All of lore.kernel.org
 help / color / mirror / Atom feed
From: Oleksij Rempel <o.rempel@pengutronix.de>
To: Mark Rutland <mark.rutland@arm.com>,
	Rob Herring <robh+dt@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Shawn Guo <shawnguo@kernel.org>,
	Thierry Reding <thierry.reding@gmail.com>,
	Sam Ravnborg <sam@ravnborg.org>, David Airlie <airlied@linux.ie>,
	Daniel Vetter <daniel@ffwll.ch>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>,
	Robin van der Gracht <robin@protonic.nl>,
	devicetree@vger.kernel.org, Fabio Estevam <festevam@gmail.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, NXP Linux Team <linux-imx@nxp.com>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	David Jander <david@protonic.nl>,
	dri-devel@lists.freedesktop.org
Subject: [PATCH v1 4/7] ARM: dts: imx6dl-prtvt7: add TSC2046 touchscreen node
Date: Wed, 20 Jan 2021 15:22:14 +0100	[thread overview]
Message-ID: <20210120142217.29652-5-o.rempel@pengutronix.de> (raw)
In-Reply-To: <20210120142217.29652-1-o.rempel@pengutronix.de>

Add touchscreen support to the Protonic VT7 board.

Co-Developed-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/boot/dts/imx6dl-prtvt7.dts | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm/boot/dts/imx6dl-prtvt7.dts b/arch/arm/boot/dts/imx6dl-prtvt7.dts
index d9cb1e41cc10..63ae2065834c 100644
--- a/arch/arm/boot/dts/imx6dl-prtvt7.dts
+++ b/arch/arm/boot/dts/imx6dl-prtvt7.dts
@@ -266,6 +266,26 @@ &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi2>;
 	status = "okay";
+
+	touchscreen@0 {
+		compatible = "ti,tsc2046";
+		reg = <0>;
+		pinctrl-0 = <&pinctrl_tsc>;
+		pinctrl-names ="default";
+		spi-max-frequency = <100000>;
+		interrupts-extended = <&gpio3 20 IRQ_TYPE_EDGE_FALLING>;
+		pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
+
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+		touchscreen-max-pressure = <4095>;
+
+		ti,vref-delay-usecs = /bits/ 16 <100>;
+		ti,x-plate-ohms = /bits/ 16 <800>;
+		ti,y-plate-ohms = /bits/ 16 <300>;
+
+		wakeup-source;
+	};
 };
 
 &i2c1 {
-- 
2.30.0


WARNING: multiple messages have this Message-ID (diff)
From: Oleksij Rempel <o.rempel@pengutronix.de>
To: Mark Rutland <mark.rutland@arm.com>,
	Rob Herring <robh+dt@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Shawn Guo <shawnguo@kernel.org>,
	Thierry Reding <thierry.reding@gmail.com>,
	Sam Ravnborg <sam@ravnborg.org>, David Airlie <airlied@linux.ie>,
	Daniel Vetter <daniel@ffwll.ch>
Cc: devicetree@vger.kernel.org,
	Robin van der Gracht <robin@protonic.nl>,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	Oleksij Rempel <o.rempel@pengutronix.de>,
	NXP Linux Team <linux-imx@nxp.com>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	David Jander <david@protonic.nl>,
	Fabio Estevam <festevam@gmail.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v1 4/7] ARM: dts: imx6dl-prtvt7: add TSC2046 touchscreen node
Date: Wed, 20 Jan 2021 15:22:14 +0100	[thread overview]
Message-ID: <20210120142217.29652-5-o.rempel@pengutronix.de> (raw)
In-Reply-To: <20210120142217.29652-1-o.rempel@pengutronix.de>

Add touchscreen support to the Protonic VT7 board.

Co-Developed-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/boot/dts/imx6dl-prtvt7.dts | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm/boot/dts/imx6dl-prtvt7.dts b/arch/arm/boot/dts/imx6dl-prtvt7.dts
index d9cb1e41cc10..63ae2065834c 100644
--- a/arch/arm/boot/dts/imx6dl-prtvt7.dts
+++ b/arch/arm/boot/dts/imx6dl-prtvt7.dts
@@ -266,6 +266,26 @@ &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi2>;
 	status = "okay";
+
+	touchscreen@0 {
+		compatible = "ti,tsc2046";
+		reg = <0>;
+		pinctrl-0 = <&pinctrl_tsc>;
+		pinctrl-names ="default";
+		spi-max-frequency = <100000>;
+		interrupts-extended = <&gpio3 20 IRQ_TYPE_EDGE_FALLING>;
+		pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
+
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+		touchscreen-max-pressure = <4095>;
+
+		ti,vref-delay-usecs = /bits/ 16 <100>;
+		ti,x-plate-ohms = /bits/ 16 <800>;
+		ti,y-plate-ohms = /bits/ 16 <300>;
+
+		wakeup-source;
+	};
 };
 
 &i2c1 {
-- 
2.30.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Oleksij Rempel <o.rempel@pengutronix.de>
To: Mark Rutland <mark.rutland@arm.com>,
	Rob Herring <robh+dt@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Shawn Guo <shawnguo@kernel.org>,
	Thierry Reding <thierry.reding@gmail.com>,
	Sam Ravnborg <sam@ravnborg.org>, David Airlie <airlied@linux.ie>,
	Daniel Vetter <daniel@ffwll.ch>
Cc: devicetree@vger.kernel.org,
	Robin van der Gracht <robin@protonic.nl>,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	Oleksij Rempel <o.rempel@pengutronix.de>,
	NXP Linux Team <linux-imx@nxp.com>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	David Jander <david@protonic.nl>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v1 4/7] ARM: dts: imx6dl-prtvt7: add TSC2046 touchscreen node
Date: Wed, 20 Jan 2021 15:22:14 +0100	[thread overview]
Message-ID: <20210120142217.29652-5-o.rempel@pengutronix.de> (raw)
In-Reply-To: <20210120142217.29652-1-o.rempel@pengutronix.de>

Add touchscreen support to the Protonic VT7 board.

Co-Developed-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/boot/dts/imx6dl-prtvt7.dts | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm/boot/dts/imx6dl-prtvt7.dts b/arch/arm/boot/dts/imx6dl-prtvt7.dts
index d9cb1e41cc10..63ae2065834c 100644
--- a/arch/arm/boot/dts/imx6dl-prtvt7.dts
+++ b/arch/arm/boot/dts/imx6dl-prtvt7.dts
@@ -266,6 +266,26 @@ &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi2>;
 	status = "okay";
+
+	touchscreen@0 {
+		compatible = "ti,tsc2046";
+		reg = <0>;
+		pinctrl-0 = <&pinctrl_tsc>;
+		pinctrl-names ="default";
+		spi-max-frequency = <100000>;
+		interrupts-extended = <&gpio3 20 IRQ_TYPE_EDGE_FALLING>;
+		pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
+
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+		touchscreen-max-pressure = <4095>;
+
+		ti,vref-delay-usecs = /bits/ 16 <100>;
+		ti,x-plate-ohms = /bits/ 16 <800>;
+		ti,y-plate-ohms = /bits/ 16 <300>;
+
+		wakeup-source;
+	};
 };
 
 &i2c1 {
-- 
2.30.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  parent reply	other threads:[~2021-01-20 15:34 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-20 14:22 [PATCH v1 0/7] devicetree fixes for Protonic and Plymovent boards Oleksij Rempel
2021-01-20 14:22 ` Oleksij Rempel
2021-01-20 14:22 ` Oleksij Rempel
2021-01-20 14:22 ` [PATCH v1 1/7] dt-bindings: display: simple: add Innolux G070Y2-T02 panel Oleksij Rempel
2021-01-20 14:22   ` Oleksij Rempel
2021-01-20 14:22   ` Oleksij Rempel
2021-01-20 14:22 ` [PATCH v1 2/7] drm: panel-simple: Add support for the " Oleksij Rempel
2021-01-20 14:22   ` Oleksij Rempel
2021-01-20 14:22   ` Oleksij Rempel
2021-01-20 14:22 ` [PATCH v1 3/7] ARM: dts: imx6dl-prtvt7: Add display and panel nodes Oleksij Rempel
2021-01-20 14:22   ` Oleksij Rempel
2021-01-20 14:22   ` Oleksij Rempel
2021-01-20 14:22 ` Oleksij Rempel [this message]
2021-01-20 14:22   ` [PATCH v1 4/7] ARM: dts: imx6dl-prtvt7: add TSC2046 touchscreen node Oleksij Rempel
2021-01-20 14:22   ` Oleksij Rempel
2021-01-20 14:47   ` robin
2021-01-20 14:47     ` robin
2021-01-20 14:47     ` robin
2021-01-20 14:22 ` [PATCH v1 5/7] ARM: dts: imx6dl-prtvt7: Remove backlight enable gpio Oleksij Rempel
2021-01-20 14:22   ` Oleksij Rempel
2021-01-20 14:22   ` Oleksij Rempel
2021-01-20 14:22 ` [PATCH v1 6/7] ARM: dts: imx6dl-prtvt7: fix PWM cell count for the backlight node Oleksij Rempel
2021-01-20 14:22   ` Oleksij Rempel
2021-01-20 14:22   ` Oleksij Rempel
2021-01-20 14:22 ` [PATCH v1 7/7] ARM: dts: imx6dl-plym2m: remove touchscreen-size-* properties Oleksij Rempel
2021-01-20 14:22   ` Oleksij Rempel
2021-01-20 14:22   ` Oleksij Rempel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210120142217.29652-5-o.rempel@pengutronix.de \
    --to=o.rempel@pengutronix.de \
    --cc=airlied@linux.ie \
    --cc=daniel@ffwll.ch \
    --cc=david@protonic.nl \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=robin@protonic.nl \
    --cc=s.hauer@pengutronix.de \
    --cc=sam@ravnborg.org \
    --cc=shawnguo@kernel.org \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.