From: Bard Liao <yung-chuan.liao@linux.intel.com> To: alsa-devel@alsa-project.org, vkoul@kernel.org Cc: vinod.koul@linaro.org, linux-kernel@vger.kernel.org, tiwai@suse.de, broonie@kernel.org, gregkh@linuxfoundation.org, jank@cadence.com, srinivas.kandagatla@linaro.org, rander.wang@linux.intel.com, ranjani.sridharan@linux.intel.com, hui.wang@canonical.com, pierre-louis.bossart@linux.intel.com, sanyog.r.kale@intel.com, bard.liao@intel.com Subject: [RESEND PATCH v2 1/9] soundwire: bus: use sdw_update_no_pm when initializing a device Date: Fri, 22 Jan 2021 15:06:26 +0800 [thread overview] Message-ID: <20210122070634.12825-2-yung-chuan.liao@linux.intel.com> (raw) In-Reply-To: <20210122070634.12825-1-yung-chuan.liao@linux.intel.com> From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> When a Slave device is resumed, it may resume the bus and restart the enumeration. During that process, we absolutely don't want to call regular read/write routines which will wait for the resume to complete, otherwise a deadlock occurs. Fixes: 60ee9be25571 ('soundwire: bus: add PM/no-PM versions of read/write functions') Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> --- drivers/soundwire/bus.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c index d1e8c3a54976..60c42508c6c6 100644 --- a/drivers/soundwire/bus.c +++ b/drivers/soundwire/bus.c @@ -489,6 +489,18 @@ sdw_read_no_pm(struct sdw_slave *slave, u32 addr) return buf; } +static int sdw_update_no_pm(struct sdw_slave *slave, u32 addr, u8 mask, u8 val) +{ + int tmp; + + tmp = sdw_read_no_pm(slave, addr); + if (tmp < 0) + return tmp; + + tmp = (tmp & ~mask) | val; + return sdw_write_no_pm(slave, addr, tmp); +} + /** * sdw_nread() - Read "n" contiguous SDW Slave registers * @slave: SDW Slave @@ -1256,7 +1268,7 @@ static int sdw_initialize_slave(struct sdw_slave *slave) val = slave->prop.scp_int1_mask; /* Enable SCP interrupts */ - ret = sdw_update(slave, SDW_SCP_INTMASK1, val, val); + ret = sdw_update_no_pm(slave, SDW_SCP_INTMASK1, val, val); if (ret < 0) { dev_err(slave->bus->dev, "SDW_SCP_INTMASK1 write failed:%d\n", ret); @@ -1271,7 +1283,7 @@ static int sdw_initialize_slave(struct sdw_slave *slave) val = prop->dp0_prop->imp_def_interrupts; val |= SDW_DP0_INT_PORT_READY | SDW_DP0_INT_BRA_FAILURE; - ret = sdw_update(slave, SDW_DP0_INTMASK, val, val); + ret = sdw_update_no_pm(slave, SDW_DP0_INTMASK, val, val); if (ret < 0) dev_err(slave->bus->dev, "SDW_DP0_INTMASK read failed:%d\n", ret); -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Bard Liao <yung-chuan.liao@linux.intel.com> To: alsa-devel@alsa-project.org, vkoul@kernel.org Cc: pierre-louis.bossart@linux.intel.com, vinod.koul@linaro.org, tiwai@suse.de, gregkh@linuxfoundation.org, linux-kernel@vger.kernel.org, ranjani.sridharan@linux.intel.com, hui.wang@canonical.com, broonie@kernel.org, srinivas.kandagatla@linaro.org, jank@cadence.com, sanyog.r.kale@intel.com, rander.wang@linux.intel.com, bard.liao@intel.com Subject: [RESEND PATCH v2 1/9] soundwire: bus: use sdw_update_no_pm when initializing a device Date: Fri, 22 Jan 2021 15:06:26 +0800 [thread overview] Message-ID: <20210122070634.12825-2-yung-chuan.liao@linux.intel.com> (raw) In-Reply-To: <20210122070634.12825-1-yung-chuan.liao@linux.intel.com> From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> When a Slave device is resumed, it may resume the bus and restart the enumeration. During that process, we absolutely don't want to call regular read/write routines which will wait for the resume to complete, otherwise a deadlock occurs. Fixes: 60ee9be25571 ('soundwire: bus: add PM/no-PM versions of read/write functions') Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> --- drivers/soundwire/bus.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c index d1e8c3a54976..60c42508c6c6 100644 --- a/drivers/soundwire/bus.c +++ b/drivers/soundwire/bus.c @@ -489,6 +489,18 @@ sdw_read_no_pm(struct sdw_slave *slave, u32 addr) return buf; } +static int sdw_update_no_pm(struct sdw_slave *slave, u32 addr, u8 mask, u8 val) +{ + int tmp; + + tmp = sdw_read_no_pm(slave, addr); + if (tmp < 0) + return tmp; + + tmp = (tmp & ~mask) | val; + return sdw_write_no_pm(slave, addr, tmp); +} + /** * sdw_nread() - Read "n" contiguous SDW Slave registers * @slave: SDW Slave @@ -1256,7 +1268,7 @@ static int sdw_initialize_slave(struct sdw_slave *slave) val = slave->prop.scp_int1_mask; /* Enable SCP interrupts */ - ret = sdw_update(slave, SDW_SCP_INTMASK1, val, val); + ret = sdw_update_no_pm(slave, SDW_SCP_INTMASK1, val, val); if (ret < 0) { dev_err(slave->bus->dev, "SDW_SCP_INTMASK1 write failed:%d\n", ret); @@ -1271,7 +1283,7 @@ static int sdw_initialize_slave(struct sdw_slave *slave) val = prop->dp0_prop->imp_def_interrupts; val |= SDW_DP0_INT_PORT_READY | SDW_DP0_INT_BRA_FAILURE; - ret = sdw_update(slave, SDW_DP0_INTMASK, val, val); + ret = sdw_update_no_pm(slave, SDW_DP0_INTMASK, val, val); if (ret < 0) dev_err(slave->bus->dev, "SDW_DP0_INTMASK read failed:%d\n", ret); -- 2.17.1
next prev parent reply other threads:[~2021-01-22 7:10 UTC|newest] Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-01-22 7:06 [RESEND PATCH v2 0/9] soundwire/regmap: use _no_pm routines Bard Liao 2021-01-22 7:06 ` Bard Liao 2021-01-22 7:06 ` Bard Liao [this message] 2021-01-22 7:06 ` [RESEND PATCH v2 1/9] soundwire: bus: use sdw_update_no_pm when initializing a device Bard Liao 2021-01-22 7:06 ` [RESEND PATCH v2 2/9] soundwire: bus: use sdw_write_no_pm when setting the bus scale registers Bard Liao 2021-01-22 7:06 ` Bard Liao 2021-01-22 7:06 ` [RESEND PATCH v2 3/9] soundwire: bus: use no_pm IO routines for all interrupt handling Bard Liao 2021-01-22 7:06 ` Bard Liao 2021-01-22 7:06 ` [RESEND PATCH v2 4/9] soundwire: export sdw_write/read_no_pm functions Bard Liao 2021-01-22 7:06 ` Bard Liao 2021-01-22 7:06 ` [RESEND PATCH v2 5/9] regmap: sdw: use _no_pm functions in regmap_read/write Bard Liao 2021-01-22 7:06 ` Bard Liao 2021-01-22 7:06 ` [RESEND PATCH v2 6/9] regmap: sdw: use no_pm routines for SoundWire 1.2 MBQ Bard Liao 2021-01-22 7:06 ` Bard Liao 2021-01-22 7:06 ` [RESEND PATCH v2 7/9] regmap: sdw-mbq: use MODULE_LICENSE("GPL") Bard Liao 2021-01-22 7:06 ` Bard Liao 2021-01-22 7:06 ` [RESEND PATCH v2 8/9] soundwire: bus: fix confusion on device used by pm_runtime Bard Liao 2021-01-22 7:06 ` Bard Liao 2021-01-22 7:06 ` [RESEND PATCH v2 9/9] soundwire: bus: clarify dev_err/dbg device references Bard Liao 2021-01-22 7:06 ` Bard Liao 2021-02-06 10:26 ` [RESEND PATCH v2 0/9] soundwire/regmap: use _no_pm routines Vinod Koul 2021-02-06 10:26 ` Vinod Koul 2021-02-08 12:50 ` Mark Brown 2021-02-08 12:50 ` Mark Brown 2021-02-08 15:04 ` Vinod Koul 2021-02-08 15:04 ` Vinod Koul 2021-02-10 19:58 ` Mark Brown 2021-02-10 19:58 ` Mark Brown 2021-02-11 5:25 ` Vinod Koul 2021-02-11 5:25 ` Vinod Koul
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210122070634.12825-2-yung-chuan.liao@linux.intel.com \ --to=yung-chuan.liao@linux.intel.com \ --cc=alsa-devel@alsa-project.org \ --cc=bard.liao@intel.com \ --cc=broonie@kernel.org \ --cc=gregkh@linuxfoundation.org \ --cc=hui.wang@canonical.com \ --cc=jank@cadence.com \ --cc=linux-kernel@vger.kernel.org \ --cc=pierre-louis.bossart@linux.intel.com \ --cc=rander.wang@linux.intel.com \ --cc=ranjani.sridharan@linux.intel.com \ --cc=sanyog.r.kale@intel.com \ --cc=srinivas.kandagatla@linaro.org \ --cc=tiwai@suse.de \ --cc=vinod.koul@linaro.org \ --cc=vkoul@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.