From: Christian Hewitt <christianshewitt@gmail.com>
To: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Kevin Hilman <khilman@baylibre.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: Christian Hewitt <christianshewitt@gmail.com>,
Dongjin Kim <tobetter@gmail.com>
Subject: [PATCH 5/5] arm64: dts: meson: add initial device-tree for ODROID-HC4
Date: Fri, 29 Jan 2021 06:51:37 +0000 [thread overview]
Message-ID: <20210129065137.5473-6-christianshewitt@gmail.com> (raw)
In-Reply-To: <20210129065137.5473-1-christianshewitt@gmail.com>
ODROID-HC4 is a derivative of the C4 with minor differences:
- 128MB SPI-NOR flash
- 2x SATA ports via ASM1061 PCIe to SATA controller
- 7-pin header with SPI and I2C for 1-inch OLED display and RTC
- 1x USB 2.0 host port
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../boot/dts/amlogic/meson-sm1-odroid-hc4.dts | 96 +++++++++++++++++++
2 files changed, 97 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index f3c8a85fe987..78a569d7fa20 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -47,5 +47,6 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-wetek-core2.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
new file mode 100644
index 000000000000..bf15700c4b15
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Dongjin Kim <tobetter@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1-odroid.dtsi"
+
+/ {
+ compatible = "hardkernel,odroid-hc4", "amlogic,sm1";
+ model = "Hardkernel ODROID-HC4";
+
+ aliases {
+ rtc0 = &rtc;
+ rtc1 = &vrtc;
+ };
+
+ fan0: pwm-fan {
+ compatible = "pwm-fan";
+ #cooling-cells = <2>;
+ cooling-min-state = <0>;
+ cooling-max-state = <3>;
+ cooling-levels = <0 120 170 220>;
+ pwms = <&pwm_cd 1 40000 0>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-blue {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ panic-indicator;
+ };
+
+ led-red {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_POWER;
+ gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+
+ sound {
+ model = "ODROID-HC4";
+ };
+};
+
+&cpu_thermal {
+ cooling-maps {
+ map {
+ trip = <&cpu_passive>;
+ cooling-device = <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+};
+
+&ir {
+ linux,rc-map-name = "rc-odroid";
+};
+
+&i2c2 {
+ status = "okay";
+ pinctrl-0 = <&i2c2_sda_x_pins>, <&i2c2_sck_x_pins>;
+ pinctrl-names = "default";
+
+ rtc: rtc@51 {
+ status = "okay";
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ wakeup-source;
+ };
+};
+
+&pcie {
+ status = "okay";
+ reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+};
+
+&pwm_cd {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_d_x6_pins>;
+};
+
+&sd_emmc_c {
+ status = "disabled";
+};
+
+&usb {
+ phys = <&usb2_phy0>, <&usb2_phy1>;
+ phy-names = "usb2-phy0", "usb2-phy1";
+};
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Christian Hewitt <christianshewitt@gmail.com>
To: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Kevin Hilman <khilman@baylibre.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: Dongjin Kim <tobetter@gmail.com>,
Christian Hewitt <christianshewitt@gmail.com>
Subject: [PATCH 5/5] arm64: dts: meson: add initial device-tree for ODROID-HC4
Date: Fri, 29 Jan 2021 06:51:37 +0000 [thread overview]
Message-ID: <20210129065137.5473-6-christianshewitt@gmail.com> (raw)
In-Reply-To: <20210129065137.5473-1-christianshewitt@gmail.com>
ODROID-HC4 is a derivative of the C4 with minor differences:
- 128MB SPI-NOR flash
- 2x SATA ports via ASM1061 PCIe to SATA controller
- 7-pin header with SPI and I2C for 1-inch OLED display and RTC
- 1x USB 2.0 host port
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../boot/dts/amlogic/meson-sm1-odroid-hc4.dts | 96 +++++++++++++++++++
2 files changed, 97 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index f3c8a85fe987..78a569d7fa20 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -47,5 +47,6 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-wetek-core2.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
new file mode 100644
index 000000000000..bf15700c4b15
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Dongjin Kim <tobetter@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1-odroid.dtsi"
+
+/ {
+ compatible = "hardkernel,odroid-hc4", "amlogic,sm1";
+ model = "Hardkernel ODROID-HC4";
+
+ aliases {
+ rtc0 = &rtc;
+ rtc1 = &vrtc;
+ };
+
+ fan0: pwm-fan {
+ compatible = "pwm-fan";
+ #cooling-cells = <2>;
+ cooling-min-state = <0>;
+ cooling-max-state = <3>;
+ cooling-levels = <0 120 170 220>;
+ pwms = <&pwm_cd 1 40000 0>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-blue {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ panic-indicator;
+ };
+
+ led-red {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_POWER;
+ gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+
+ sound {
+ model = "ODROID-HC4";
+ };
+};
+
+&cpu_thermal {
+ cooling-maps {
+ map {
+ trip = <&cpu_passive>;
+ cooling-device = <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+};
+
+&ir {
+ linux,rc-map-name = "rc-odroid";
+};
+
+&i2c2 {
+ status = "okay";
+ pinctrl-0 = <&i2c2_sda_x_pins>, <&i2c2_sck_x_pins>;
+ pinctrl-names = "default";
+
+ rtc: rtc@51 {
+ status = "okay";
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ wakeup-source;
+ };
+};
+
+&pcie {
+ status = "okay";
+ reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+};
+
+&pwm_cd {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_d_x6_pins>;
+};
+
+&sd_emmc_c {
+ status = "disabled";
+};
+
+&usb {
+ phys = <&usb2_phy0>, <&usb2_phy1>;
+ phy-names = "usb2-phy0", "usb2-phy1";
+};
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Christian Hewitt <christianshewitt@gmail.com>
To: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Kevin Hilman <khilman@baylibre.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: Dongjin Kim <tobetter@gmail.com>,
Christian Hewitt <christianshewitt@gmail.com>
Subject: [PATCH 5/5] arm64: dts: meson: add initial device-tree for ODROID-HC4
Date: Fri, 29 Jan 2021 06:51:37 +0000 [thread overview]
Message-ID: <20210129065137.5473-6-christianshewitt@gmail.com> (raw)
In-Reply-To: <20210129065137.5473-1-christianshewitt@gmail.com>
ODROID-HC4 is a derivative of the C4 with minor differences:
- 128MB SPI-NOR flash
- 2x SATA ports via ASM1061 PCIe to SATA controller
- 7-pin header with SPI and I2C for 1-inch OLED display and RTC
- 1x USB 2.0 host port
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../boot/dts/amlogic/meson-sm1-odroid-hc4.dts | 96 +++++++++++++++++++
2 files changed, 97 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index f3c8a85fe987..78a569d7fa20 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -47,5 +47,6 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-wetek-core2.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
new file mode 100644
index 000000000000..bf15700c4b15
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Dongjin Kim <tobetter@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1-odroid.dtsi"
+
+/ {
+ compatible = "hardkernel,odroid-hc4", "amlogic,sm1";
+ model = "Hardkernel ODROID-HC4";
+
+ aliases {
+ rtc0 = &rtc;
+ rtc1 = &vrtc;
+ };
+
+ fan0: pwm-fan {
+ compatible = "pwm-fan";
+ #cooling-cells = <2>;
+ cooling-min-state = <0>;
+ cooling-max-state = <3>;
+ cooling-levels = <0 120 170 220>;
+ pwms = <&pwm_cd 1 40000 0>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-blue {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ panic-indicator;
+ };
+
+ led-red {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_POWER;
+ gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+
+ sound {
+ model = "ODROID-HC4";
+ };
+};
+
+&cpu_thermal {
+ cooling-maps {
+ map {
+ trip = <&cpu_passive>;
+ cooling-device = <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+};
+
+&ir {
+ linux,rc-map-name = "rc-odroid";
+};
+
+&i2c2 {
+ status = "okay";
+ pinctrl-0 = <&i2c2_sda_x_pins>, <&i2c2_sck_x_pins>;
+ pinctrl-names = "default";
+
+ rtc: rtc@51 {
+ status = "okay";
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ wakeup-source;
+ };
+};
+
+&pcie {
+ status = "okay";
+ reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+};
+
+&pwm_cd {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm_d_x6_pins>;
+};
+
+&sd_emmc_c {
+ status = "disabled";
+};
+
+&usb {
+ phys = <&usb2_phy0>, <&usb2_phy1>;
+ phy-names = "usb2-phy0", "usb2-phy1";
+};
--
2.17.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2021-01-29 6:53 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-29 6:51 [PATCH 0/5] arm64: dts: meson: add support for ODROID-HC4 Christian Hewitt
2021-01-29 6:51 ` Christian Hewitt
2021-01-29 6:51 ` Christian Hewitt
2021-01-29 6:51 ` [PATCH 1/5] dt-bindings: arm: amlogic: sort SM1 bindings Christian Hewitt
2021-01-29 6:51 ` Christian Hewitt
2021-01-29 6:51 ` Christian Hewitt
2021-01-29 8:09 ` Neil Armstrong
2021-01-29 8:09 ` Neil Armstrong
2021-01-29 6:51 ` [PATCH 2/5] arm64: dts: meson: sort Amlogic dtb Makefile Christian Hewitt
2021-01-29 6:51 ` Christian Hewitt
2021-01-29 6:51 ` Christian Hewitt
2021-01-29 8:10 ` Neil Armstrong
2021-01-29 8:10 ` Neil Armstrong
2021-01-29 6:51 ` [PATCH 3/5] arm64: dts: meson: convert meson-sm1-odroid-c4 to dtsi Christian Hewitt
2021-01-29 6:51 ` Christian Hewitt
2021-01-29 6:51 ` Christian Hewitt
2021-01-29 8:11 ` Neil Armstrong
2021-01-29 8:11 ` Neil Armstrong
2021-01-29 6:51 ` [PATCH 4/5] dt-bindings: arm: amlogic: add ODROID-HC4 bindings Christian Hewitt
2021-01-29 6:51 ` Christian Hewitt
2021-01-29 6:51 ` Christian Hewitt
2021-01-29 6:51 ` Christian Hewitt [this message]
2021-01-29 6:51 ` [PATCH 5/5] arm64: dts: meson: add initial device-tree for ODROID-HC4 Christian Hewitt
2021-01-29 6:51 ` Christian Hewitt
2021-01-29 7:02 ` Christian Hewitt
2021-01-29 7:02 ` Christian Hewitt
2021-01-29 7:02 ` Christian Hewitt
2021-01-29 8:12 ` Neil Armstrong
2021-01-29 8:12 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210129065137.5473-6-christianshewitt@gmail.com \
--to=christianshewitt@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=tobetter@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.