[PATCH] spi: fsl: invert spisel_boot signal on MPC8309

From: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
To: Mark Brown <broonie@kernel.org>,
	Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk>,
	stable@vger.kernel.org, linux-spi@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH] spi: fsl: invert spisel_boot signal on MPC8309
Date: Sat, 30 Jan 2021 15:35:45 +0100	[thread overview]
Message-ID: <20210130143545.505613-1-rasmus.villemoes@prevas.dk> (raw)

Commit 7a2da5d7960a ("spi: fsl: Fix driver breakage when SPI_CS_HIGH
is not set in spi->mode") broke our MPC8309 board by effectively
inverting the boolean value passed to fsl_spi_cs_control. The
SPISEL_BOOT signal is used as chipselect, but it's not a gpio, so
we cannot rely on gpiolib handling the polarity.

Adapt to the new world order by inverting the logic here. This does
assume that the slave sitting at the SPISEL_BOOT is active low, but
should that ever turn out not to be the case, one can create a stub
gpiochip driver controlling a single gpio (or rather, a single "spo",
special-purpose output).

Fixes: 7a2da5d7960a ("spi: fsl: Fix driver breakage when SPI_CS_HIGH is not set in spi->mode")
Cc: stable@vger.kernel.org
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
---
 drivers/spi/spi-fsl-spi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c
index 6d8e0a05a535..e4a8d203f940 100644
--- a/drivers/spi/spi-fsl-spi.c
+++ b/drivers/spi/spi-fsl-spi.c
@@ -695,7 +695,7 @@ static void fsl_spi_cs_control(struct spi_device *spi, bool on)
 
 		if (WARN_ON_ONCE(!pinfo->immr_spi_cs))
 			return;
-		iowrite32be(on ? SPI_BOOT_SEL_BIT : 0, pinfo->immr_spi_cs);
+		iowrite32be(on ? 0 : SPI_BOOT_SEL_BIT, pinfo->immr_spi_cs);
 	}
 }
 
-- 
2.23.0

