcg/translate-all.c
index e9de6ff9dd..7bcb6663f1 100644
--- a/accel/tcg/translate-all.c
+++ b/accel/tcg/translate-all.c
@@ -113,6 +113,7 @@ typedef struct PageDesc {
     unsigned int code_write_count;
 #else
     unsigned long flags;
+    void *target_data;
 #endif
 #ifndef CONFIG_USER_ONLY
     QemuSpin lock;
@@ -2740,6 +2741,7 @@ int page_get_flags(target_ulong address)
 void page_set_flags(target_ulong start, target_ulong end, int flags)
 {
     target_ulong addr, len;
+    bool reset_target_data;
 
     /* This function should never be called with addresses outside the
        guest address space.  If this assert fires, it probably indicates
@@ -2754,6 +2756,8 @@ void page_set_flags(target_ulong start, target_ulong end, int flags)
     if (flags & PAGE_WRITE) {
         flags |= PAGE_WRITE_ORG;
     }
+    reset_target_data = !(flags & PAGE_VALID) || (flags & PAGE_RESET);
+    flags &= ~PAGE_RESET;
 
     for (addr = start, len = end - start;
          len != 0;
@@ -2767,10 +2771,34 @@ void page_set_flags(target_ulong start, target_ulong end, int flags)
             p->first_tb) {
             tb_invalidate_phys_page(addr, 0);
         }
+        if (reset_target_data && p->target_data) {
+            g_free(p->target_data);
+            p->target_data = NULL;
+        }
         p->flags = flags;
     }
 }
 
+void *page_get_target_data(target_ulong address)
+{
+    PageDesc *p = page_find(address >> TARGET_PAGE_BITS);
+    return p ? p->target_data : NULL;
+}
+
+void *page_alloc_target_data(target_ulong address, size_t size)
+{
+    PageDesc *p = page_find(address >> TARGET_PAGE_BITS);
+    void *ret = NULL;
+
+    if (p->flags & PAGE_VALID) {
+        ret = p->target_data;
+        if (!ret) {
+            p->target_data = ret = g_malloc0(size);
+        }
+    }
+    return ret;
+}
+
 int page_check_range(target_ulong start, target_ulong len, int flags)
 {
     PageDesc *p;
diff --git a/linux-user/mmap.c b/linux-user/mmap.c
index 810653c503..c693505b60 100644
--- a/linux-user/mmap.c
+++ b/linux-user/mmap.c
@@ -599,6 +599,7 @@ abi_long target_mmap(abi_ulong start, abi_ulong len, int target_prot,
         }
     }
  the_end1:
+    page_flags |= PAGE_RESET;
     page_set_flags(start, start + len, page_flags);
  the_end:
     trace_target_mmap_complete(start);
@@ -792,7 +793,8 @@ abi_long target_mremap(abi_ulong old_addr, abi_ulong old_size,
         new_addr = h2g(host_addr);
         prot = page_get_flags(old_addr);
         page_set_flags(old_addr, old_addr + old_size, 0);
-        page_set_flags(new_addr, new_addr + new_size, prot | PAGE_VALID);
+        page_set_flags(new_addr, new_addr + new_size,
+                       prot | PAGE_VALID | PAGE_RESET);
     }
     tb_invalidate_phys_range(new_addr, new_addr + new_size);
     mmap_unlock();
diff --git a/linux-user/syscall.c b/linux-user/syscall.c
index d182890ff0..bec2ab7769 100644
--- a/linux-user/syscall.c
+++ b/linux-user/syscall.c
@@ -4625,8 +4625,8 @@ static inline abi_ulong do_shmat(CPUArchState *cpu_env,
     raddr=h2g((unsigned long)host_raddr);
 
     page_set_flags(raddr, raddr + shm_info.shm_segsz,
-                   PAGE_VALID | PAGE_READ |
-                   ((shmflg & SHM_RDONLY)? 0 : PAGE_WRITE));
+                   PAGE_VALID | PAGE_RESET | PAGE_READ |
+                   (shmflg & SHM_RDONLY ? 0 : PAGE_WRITE));
 
     for (i = 0; i < N_SHM_REGIONS; i++) {
         if (!shm_regions[i].in_use) {
-- 
2.25.1



  reply	other threads:[~2021-01-15 22:49 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-15 22:46 [PATCH v3 00/21] target-arm: Implement ARMv8.5-MemTag, user mode Richard Henderson
2021-01-15 22:46 ` Richard Henderson [this message]
2021-01-19 16:53   ` [PATCH v3 01/21] tcg: Introduce target-specific page data for user-only Peter Maydell
2021-01-15 22:46 ` [PATCH v3 02/21] linux-user: Introduce PAGE_ANON Richard Henderson
2021-01-15 22:46 ` [PATCH v3 03/21] exec: Use uintptr_t for guest_base Richard Henderson
2021-01-19 16:56   ` Peter Maydell
2021-01-15 22:46 ` [PATCH v3 04/21] exec: Use uintptr_t in cpu_ldst.h Richard Henderson
2021-01-19 16:56   ` Peter Maydell
2021-01-15 22:46 ` [PATCH v3 05/21] exec: Improve types for guest_addr_valid Richard Henderson
2021-01-19 16:57   ` Peter Maydell
2021-01-15 22:46 ` [PATCH v3 06/21] linux-user: Check for overflow in access_ok Richard Henderson
2021-01-15 22:46 ` [PATCH v3 07/21] linux-user: Tidy VERIFY_READ/VERIFY_WRITE Richard Henderson
2021-01-15 22:46 ` [PATCH v3 08/21] bsd-user: " Richard Henderson
2021-01-16 16:28   ` Warner Losh
2021-01-15 22:46 ` [PATCH v3 09/21] linux-user: Do not use guest_addr_valid for h2g_valid Richard Henderson
2021-01-19 16:59   ` Peter Maydell
2021-01-15 22:46 ` [PATCH v3 10/21] linux-user: Fix guest_addr_valid vs reserved_va Richard Henderson
2021-01-19 17:03   ` Peter Maydell
2021-01-19 17:41     ` Richard Henderson
2021-01-15 22:46 ` [PATCH v3 11/21] exec: Add support for TARGET_TAGGED_ADDRESSES Richard Henderson
2021-01-22 14:13   ` Peter Maydell
2021-01-26 17:10     ` Richard Henderson
2021-01-15 22:46 ` [PATCH v3 12/21] linux-user/aarch64: Implement PR_TAGGED_ADDR_ENABLE Richard Henderson
2021-01-22 11:36   ` Peter Maydell
2021-01-22 11:53   ` Peter Maydell
2021-01-22 12:02     ` Peter Maydell
2021-01-15 22:46 ` [PATCH v3 13/21] linux-user/aarch64: Implement PR_MTE_TCF and PR_MTE_TAG Richard Henderson
2021-01-22 11:48   ` Peter Maydell
2021-01-15 22:46 ` [PATCH v3 14/21] linux-user/aarch64: Implement PROT_MTE Richard Henderson
2021-01-15 22:46 ` [PATCH v3 15/21] target/arm: Split out syndrome.h from internals.h Richard Henderson
2021-01-19 17:07   ` Peter Maydell
2021-01-15 22:46 ` [PATCH v3 16/21] linux-user/aarch64: Pass syndrome to EXC_*_ABORT Richard Henderson
2021-01-19 17:12   ` Peter Maydell
2021-01-15 22:46 ` [PATCH v3 17/21] linux-user/aarch64: Signal SEGV_MTESERR for sync tag check fault Richard Henderson
2021-01-22 12:03   ` Peter Maydell
2021-01-15 22:46 ` [PATCH v3 18/21] linux-user/aarch64: Signal SEGV_MTEAERR for async tag check error Richard Henderson
2021-01-22 13:59   ` Peter Maydell
2021-01-28  8:49     ` Richard Henderson
2021-01-28 10:44       ` Peter Maydell
2021-01-15 22:46 ` [PATCH v3 19/21] target/arm: Add allocation tag storage for user mode Richard Henderson
2021-01-22 14:05   ` Peter Maydell
2021-01-15 22:46 ` [PATCH v3 20/21] target/arm: Enable MTE for user-only Richard Henderson
2021-01-22 14:02   ` Peter Maydell
2021-01-15 22:46 ` [PATCH v3 21/21] tests/tcg/aarch64: Add mte smoke tests Richard Henderson
2021-01-22 14:04   ` Peter Maydell
2021-01-15 23:15 ` [PATCH v3 00/21] target-arm: Implement ARMv8.5-MemTag, user mode no-reply

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210115224645.1196742-2-richard.henderson@linaro.org \
    --to=richard.henderson@linaro.org \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.