All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vinod Koul <vkoul@kernel.org>
To: Stephen Boyd <sboyd@kernel.org>
Cc: linux-arm-msm@vger.kernel.org,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Vivek Aknurwar <viveka@codeaurora.org>,
	Andy Gross <agross@kernel.org>,
	Michael Turquette <mturquette@baylibre.com>,
	Rob Herring <robh+dt@kernel.org>,
	Taniya Das <tdas@codeaurora.org>,
	AngeloGioacchino Del Regno 
	<angelogioacchino.delregno@somainline.org>,
	linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Jeevan Shriram <jshriram@codeaurora.org>,
	Vinod Koul <vkoul@kernel.org>
Subject: [PATCH v4 3/5] clk: qcom: clk-alpha-pll: Add support for Lucid 5LPE PLL
Date: Mon, 18 Jan 2021 10:13:19 +0530	[thread overview]
Message-ID: <20210118044321.2571775-4-vkoul@kernel.org> (raw)
In-Reply-To: <20210118044321.2571775-1-vkoul@kernel.org>

From: Vivek Aknurwar <viveka@codeaurora.org>

Lucid 5LPE is a slightly different Lucid PLL with different offsets and
porgramming sequence so add support for these

Signed-off-by: Vivek Aknurwar <viveka@codeaurora.org>
Signed-off-by: Jeevan Shriram <jshriram@codeaurora.org>
[vkoul: rebase and tidy up for upstream]
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/clk/qcom/clk-alpha-pll.c | 173 +++++++++++++++++++++++++++++++
 drivers/clk/qcom/clk-alpha-pll.h |   4 +
 2 files changed, 177 insertions(+)

diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index a30ea7b09224..f9c48da21bd1 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -156,6 +156,12 @@ EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
 /* LUCID PLL specific settings and offsets */
 #define LUCID_PCAL_DONE		BIT(27)
 
+/* LUCID 5LPE PLL specific settings and offsets */
+#define LUCID_5LPE_PCAL_DONE		BIT(11)
+#define LUCID_5LPE_ALPHA_PLL_ACK_LATCH	BIT(13)
+#define LUCID_5LPE_PLL_LATCH_INPUT	BIT(14)
+#define LUCID_5LPE_ENABLE_VOTE_RUN	BIT(21)
+
 #define pll_alpha_width(p)					\
 		((PLL_ALPHA_VAL_U(p) - PLL_ALPHA_VAL(p) == 4) ?	\
 				 ALPHA_REG_BITWIDTH : ALPHA_REG_16BIT_WIDTH)
@@ -1604,3 +1610,170 @@ const struct clk_ops clk_alpha_pll_agera_ops = {
 	.set_rate = clk_alpha_pll_agera_set_rate,
 };
 EXPORT_SYMBOL_GPL(clk_alpha_pll_agera_ops);
+
+static int alpha_pll_lucid_5lpe_enable(struct clk_hw *hw)
+{
+	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+	u32 val;
+	int ret;
+
+	ret = regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &val);
+	if (ret)
+		return ret;
+
+	/* If in FSM mode, just vote for it */
+	if (val & LUCID_5LPE_ENABLE_VOTE_RUN) {
+		ret = clk_enable_regmap(hw);
+		if (ret)
+			return ret;
+		return wait_for_pll_enable_lock(pll);
+	}
+
+	/* Check if PLL is already enabled, return if enabled */
+	ret = trion_pll_is_enabled(pll, pll->clkr.regmap);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_RESET_N, PLL_RESET_N);
+	if (ret)
+		return ret;
+
+	regmap_write(pll->clkr.regmap, PLL_OPMODE(pll), PLL_RUN);
+
+	ret = wait_for_pll_enable_lock(pll);
+	if (ret)
+		return ret;
+
+	/* Enable the PLL outputs */
+	ret = regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll), PLL_OUT_MASK, PLL_OUT_MASK);
+	if (ret)
+		return ret;
+
+	/* Enable the global PLL outputs */
+	return regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_OUTCTRL, PLL_OUTCTRL);
+}
+
+static void alpha_pll_lucid_5lpe_disable(struct clk_hw *hw)
+{
+	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+	u32 val;
+	int ret;
+
+	ret = regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &val);
+	if (ret)
+		return;
+
+	/* If in FSM mode, just unvote it */
+	if (val & LUCID_5LPE_ENABLE_VOTE_RUN) {
+		clk_disable_regmap(hw);
+		return;
+	}
+
+	/* Disable the global PLL output */
+	ret = regmap_update_bits(pll->clkr.regmap, PLL_MODE(pll), PLL_OUTCTRL, 0);
+	if (ret)
+		return;
+
+	/* Disable the PLL outputs */
+	ret = regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll), PLL_OUT_MASK, 0);
+	if (ret)
+		return;
+
+	/* Place the PLL mode in STANDBY */
+	regmap_write(pll->clkr.regmap, PLL_OPMODE(pll), PLL_STANDBY);
+}
+
+/*
+ * The Lucid 5LPE PLL requires a power-on self-calibration which happens
+ * when the PLL comes out of reset. Calibrate in case it is not completed.
+ */
+static int alpha_pll_lucid_5lpe_prepare(struct clk_hw *hw)
+{
+	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+	struct clk_hw *p;
+	u32 val;
+	int ret;
+
+	/* Return early if calibration is not needed. */
+	regmap_read(pll->clkr.regmap, PLL_MODE(pll), &val);
+	if (val & LUCID_5LPE_PCAL_DONE)
+		return 0;
+
+	p = clk_hw_get_parent(hw);
+	if (!p)
+		return -EINVAL;
+
+	ret = alpha_pll_lucid_5lpe_enable(hw);
+	if (ret)
+		return ret;
+
+	alpha_pll_lucid_5lpe_disable(hw);
+
+	return 0;
+}
+
+static int alpha_pll_lucid_5lpe_set_rate(struct clk_hw *hw, unsigned long rate,
+					 unsigned long prate)
+{
+	return __alpha_pll_trion_set_rate(hw, rate, prate,
+					  LUCID_5LPE_PLL_LATCH_INPUT,
+					  LUCID_5LPE_ALPHA_PLL_ACK_LATCH);
+}
+
+static int clk_lucid_5lpe_pll_postdiv_set_rate(struct clk_hw *hw, unsigned long rate,
+					       unsigned long parent_rate)
+{
+	struct clk_alpha_pll_postdiv *pll = to_clk_alpha_pll_postdiv(hw);
+	int i, val = 0, div, ret;
+	u32 mask;
+
+	/*
+	 * If the PLL is in FSM mode, then treat set_rate callback as a
+	 * no-operation.
+	 */
+	ret = regmap_read(pll->clkr.regmap, PLL_USER_CTL(pll), &val);
+	if (ret)
+		return ret;
+
+	if (val & LUCID_5LPE_ENABLE_VOTE_RUN)
+		return 0;
+
+	div = DIV_ROUND_UP_ULL((u64)parent_rate, rate);
+	for (i = 0; i < pll->num_post_div; i++) {
+		if (pll->post_div_table[i].div == div) {
+			val = pll->post_div_table[i].val;
+			break;
+		}
+	}
+
+	mask = GENMASK(pll->width + pll->post_div_shift - 1, pll->post_div_shift);
+	return regmap_update_bits(pll->clkr.regmap, PLL_USER_CTL(pll),
+				  mask, val << pll->post_div_shift);
+}
+
+const struct clk_ops clk_alpha_pll_lucid_5lpe_ops = {
+	.prepare = alpha_pll_lucid_5lpe_prepare,
+	.enable = alpha_pll_lucid_5lpe_enable,
+	.disable = alpha_pll_lucid_5lpe_disable,
+	.is_enabled = clk_trion_pll_is_enabled,
+	.recalc_rate = clk_trion_pll_recalc_rate,
+	.round_rate = clk_alpha_pll_round_rate,
+	.set_rate = alpha_pll_lucid_5lpe_set_rate,
+};
+EXPORT_SYMBOL(clk_alpha_pll_lucid_5lpe_ops);
+
+const struct clk_ops clk_alpha_pll_fixed_lucid_5lpe_ops = {
+	.enable = alpha_pll_lucid_5lpe_enable,
+	.disable = alpha_pll_lucid_5lpe_disable,
+	.is_enabled = clk_trion_pll_is_enabled,
+	.recalc_rate = clk_trion_pll_recalc_rate,
+	.round_rate = clk_alpha_pll_round_rate,
+};
+EXPORT_SYMBOL(clk_alpha_pll_fixed_lucid_5lpe_ops);
+
+const struct clk_ops clk_alpha_pll_postdiv_lucid_5lpe_ops = {
+	.recalc_rate = clk_alpha_pll_postdiv_fabia_recalc_rate,
+	.round_rate = clk_alpha_pll_postdiv_fabia_round_rate,
+	.set_rate = clk_lucid_5lpe_pll_postdiv_set_rate,
+};
+EXPORT_SYMBOL(clk_alpha_pll_postdiv_lucid_5lpe_ops);
diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
index 0ea30d2f3da1..6943e933be0f 100644
--- a/drivers/clk/qcom/clk-alpha-pll.h
+++ b/drivers/clk/qcom/clk-alpha-pll.h
@@ -144,6 +144,10 @@ extern const struct clk_ops clk_alpha_pll_lucid_ops;
 extern const struct clk_ops clk_alpha_pll_postdiv_lucid_ops;
 extern const struct clk_ops clk_alpha_pll_agera_ops;
 
+extern const struct clk_ops clk_alpha_pll_lucid_5lpe_ops;
+extern const struct clk_ops clk_alpha_pll_fixed_lucid_5lpe_ops;
+extern const struct clk_ops clk_alpha_pll_postdiv_lucid_5lpe_ops;
+
 void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
 			     const struct alpha_pll_config *config);
 void clk_fabia_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
-- 
2.26.2


  parent reply	other threads:[~2021-01-18  4:45 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-18  4:43 [PATCH v4 0/5] Add clock drivers for SM8350 Vinod Koul
2021-01-18  4:43 ` [PATCH v4 1/5] clk: qcom: clk-alpha-pll: replace regval with val Vinod Koul
2021-01-25 17:13   ` Bjorn Andersson
2021-01-18  4:43 ` [PATCH v4 2/5] clk: qcom: clk-alpha-pll: modularize alpha_pll_trion_set_rate() Vinod Koul
2021-01-25 17:14   ` Bjorn Andersson
2021-01-18  4:43 ` Vinod Koul [this message]
2021-01-19 21:54   ` [PATCH v4 3/5] clk: qcom: clk-alpha-pll: Add support for Lucid 5LPE PLL AngeloGioacchino Del Regno
2021-01-25 17:18   ` Bjorn Andersson
2021-01-26  7:59     ` Vinod Koul
2021-01-18  4:43 ` [PATCH v4 4/5] dt-bindings: clock: Add SM8350 GCC clock bindings Vinod Koul
2021-01-25 17:25   ` Bjorn Andersson
2021-01-26  8:00     ` Vinod Koul
2021-01-26 14:17       ` Bjorn Andersson
2021-01-18  4:43 ` [PATCH v4 5/5] clk: qcom: gcc: Add clock driver for SM8350 Vinod Koul
2021-01-25 17:44   ` Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210118044321.2571775-4-vkoul@kernel.org \
    --to=vkoul@kernel.org \
    --cc=agross@kernel.org \
    --cc=angelogioacchino.delregno@somainline.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jshriram@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=tdas@codeaurora.org \
    --cc=viveka@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.