From: Aswath Govindraju <a-govindraju@ti.com>
To: unlisted-recipients:; (no To-header on input)
Cc: Lokesh Vutla <lokeshvutla@ti.com>,
Vignesh Raghavendra <vigneshr@ti.com>,
Kishon Vijay Abraham I <kishon@ti.com>,
Aswath Govindraju <a-govindraju@ti.com>,
Nishanth Menon <nm@ti.com>, Tero Kristo <kristo@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH 1/2] arm64: dts: ti: k3-j7200-main: Add support for HS200 and HS400 modes in MMCSD0 subsystem
Date: Fri, 22 Jan 2021 21:54:02 +0530 [thread overview]
Message-ID: <20210122162403.20700-2-a-govindraju@ti.com> (raw)
In-Reply-To: <20210122162403.20700-1-a-govindraju@ti.com>
HS200 and HS400 modes at 1.8 V card voltage, are now supported in MMCSD0
subsystem of J7200 SoC[1].
Set respective tags to indicate it.
[1] - https://www.ti.com/lit/ug/spruiu1a/spruiu1a.pdf
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
---
arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 4cc2e9094d0e..03486395e492 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -517,6 +517,8 @@
ti,trm-icp = <0x8>;
bus-width = <8>;
mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
dma-coherent;
};
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Aswath Govindraju <a-govindraju@ti.com>
Cc: Nishanth Menon <nm@ti.com>,
devicetree@vger.kernel.org, Vignesh Raghavendra <vigneshr@ti.com>,
Tero Kristo <kristo@kernel.org>,
Lokesh Vutla <lokeshvutla@ti.com>,
linux-kernel@vger.kernel.org,
Kishon Vijay Abraham I <kishon@ti.com>,
Rob Herring <robh+dt@kernel.org>,
Aswath Govindraju <a-govindraju@ti.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] arm64: dts: ti: k3-j7200-main: Add support for HS200 and HS400 modes in MMCSD0 subsystem
Date: Fri, 22 Jan 2021 21:54:02 +0530 [thread overview]
Message-ID: <20210122162403.20700-2-a-govindraju@ti.com> (raw)
In-Reply-To: <20210122162403.20700-1-a-govindraju@ti.com>
HS200 and HS400 modes at 1.8 V card voltage, are now supported in MMCSD0
subsystem of J7200 SoC[1].
Set respective tags to indicate it.
[1] - https://www.ti.com/lit/ug/spruiu1a/spruiu1a.pdf
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
---
arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 4cc2e9094d0e..03486395e492 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -517,6 +517,8 @@
ti,trm-icp = <0x8>;
bus-width = <8>;
mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
dma-coherent;
};
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-01-22 16:28 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-22 16:24 [PATCH 0/2] mmc: J7200: Add support for higher speed modes in MMCSD subsystems Aswath Govindraju
2021-01-22 16:24 ` Aswath Govindraju
2021-01-22 16:24 ` Aswath Govindraju [this message]
2021-01-22 16:24 ` [PATCH 1/2] arm64: dts: ti: k3-j7200-main: Add support for HS200 and HS400 modes in MMCSD0 subsystem Aswath Govindraju
2021-01-22 16:24 ` [PATCH 2/2] arm64: dts: ti: k3-j7200-main: Add support for UHS-I modes in MMCSD1 subsystem Aswath Govindraju
2021-01-22 16:24 ` Aswath Govindraju
2021-01-22 18:06 ` [PATCH 0/2] mmc: J7200: Add support for higher speed modes in MMCSD subsystems Nishanth Menon
2021-01-22 18:06 ` Nishanth Menon
2021-01-25 13:42 ` Aswath Govindraju
2021-01-25 13:42 ` Aswath Govindraju
2021-01-25 13:51 ` Nishanth Menon
2021-01-25 13:51 ` Nishanth Menon
2021-01-25 14:13 ` Aswath Govindraju
2021-01-25 14:13 ` Aswath Govindraju
2021-01-25 14:18 ` Nishanth Menon
2021-01-25 14:18 ` Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210122162403.20700-2-a-govindraju@ti.com \
--to=a-govindraju@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=kishon@ti.com \
--cc=kristo@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lokeshvutla@ti.com \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.