All of lore.kernel.org
 help / color / mirror / Atom feed
From: Chris Wilson <chris@chris-wilson.co.uk>
To: intel-gfx@lists.freedesktop.org
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Subject: [Intel-gfx] [PATCH] drm/i915/gt: Call stop_ring() from ring resume, again
Date: Wed, 20 Jan 2021 23:28:35 +0000	[thread overview]
Message-ID: <20210120232835.22681-1-chris@chris-wilson.co.uk> (raw)

For reasons I cannot explain, except to say this is Sandybridge after
all, call stop_ring() again dring ring resume in order to prevent
mysterious hard hangs.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
---
If this survives the night on my snb-2500, I declare victory.
---
 .../gpu/drm/i915/gt/intel_ring_submission.c   | 107 +++++++++---------
 1 file changed, 55 insertions(+), 52 deletions(-)

diff --git a/drivers/gpu/drm/i915/gt/intel_ring_submission.c b/drivers/gpu/drm/i915/gt/intel_ring_submission.c
index 4984ff565424..7eef2c6c1ed0 100644
--- a/drivers/gpu/drm/i915/gt/intel_ring_submission.c
+++ b/drivers/gpu/drm/i915/gt/intel_ring_submission.c
@@ -183,15 +183,35 @@ static void set_pp_dir(struct intel_engine_cs *engine)
 	}
 }
 
+static bool stop_ring(struct intel_engine_cs *engine)
+{
+	/* Empty the ring by skipping to the end */
+	ENGINE_WRITE_FW(engine, RING_HEAD, ENGINE_READ_FW(engine, RING_TAIL));
+	ENGINE_POSTING_READ(engine, RING_HEAD);
+
+	/* The ring must be empty before it is disabled */
+	ENGINE_WRITE_FW(engine, RING_CTL, 0);
+	ENGINE_POSTING_READ(engine, RING_CTL);
+
+	/* Then reset the disabled ring */
+	ENGINE_WRITE_FW(engine, RING_HEAD, 0);
+	ENGINE_WRITE_FW(engine, RING_TAIL, 0);
+
+	return (ENGINE_READ_FW(engine, RING_HEAD) & HEAD_ADDR) == 0;
+}
+
 static int xcs_resume(struct intel_engine_cs *engine)
 {
-	struct drm_i915_private *dev_priv = engine->i915;
 	struct intel_ring *ring = engine->legacy.ring;
 
 	ENGINE_TRACE(engine, "ring:{HEAD:%04x, TAIL:%04x}\n",
 		     ring->head, ring->tail);
 
-	if (HWS_NEEDS_PHYSICAL(dev_priv))
+	/* Double check the ring is empty & disabled before we resume */
+	if (!stop_ring(engine))
+		goto err;
+
+	if (HWS_NEEDS_PHYSICAL(engine->i915))
 		ring_setup_phys_status_page(engine);
 	else
 		ring_setup_status_page(engine);
@@ -228,21 +248,10 @@ static int xcs_resume(struct intel_engine_cs *engine)
 	if (__intel_wait_for_register_fw(engine->uncore,
 					 RING_CTL(engine->mmio_base),
 					 RING_VALID, RING_VALID,
-					 5000, 0, NULL)) {
-		drm_err(&dev_priv->drm,
-			"%s initialization failed; "
-			"ctl %08x (valid? %d) head %08x [%08x] tail %08x [%08x] start %08x [expected %08x]\n",
-			engine->name,
-			ENGINE_READ(engine, RING_CTL),
-			ENGINE_READ(engine, RING_CTL) & RING_VALID,
-			ENGINE_READ(engine, RING_HEAD), ring->head,
-			ENGINE_READ(engine, RING_TAIL), ring->tail,
-			ENGINE_READ(engine, RING_START),
-			i915_ggtt_offset(ring->vma));
-		return -EIO;
-	}
+					 5000, 0, NULL))
+		goto err;
 
-	if (INTEL_GEN(dev_priv) > 2)
+	if (INTEL_GEN(engine->i915) > 2)
 		ENGINE_WRITE_FW(engine,
 				RING_MI_MODE, _MASKED_BIT_DISABLE(STOP_RING));
 
@@ -255,6 +264,19 @@ static int xcs_resume(struct intel_engine_cs *engine)
 	/* Papering over lost _interrupts_ immediately following the restart */
 	intel_engine_signal_breadcrumbs(engine);
 	return 0;
+
+err:
+	drm_err(&engine->i915->drm,
+		"%s initialization failed; "
+		"ctl %08x (valid? %d) head %08x [%08x] tail %08x [%08x] start %08x [expected %08x]\n",
+		engine->name,
+		ENGINE_READ(engine, RING_CTL),
+		ENGINE_READ(engine, RING_CTL) & RING_VALID,
+		ENGINE_READ(engine, RING_HEAD), ring->head,
+		ENGINE_READ(engine, RING_TAIL), ring->tail,
+		ENGINE_READ(engine, RING_START),
+		i915_ggtt_offset(ring->vma));
+	return -EIO;
 }
 
 static void sanitize_hwsp(struct intel_engine_cs *engine)
@@ -290,23 +312,6 @@ static void xcs_sanitize(struct intel_engine_cs *engine)
 	clflush_cache_range(engine->status_page.addr, PAGE_SIZE);
 }
 
-static bool stop_ring(struct intel_engine_cs *engine)
-{
-	/* Empty the ring by skipping to the end */
-	ENGINE_WRITE_FW(engine, RING_HEAD, ENGINE_READ_FW(engine, RING_TAIL));
-	ENGINE_POSTING_READ(engine, RING_HEAD);
-
-	/* The ring must be empty before it is disabled */
-	ENGINE_WRITE_FW(engine, RING_CTL, 0);
-	ENGINE_POSTING_READ(engine, RING_CTL);
-
-	/* Then reset the disabled ring */
-	ENGINE_WRITE_FW(engine, RING_HEAD, 0);
-	ENGINE_WRITE_FW(engine, RING_TAIL, 0);
-
-	return (ENGINE_READ_FW(engine, RING_HEAD) & HEAD_ADDR) == 0;
-}
-
 static void reset_prepare(struct intel_engine_cs *engine)
 {
 	/*
@@ -329,25 +334,23 @@ static void reset_prepare(struct intel_engine_cs *engine)
 
 	if (!stop_ring(engine)) {
 		/* G45 ring initialization often fails to reset head to zero */
-		drm_dbg(&engine->i915->drm,
-			"%s head not reset to zero "
-			"ctl %08x head %08x tail %08x start %08x\n",
-			engine->name,
-			ENGINE_READ_FW(engine, RING_CTL),
-			ENGINE_READ_FW(engine, RING_HEAD),
-			ENGINE_READ_FW(engine, RING_TAIL),
-			ENGINE_READ_FW(engine, RING_START));
-	}
-
-	if (!stop_ring(engine)) {
-		drm_err(&engine->i915->drm,
-			"failed to set %s head to zero "
-			"ctl %08x head %08x tail %08x start %08x\n",
-			engine->name,
-			ENGINE_READ_FW(engine, RING_CTL),
-			ENGINE_READ_FW(engine, RING_HEAD),
-			ENGINE_READ_FW(engine, RING_TAIL),
-			ENGINE_READ_FW(engine, RING_START));
+		ENGINE_TRACE(engine,
+			     "HEAD not reset to zero, "
+			     "{ CTL:%08x, HEAD:%08x, TAIL:%08x, START:%08x }\n",
+			     ENGINE_READ_FW(engine, RING_CTL),
+			     ENGINE_READ_FW(engine, RING_HEAD),
+			     ENGINE_READ_FW(engine, RING_TAIL),
+			     ENGINE_READ_FW(engine, RING_START));
+		if (!stop_ring(engine)) {
+			drm_err(&engine->i915->drm,
+				"failed to set %s head to zero "
+				"ctl %08x head %08x tail %08x start %08x\n",
+				engine->name,
+				ENGINE_READ_FW(engine, RING_CTL),
+				ENGINE_READ_FW(engine, RING_HEAD),
+				ENGINE_READ_FW(engine, RING_TAIL),
+				ENGINE_READ_FW(engine, RING_START));
+		}
 	}
 }
 
-- 
2.20.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

             reply	other threads:[~2021-01-20 23:28 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-20 23:28 Chris Wilson [this message]
2021-01-21  0:31 ` [Intel-gfx] ✓ Fi.CI.BAT: success for drm/i915/gt: Call stop_ring() from ring resume, again Patchwork
2021-01-21  3:29 ` [Intel-gfx] ✗ Fi.CI.IGT: failure " Patchwork
2021-01-21 11:30 ` [Intel-gfx] [PATCH] " Chris Wilson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210120232835.22681-1-chris@chris-wilson.co.uk \
    --to=chris@chris-wilson.co.uk \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.