All of lore.kernel.org
 help / color / mirror / Atom feed
From: Maxime Ripard <maxime@cerno.tech>
To: dri-devel@lists.freedesktop.org
Cc: Dom Cobley <popcornmix@gmail.com>,
	Ryutaroh Matsumoto <ryutaroh@ict.e.titech.ac.jp>,
	Lucas Nussbaum <lucas@debian.org>,
	Maxime Ripard <maxime@cerno.tech>,
	Dave Stevenson <dave.stevenson@raspberrypi.com>
Subject: [PATCH 1/2] drm/vc4: Correct lbm size and calculation
Date: Thu, 21 Jan 2021 11:57:58 +0100	[thread overview]
Message-ID: <20210121105759.1262699-1-maxime@cerno.tech> (raw)

From: Dom Cobley <popcornmix@gmail.com>

LBM base address is measured in units of pixels per cycle.
That is 4 for 2711 (hvs5) and 2 for 2708.

We are wasting 75% of lbm by indexing without the scaling.
But we were also using too high a size for the lbm resulting
in partial corruption (right hand side) of vertically
scaled images, usually at 4K or lower resolutions with more layers.

The physical RAM of LBM on 2711 is 8 * 1920 * 16 * 12-bit
(pixels are stored 12-bits per component regardless of format).

The LBM adress indexes work in units of pixels per clock,
so for 4 pixels per clock that means we have 32 * 1920 = 60K

Fixes: c54619b0bfb3 ("drm/vc4: Add support for the BCM2711 HVS5")
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hvs.c   | 8 ++++----
 drivers/gpu/drm/vc4/vc4_plane.c | 7 ++++++-
 2 files changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hvs.c b/drivers/gpu/drm/vc4/vc4_hvs.c
index 2b3a597fa65f..c239045e05d6 100644
--- a/drivers/gpu/drm/vc4/vc4_hvs.c
+++ b/drivers/gpu/drm/vc4/vc4_hvs.c
@@ -622,11 +622,11 @@ static int vc4_hvs_bind(struct device *dev, struct device *master, void *data)
 	 * for now we just allocate globally.
 	 */
 	if (!hvs->hvs5)
-		/* 96kB */
-		drm_mm_init(&hvs->lbm_mm, 0, 96 * 1024);
+		/* 48k words of 2x12-bit pixels */
+		drm_mm_init(&hvs->lbm_mm, 0, 48 * 1024);
 	else
-		/* 70k words */
-		drm_mm_init(&hvs->lbm_mm, 0, 70 * 2 * 1024);
+		/* 60k words of 4x12-bit pixels */
+		drm_mm_init(&hvs->lbm_mm, 0, 60 * 1024);
 
 	/* Upload filter kernels.  We only have the one for now, so we
 	 * keep it around for the lifetime of the driver.
diff --git a/drivers/gpu/drm/vc4/vc4_plane.c b/drivers/gpu/drm/vc4/vc4_plane.c
index 6bd8260aa9f2..b98eabb52920 100644
--- a/drivers/gpu/drm/vc4/vc4_plane.c
+++ b/drivers/gpu/drm/vc4/vc4_plane.c
@@ -437,6 +437,7 @@ static void vc4_write_ppf(struct vc4_plane_state *vc4_state, u32 src, u32 dst)
 static u32 vc4_lbm_size(struct drm_plane_state *state)
 {
 	struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
+	struct vc4_dev *vc4 = to_vc4_dev(state->plane->dev);
 	u32 pix_per_line;
 	u32 lbm;
 
@@ -472,7 +473,11 @@ static u32 vc4_lbm_size(struct drm_plane_state *state)
 		lbm = pix_per_line * 16;
 	}
 
-	lbm = roundup(lbm, 32);
+	/* Align it to 64 or 128 (hvs5) bytes */
+	lbm = roundup(lbm, vc4->hvs->hvs5 ? 128 : 64);
+
+	/* Each "word" of the LBM memory contains 2 or 4 (hvs5) pixels */
+	lbm /= vc4->hvs->hvs5 ? 4 : 2;
 
 	return lbm;
 }
-- 
2.29.2

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

             reply	other threads:[~2021-01-22  8:46 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-21 10:57 Maxime Ripard [this message]
2021-01-21 10:57 ` [PATCH 2/2] drm/vc4: Correct POS1_SCL for hvs5 Maxime Ripard
2021-01-22 10:14   ` Dave Stevenson
2021-01-23  8:05   ` Lucas Nussbaum
2021-01-23 11:14     ` Ryutaroh Matsumoto
2021-01-25 10:54       ` Maxime Ripard
2021-01-21 11:04 ` [PATCH 1/2] drm/vc4: Correct lbm size and calculation Maxime Ripard
2021-01-21 16:26   ` Lucas Nussbaum
2021-01-22  5:11     ` Ryutaroh Matsumoto
2021-01-22 10:54     ` Maxime Ripard
2021-01-22 10:12 ` Dave Stevenson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210121105759.1262699-1-maxime@cerno.tech \
    --to=maxime@cerno.tech \
    --cc=dave.stevenson@raspberrypi.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=lucas@debian.org \
    --cc=popcornmix@gmail.com \
    --cc=ryutaroh@ict.e.titech.ac.jp \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.