From: Vincenzo Frascino <vincenzo.frascino@arm.com> To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, kasan-dev@googlegroups.com Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>, Catalin Marinas <catalin.marinas@arm.com>, Will Deacon <will@kernel.org>, Dmitry Vyukov <dvyukov@google.com>, Andrey Ryabinin <aryabinin@virtuozzo.com>, Alexander Potapenko <glider@google.com>, Marco Elver <elver@google.com>, Evgenii Stepanov <eugenis@google.com>, Branislav Rankov <Branislav.Rankov@arm.com>, Andrey Konovalov <andreyknvl@google.com> Subject: [PATCH v6 2/4] kasan: Add KASAN mode kernel parameter Date: Fri, 22 Jan 2021 13:59:53 +0000 [thread overview] Message-ID: <20210122135955.30237-3-vincenzo.frascino@arm.com> (raw) In-Reply-To: <20210122135955.30237-1-vincenzo.frascino@arm.com> Architectures supported by KASAN_HW_TAGS can provide a sync or async mode of execution. On an MTE enabled arm64 hw for example this can be identified with the synchronous or asynchronous tagging mode of execution. In synchronous mode, an exception is triggered if a tag check fault occurs. In asynchronous mode, if a tag check fault occurs, the TFSR_EL1 register is updated asynchronously. The kernel checks the corresponding bits periodically. KASAN requires a specific kernel command line parameter to make use of this hw features. Add KASAN HW execution mode kernel command line parameter. Note: This patch adds the kasan.mode kernel parameter and the sync/async kernel command line options to enable the described features. Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> --- Documentation/dev-tools/kasan.rst | 9 +++++++++ lib/test_kasan.c | 2 +- mm/kasan/hw_tags.c | 32 ++++++++++++++++++++++++++++++- mm/kasan/kasan.h | 6 ++++-- 4 files changed, 45 insertions(+), 4 deletions(-) diff --git a/Documentation/dev-tools/kasan.rst b/Documentation/dev-tools/kasan.rst index e022b7506e37..e3dca4d1f2a7 100644 --- a/Documentation/dev-tools/kasan.rst +++ b/Documentation/dev-tools/kasan.rst @@ -161,6 +161,15 @@ particular KASAN features. - ``kasan=off`` or ``=on`` controls whether KASAN is enabled (default: ``on``). +- ``kasan.mode=sync`` or ``=async`` controls whether KASAN is configured in + synchronous or asynchronous mode of execution (default: ``sync``). + Synchronous mode: a bad access is detected immediately when a tag + check fault occurs. + Asynchronous mode: a bad access detection is delayed. When a tag check + fault occurs, the information is stored in hardware (in the TFSR_EL1 + register for arm64). The kernel periodically checks the hardware and + only reports tag faults during these checks. + - ``kasan.stacktrace=off`` or ``=on`` disables or enables alloc and free stack traces collection (default: ``on`` for ``CONFIG_DEBUG_KERNEL=y``, otherwise ``off``). diff --git a/lib/test_kasan.c b/lib/test_kasan.c index d16ec9e66806..7285dcf9fcc1 100644 --- a/lib/test_kasan.c +++ b/lib/test_kasan.c @@ -97,7 +97,7 @@ static void kasan_test_exit(struct kunit *test) READ_ONCE(fail_data.report_found)); \ if (IS_ENABLED(CONFIG_KASAN_HW_TAGS)) { \ if (READ_ONCE(fail_data.report_found)) \ - hw_enable_tagging(); \ + hw_enable_tagging_sync(); \ migrate_enable(); \ } \ } while (0) diff --git a/mm/kasan/hw_tags.c b/mm/kasan/hw_tags.c index e529428e7a11..308a879a3798 100644 --- a/mm/kasan/hw_tags.c +++ b/mm/kasan/hw_tags.c @@ -25,6 +25,12 @@ enum kasan_arg { KASAN_ARG_ON, }; +enum kasan_arg_mode { + KASAN_ARG_MODE_DEFAULT, + KASAN_ARG_MODE_SYNC, + KASAN_ARG_MODE_ASYNC, +}; + enum kasan_arg_stacktrace { KASAN_ARG_STACKTRACE_DEFAULT, KASAN_ARG_STACKTRACE_OFF, @@ -38,6 +44,7 @@ enum kasan_arg_fault { }; static enum kasan_arg kasan_arg __ro_after_init; +static enum kasan_arg_mode kasan_arg_mode __ro_after_init; static enum kasan_arg_stacktrace kasan_arg_stacktrace __ro_after_init; static enum kasan_arg_fault kasan_arg_fault __ro_after_init; @@ -68,6 +75,21 @@ static int __init early_kasan_flag(char *arg) } early_param("kasan", early_kasan_flag); +/* kasan.mode=sync/async */ +static int __init early_kasan_mode(char *arg) +{ + /* If arg is not set the default mode is sync */ + if ((!arg) || !strcmp(arg, "sync")) + kasan_arg_mode = KASAN_ARG_MODE_SYNC; + else if (!strcmp(arg, "async")) + kasan_arg_mode = KASAN_ARG_MODE_ASYNC; + else + return -EINVAL; + + return 0; +} +early_param("kasan.mode", early_kasan_mode); + /* kasan.stacktrace=off/on */ static int __init early_kasan_flag_stacktrace(char *arg) { @@ -115,7 +137,15 @@ void kasan_init_hw_tags_cpu(void) return; hw_init_tags(KASAN_TAG_MAX); - hw_enable_tagging(); + + /* + * Enable async mode only when explicitly requested through + * the command line. + */ + if (kasan_arg_mode == KASAN_ARG_MODE_ASYNC) + hw_enable_tagging_async(); + else + hw_enable_tagging_sync(); } /* kasan_init_hw_tags() is called once on boot CPU. */ diff --git a/mm/kasan/kasan.h b/mm/kasan/kasan.h index 07ef7fc742ad..3923d9744105 100644 --- a/mm/kasan/kasan.h +++ b/mm/kasan/kasan.h @@ -294,7 +294,8 @@ static inline const void *arch_kasan_set_tag(const void *addr, u8 tag) #define arch_set_mem_tag_range(addr, size, tag) ((void *)(addr)) #endif -#define hw_enable_tagging() arch_enable_tagging() +#define hw_enable_tagging_sync() arch_enable_tagging_sync() +#define hw_enable_tagging_async() arch_enable_tagging_async() #define hw_init_tags(max_tag) arch_init_tags(max_tag) #define hw_set_tagging_report_once(state) arch_set_tagging_report_once(state) #define hw_get_random_tag() arch_get_random_tag() @@ -303,7 +304,8 @@ static inline const void *arch_kasan_set_tag(const void *addr, u8 tag) #else /* CONFIG_KASAN_HW_TAGS */ -#define hw_enable_tagging() +#define hw_enable_tagging_sync() +#define hw_enable_tagging_async() #define hw_set_tagging_report_once(state) #endif /* CONFIG_KASAN_HW_TAGS */ -- 2.30.0
WARNING: multiple messages have this Message-ID (diff)
From: Vincenzo Frascino <vincenzo.frascino@arm.com> To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, kasan-dev@googlegroups.com Cc: Marco Elver <elver@google.com>, Catalin Marinas <catalin.marinas@arm.com>, Branislav Rankov <Branislav.Rankov@arm.com>, Alexander Potapenko <glider@google.com>, Evgenii Stepanov <eugenis@google.com>, Andrey Konovalov <andreyknvl@google.com>, Andrey Ryabinin <aryabinin@virtuozzo.com>, Vincenzo Frascino <vincenzo.frascino@arm.com>, Will Deacon <will@kernel.org>, Dmitry Vyukov <dvyukov@google.com> Subject: [PATCH v6 2/4] kasan: Add KASAN mode kernel parameter Date: Fri, 22 Jan 2021 13:59:53 +0000 [thread overview] Message-ID: <20210122135955.30237-3-vincenzo.frascino@arm.com> (raw) In-Reply-To: <20210122135955.30237-1-vincenzo.frascino@arm.com> Architectures supported by KASAN_HW_TAGS can provide a sync or async mode of execution. On an MTE enabled arm64 hw for example this can be identified with the synchronous or asynchronous tagging mode of execution. In synchronous mode, an exception is triggered if a tag check fault occurs. In asynchronous mode, if a tag check fault occurs, the TFSR_EL1 register is updated asynchronously. The kernel checks the corresponding bits periodically. KASAN requires a specific kernel command line parameter to make use of this hw features. Add KASAN HW execution mode kernel command line parameter. Note: This patch adds the kasan.mode kernel parameter and the sync/async kernel command line options to enable the described features. Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> --- Documentation/dev-tools/kasan.rst | 9 +++++++++ lib/test_kasan.c | 2 +- mm/kasan/hw_tags.c | 32 ++++++++++++++++++++++++++++++- mm/kasan/kasan.h | 6 ++++-- 4 files changed, 45 insertions(+), 4 deletions(-) diff --git a/Documentation/dev-tools/kasan.rst b/Documentation/dev-tools/kasan.rst index e022b7506e37..e3dca4d1f2a7 100644 --- a/Documentation/dev-tools/kasan.rst +++ b/Documentation/dev-tools/kasan.rst @@ -161,6 +161,15 @@ particular KASAN features. - ``kasan=off`` or ``=on`` controls whether KASAN is enabled (default: ``on``). +- ``kasan.mode=sync`` or ``=async`` controls whether KASAN is configured in + synchronous or asynchronous mode of execution (default: ``sync``). + Synchronous mode: a bad access is detected immediately when a tag + check fault occurs. + Asynchronous mode: a bad access detection is delayed. When a tag check + fault occurs, the information is stored in hardware (in the TFSR_EL1 + register for arm64). The kernel periodically checks the hardware and + only reports tag faults during these checks. + - ``kasan.stacktrace=off`` or ``=on`` disables or enables alloc and free stack traces collection (default: ``on`` for ``CONFIG_DEBUG_KERNEL=y``, otherwise ``off``). diff --git a/lib/test_kasan.c b/lib/test_kasan.c index d16ec9e66806..7285dcf9fcc1 100644 --- a/lib/test_kasan.c +++ b/lib/test_kasan.c @@ -97,7 +97,7 @@ static void kasan_test_exit(struct kunit *test) READ_ONCE(fail_data.report_found)); \ if (IS_ENABLED(CONFIG_KASAN_HW_TAGS)) { \ if (READ_ONCE(fail_data.report_found)) \ - hw_enable_tagging(); \ + hw_enable_tagging_sync(); \ migrate_enable(); \ } \ } while (0) diff --git a/mm/kasan/hw_tags.c b/mm/kasan/hw_tags.c index e529428e7a11..308a879a3798 100644 --- a/mm/kasan/hw_tags.c +++ b/mm/kasan/hw_tags.c @@ -25,6 +25,12 @@ enum kasan_arg { KASAN_ARG_ON, }; +enum kasan_arg_mode { + KASAN_ARG_MODE_DEFAULT, + KASAN_ARG_MODE_SYNC, + KASAN_ARG_MODE_ASYNC, +}; + enum kasan_arg_stacktrace { KASAN_ARG_STACKTRACE_DEFAULT, KASAN_ARG_STACKTRACE_OFF, @@ -38,6 +44,7 @@ enum kasan_arg_fault { }; static enum kasan_arg kasan_arg __ro_after_init; +static enum kasan_arg_mode kasan_arg_mode __ro_after_init; static enum kasan_arg_stacktrace kasan_arg_stacktrace __ro_after_init; static enum kasan_arg_fault kasan_arg_fault __ro_after_init; @@ -68,6 +75,21 @@ static int __init early_kasan_flag(char *arg) } early_param("kasan", early_kasan_flag); +/* kasan.mode=sync/async */ +static int __init early_kasan_mode(char *arg) +{ + /* If arg is not set the default mode is sync */ + if ((!arg) || !strcmp(arg, "sync")) + kasan_arg_mode = KASAN_ARG_MODE_SYNC; + else if (!strcmp(arg, "async")) + kasan_arg_mode = KASAN_ARG_MODE_ASYNC; + else + return -EINVAL; + + return 0; +} +early_param("kasan.mode", early_kasan_mode); + /* kasan.stacktrace=off/on */ static int __init early_kasan_flag_stacktrace(char *arg) { @@ -115,7 +137,15 @@ void kasan_init_hw_tags_cpu(void) return; hw_init_tags(KASAN_TAG_MAX); - hw_enable_tagging(); + + /* + * Enable async mode only when explicitly requested through + * the command line. + */ + if (kasan_arg_mode == KASAN_ARG_MODE_ASYNC) + hw_enable_tagging_async(); + else + hw_enable_tagging_sync(); } /* kasan_init_hw_tags() is called once on boot CPU. */ diff --git a/mm/kasan/kasan.h b/mm/kasan/kasan.h index 07ef7fc742ad..3923d9744105 100644 --- a/mm/kasan/kasan.h +++ b/mm/kasan/kasan.h @@ -294,7 +294,8 @@ static inline const void *arch_kasan_set_tag(const void *addr, u8 tag) #define arch_set_mem_tag_range(addr, size, tag) ((void *)(addr)) #endif -#define hw_enable_tagging() arch_enable_tagging() +#define hw_enable_tagging_sync() arch_enable_tagging_sync() +#define hw_enable_tagging_async() arch_enable_tagging_async() #define hw_init_tags(max_tag) arch_init_tags(max_tag) #define hw_set_tagging_report_once(state) arch_set_tagging_report_once(state) #define hw_get_random_tag() arch_get_random_tag() @@ -303,7 +304,8 @@ static inline const void *arch_kasan_set_tag(const void *addr, u8 tag) #else /* CONFIG_KASAN_HW_TAGS */ -#define hw_enable_tagging() +#define hw_enable_tagging_sync() +#define hw_enable_tagging_async() #define hw_set_tagging_report_once(state) #endif /* CONFIG_KASAN_HW_TAGS */ -- 2.30.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-01-22 14:01 UTC|newest] Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-01-22 13:59 [PATCH v6 0/4] arm64: ARMv8.5-A: MTE: Add async mode support Vincenzo Frascino 2021-01-22 13:59 ` Vincenzo Frascino 2021-01-22 13:59 ` [PATCH v6 1/4] arm64: mte: Add asynchronous " Vincenzo Frascino 2021-01-22 13:59 ` Vincenzo Frascino 2021-01-22 13:59 ` Vincenzo Frascino [this message] 2021-01-22 13:59 ` [PATCH v6 2/4] kasan: Add KASAN mode kernel parameter Vincenzo Frascino 2021-01-22 13:59 ` [PATCH v6 3/4] kasan: Add report for async mode Vincenzo Frascino 2021-01-22 13:59 ` Vincenzo Frascino 2021-01-22 13:59 ` [PATCH v6 4/4] arm64: mte: Enable async tag check fault Vincenzo Frascino 2021-01-22 13:59 ` Vincenzo Frascino 2021-01-22 14:09 ` [PATCH v6 0/4] arm64: ARMv8.5-A: MTE: Add async mode support Vincenzo Frascino 2021-01-22 14:09 ` Vincenzo Frascino
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210122135955.30237-3-vincenzo.frascino@arm.com \ --to=vincenzo.frascino@arm.com \ --cc=Branislav.Rankov@arm.com \ --cc=andreyknvl@google.com \ --cc=aryabinin@virtuozzo.com \ --cc=catalin.marinas@arm.com \ --cc=dvyukov@google.com \ --cc=elver@google.com \ --cc=eugenis@google.com \ --cc=glider@google.com \ --cc=kasan-dev@googlegroups.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=will@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.