All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andre Przywara <andre.przywara@arm.com>
To: Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
	Jernej Skrabec <jernej.skrabec@siol.net>
Cc: Icenowy Zheng <icenowy@aosc.io>,
	Samuel Holland <samuel@sholland.org>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com
Subject: [PATCH v3] clk: sunxi-ng: h6: Fix clock divider range on some clocks
Date: Mon, 18 Jan 2021 00:09:12 +0000	[thread overview]
Message-ID: <20210118000912.28116-1-andre.przywara@arm.com> (raw)

While comparing clocks between the H6 and H616, some of the M factor
ranges were found to be wrong: the manual says they are only covering
two bits [1:0], but our code had "5" in the number-of-bits field.

By writing 0xff into that register in U-Boot and via FEL, it could be
confirmed that bits [4:2] are indeed masked off, so the manual is right.

Change to number of bits in the affected clock's description.

Fixes: 524353ea480b ("clk: sunxi-ng: add support for the Allwinner H6 CCU")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
---

Splitting this off from the H616 series, since there is no dependency
to it.

 drivers/clk/sunxi-ng/ccu-sun50i-h6.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h6.c b/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
index a26dbbdff80d..bff446b78290 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
@@ -237,7 +237,7 @@ static const char * const psi_ahb1_ahb2_parents[] = { "osc24M", "osc32k",
 static SUNXI_CCU_MP_WITH_MUX(psi_ahb1_ahb2_clk, "psi-ahb1-ahb2",
 			     psi_ahb1_ahb2_parents,
 			     0x510,
-			     0, 5,	/* M */
+			     0, 2,	/* M */
 			     8, 2,	/* P */
 			     24, 2,	/* mux */
 			     0);
@@ -246,19 +246,19 @@ static const char * const ahb3_apb1_apb2_parents[] = { "osc24M", "osc32k",
 						       "psi-ahb1-ahb2",
 						       "pll-periph0" };
 static SUNXI_CCU_MP_WITH_MUX(ahb3_clk, "ahb3", ahb3_apb1_apb2_parents, 0x51c,
-			     0, 5,	/* M */
+			     0, 2,	/* M */
 			     8, 2,	/* P */
 			     24, 2,	/* mux */
 			     0);
 
 static SUNXI_CCU_MP_WITH_MUX(apb1_clk, "apb1", ahb3_apb1_apb2_parents, 0x520,
-			     0, 5,	/* M */
+			     0, 2,	/* M */
 			     8, 2,	/* P */
 			     24, 2,	/* mux */
 			     0);
 
 static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", ahb3_apb1_apb2_parents, 0x524,
-			     0, 5,	/* M */
+			     0, 2,	/* M */
 			     8, 2,	/* P */
 			     24, 2,	/* mux */
 			     0);
-- 
2.17.5


WARNING: multiple messages have this Message-ID (diff)
From: Andre Przywara <andre.przywara@arm.com>
To: Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
	Jernej Skrabec <jernej.skrabec@siol.net>
Cc: Samuel Holland <samuel@sholland.org>,
	Stephen Boyd <sboyd@kernel.org>,
	Michael Turquette <mturquette@baylibre.com>,
	linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com,
	linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	Icenowy Zheng <icenowy@aosc.io>
Subject: [PATCH v3] clk: sunxi-ng: h6: Fix clock divider range on some clocks
Date: Mon, 18 Jan 2021 00:09:12 +0000	[thread overview]
Message-ID: <20210118000912.28116-1-andre.przywara@arm.com> (raw)

While comparing clocks between the H6 and H616, some of the M factor
ranges were found to be wrong: the manual says they are only covering
two bits [1:0], but our code had "5" in the number-of-bits field.

By writing 0xff into that register in U-Boot and via FEL, it could be
confirmed that bits [4:2] are indeed masked off, so the manual is right.

Change to number of bits in the affected clock's description.

Fixes: 524353ea480b ("clk: sunxi-ng: add support for the Allwinner H6 CCU")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
---

Splitting this off from the H616 series, since there is no dependency
to it.

 drivers/clk/sunxi-ng/ccu-sun50i-h6.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h6.c b/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
index a26dbbdff80d..bff446b78290 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
@@ -237,7 +237,7 @@ static const char * const psi_ahb1_ahb2_parents[] = { "osc24M", "osc32k",
 static SUNXI_CCU_MP_WITH_MUX(psi_ahb1_ahb2_clk, "psi-ahb1-ahb2",
 			     psi_ahb1_ahb2_parents,
 			     0x510,
-			     0, 5,	/* M */
+			     0, 2,	/* M */
 			     8, 2,	/* P */
 			     24, 2,	/* mux */
 			     0);
@@ -246,19 +246,19 @@ static const char * const ahb3_apb1_apb2_parents[] = { "osc24M", "osc32k",
 						       "psi-ahb1-ahb2",
 						       "pll-periph0" };
 static SUNXI_CCU_MP_WITH_MUX(ahb3_clk, "ahb3", ahb3_apb1_apb2_parents, 0x51c,
-			     0, 5,	/* M */
+			     0, 2,	/* M */
 			     8, 2,	/* P */
 			     24, 2,	/* mux */
 			     0);
 
 static SUNXI_CCU_MP_WITH_MUX(apb1_clk, "apb1", ahb3_apb1_apb2_parents, 0x520,
-			     0, 5,	/* M */
+			     0, 2,	/* M */
 			     8, 2,	/* P */
 			     24, 2,	/* mux */
 			     0);
 
 static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", ahb3_apb1_apb2_parents, 0x524,
-			     0, 5,	/* M */
+			     0, 2,	/* M */
 			     8, 2,	/* P */
 			     24, 2,	/* mux */
 			     0);
-- 
2.17.5


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2021-01-18  0:11 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-18  0:09 Andre Przywara [this message]
2021-01-18  0:09 ` [PATCH v3] clk: sunxi-ng: h6: Fix clock divider range on some clocks Andre Przywara
2021-01-20  9:59 ` Maxime Ripard
2021-01-20  9:59   ` Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210118000912.28116-1-andre.przywara@arm.com \
    --to=andre.przywara@arm.com \
    --cc=icenowy@aosc.io \
    --cc=jernej.skrabec@siol.net \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=mripard@kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=samuel@sholland.org \
    --cc=sboyd@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.