All of lore.kernel.org
 help / color / mirror / Atom feed
From: Wolfram Sang <wsa+renesas@sang-engineering.com>
To: linux-renesas-soc@vger.kernel.org
Cc: linux-clk@vger.kernel.org,
	Koji Matsuoka <koji.matsuoka.xm@renesas.com>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	Wolfram Sang <wsa+renesas@sang-engineering.com>
Subject: [PATCH V2 2/4] arm64: dts: renesas: Add I2C to R8A779A0
Date: Thu, 21 Jan 2021 10:54:18 +0100	[thread overview]
Message-ID: <20210121095420.5023-3-wsa+renesas@sang-engineering.com> (raw)
In-Reply-To: <20210121095420.5023-1-wsa+renesas@sang-engineering.com>

From: Koji Matsuoka <koji.matsuoka.xm@renesas.com>

Add I2C devicetree description to V3U

Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
[wsa: rebased and double checked]
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---

Changes since v1: none

 arch/arm64/boot/dts/renesas/r8a779a0.dtsi | 122 ++++++++++++++++++++++
 1 file changed, 122 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
index 25c722302de6..1d953a892309 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
@@ -14,6 +14,16 @@ / {
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -250,6 +260,118 @@ sysc: system-controller@e6180000 {
 			#power-domain-cells = <1>;
 		};
 
+		i2c0: i2c@e6500000 {
+			compatible = "renesas,i2c-r8a779a0",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			compatible = "renesas,i2c-r8a779a0",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			compatible = "renesas,i2c-r8a779a0",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			compatible = "renesas,i2c-r8a779a0",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 521>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 521>;
+			dmas = <&dmac1 0x97>, <&dmac1 0x96>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			compatible = "renesas,i2c-r8a779a0",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			dmas = <&dmac1 0x99>, <&dmac1 0x98>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e66e0000 {
+			compatible = "renesas,i2c-r8a779a0",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			dmas = <&dmac1 0x9b>, <&dmac1 0x9a>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@e66e8000 {
+			compatible = "renesas,i2c-r8a779a0",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e8000 0 0x40>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 524>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 524>;
+			dmas = <&dmac1 0x9d>, <&dmac1 0x9c>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		scif0: serial@e6e60000 {
 			compatible = "renesas,scif-r8a779a0",
 				     "renesas,rcar-gen3-scif", "renesas,scif";
-- 
2.29.2


  parent reply	other threads:[~2021-01-21  9:56 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-21  9:54 [PATCH V2 0/4] v3u: add support for I2C Wolfram Sang
2021-01-21  9:54 ` [PATCH V2 1/4] clk: renesas: r8a779a0: add clocks " Wolfram Sang
2021-01-22 10:08   ` Geert Uytterhoeven
2021-01-21  9:54 ` Wolfram Sang [this message]
2021-01-22 10:11   ` [PATCH V2 2/4] arm64: dts: renesas: Add I2C to R8A779A0 Geert Uytterhoeven
2021-01-22 10:46     ` Wolfram Sang
2021-01-22 10:51       ` Geert Uytterhoeven
2021-01-22 11:00         ` Wolfram Sang
2021-01-21  9:54 ` [PATCH V2 3/4] arm64: dts: renesas: Add I2C0,1,6 support for falcon board Wolfram Sang
2021-01-22 10:13   ` Geert Uytterhoeven
2021-01-21  9:54 ` [PATCH V2 4/4] v3u: enable other I2C busses for testing Wolfram Sang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210121095420.5023-3-wsa+renesas@sang-engineering.com \
    --to=wsa+renesas@sang-engineering.com \
    --cc=geert+renesas@glider.be \
    --cc=koji.matsuoka.xm@renesas.com \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.