From: Anand K Mistry <amistry@google.com> To: ath10k@lists.infradead.org Cc: Anand K Mistry <amistry@google.com>, "David S. Miller" <davem@davemloft.net>, Jakub Kicinski <kuba@kernel.org>, Kalle Valo <kvalo@codeaurora.org>, Wen Gong <wgong@codeaurora.org>, linux-kernel@vger.kernel.org, linux-wireless@vger.kernel.org, netdev@vger.kernel.org Subject: [PATCH] ath10k: Fix suspicious RCU usage warning in ath10k_wmi_tlv_parse_peer_stats_info() Date: Tue, 2 Feb 2021 13:45:09 +1100 [thread overview] Message-ID: <20210202134451.1.I0d2e83c42755671b7143504b62787fd06cd914ed@changeid> (raw) The ieee80211_find_sta_by_ifaddr call in ath10k_wmi_tlv_parse_peer_stats_info must be called while holding the RCU read lock. Otherwise, the following warning will be seen when RCU usage checking is enabled: ============================= WARNING: suspicious RCU usage 5.10.3 #8 Tainted: G W ----------------------------- include/linux/rhashtable.h:594 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 no locks held by ksoftirqd/1/16. stack backtrace: CPU: 1 PID: 16 Comm: ksoftirqd/1 Tainted: G W 5.10.3 #8 Hardware name: HP Grunt/Grunt, BIOS Google_Grunt.11031.104.0 09/05/2019 Call Trace: dump_stack+0xab/0x115 sta_info_hash_lookup+0x71/0x1e9 [mac80211] ? lock_is_held_type+0xe6/0x12f ? __kasan_kmalloc+0xfb/0x112 ieee80211_find_sta_by_ifaddr+0x12/0x61 [mac80211] ath10k_wmi_tlv_parse_peer_stats_info+0xbd/0x10b [ath10k_core] ath10k_wmi_tlv_iter+0x8b/0x1a1 [ath10k_core] ? ath10k_wmi_tlv_iter+0x1a1/0x1a1 [ath10k_core] ath10k_wmi_tlv_event_peer_stats_info+0x103/0x13b [ath10k_core] ath10k_wmi_tlv_op_rx+0x722/0x80d [ath10k_core] ath10k_htc_rx_completion_handler+0x16e/0x1d7 [ath10k_core] ath10k_pci_process_rx_cb+0x116/0x22c [ath10k_pci] ? ath10k_htc_process_trailer+0x332/0x332 [ath10k_core] ? _raw_spin_unlock_irqrestore+0x34/0x61 ? lockdep_hardirqs_on+0x8e/0x12e ath10k_ce_per_engine_service+0x55/0x74 [ath10k_core] ath10k_ce_per_engine_service_any+0x76/0x84 [ath10k_core] ath10k_pci_napi_poll+0x49/0x141 [ath10k_pci] net_rx_action+0x11a/0x347 __do_softirq+0x2d3/0x539 run_ksoftirqd+0x4b/0x86 smpboot_thread_fn+0x1d0/0x2ab ? cpu_report_death+0x7f/0x7f kthread+0x189/0x191 ? cpu_report_death+0x7f/0x7f ? kthread_blkcg+0x31/0x31 ret_from_fork+0x22/0x30 Fixes: 0f7cb26830a6e ("ath10k: add rx bitrate report for SDIO") Signed-off-by: Anand K Mistry <amistry@google.com> --- drivers/net/wireless/ath/ath10k/wmi-tlv.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c index 7b5834157fe5..e6135795719a 100644 --- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c +++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c @@ -240,8 +240,10 @@ static int ath10k_wmi_tlv_parse_peer_stats_info(struct ath10k *ar, u16 tag, u16 __le32_to_cpu(stat->last_tx_rate_code), __le32_to_cpu(stat->last_tx_bitrate_kbps)); + rcu_read_lock(); sta = ieee80211_find_sta_by_ifaddr(ar->hw, stat->peer_macaddr.addr, NULL); if (!sta) { + rcu_read_unlock(); ath10k_warn(ar, "not found station for peer stats\n"); return -EINVAL; } @@ -251,6 +253,7 @@ static int ath10k_wmi_tlv_parse_peer_stats_info(struct ath10k *ar, u16 tag, u16 arsta->rx_bitrate_kbps = __le32_to_cpu(stat->last_rx_bitrate_kbps); arsta->tx_rate_code = __le32_to_cpu(stat->last_tx_rate_code); arsta->tx_bitrate_kbps = __le32_to_cpu(stat->last_tx_bitrate_kbps); + rcu_read_unlock(); return 0; } -- 2.30.0.365.g02bc693789-goog
WARNING: multiple messages have this Message-ID (diff)
From: Anand K Mistry <amistry@google.com> To: ath10k@lists.infradead.org Cc: Anand K Mistry <amistry@google.com>, netdev@vger.kernel.org, linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org, Wen Gong <wgong@codeaurora.org>, Jakub Kicinski <kuba@kernel.org>, "David S. Miller" <davem@davemloft.net>, Kalle Valo <kvalo@codeaurora.org> Subject: [PATCH] ath10k: Fix suspicious RCU usage warning in ath10k_wmi_tlv_parse_peer_stats_info() Date: Tue, 2 Feb 2021 13:45:09 +1100 [thread overview] Message-ID: <20210202134451.1.I0d2e83c42755671b7143504b62787fd06cd914ed@changeid> (raw) The ieee80211_find_sta_by_ifaddr call in ath10k_wmi_tlv_parse_peer_stats_info must be called while holding the RCU read lock. Otherwise, the following warning will be seen when RCU usage checking is enabled: ============================= WARNING: suspicious RCU usage 5.10.3 #8 Tainted: G W ----------------------------- include/linux/rhashtable.h:594 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 no locks held by ksoftirqd/1/16. stack backtrace: CPU: 1 PID: 16 Comm: ksoftirqd/1 Tainted: G W 5.10.3 #8 Hardware name: HP Grunt/Grunt, BIOS Google_Grunt.11031.104.0 09/05/2019 Call Trace: dump_stack+0xab/0x115 sta_info_hash_lookup+0x71/0x1e9 [mac80211] ? lock_is_held_type+0xe6/0x12f ? __kasan_kmalloc+0xfb/0x112 ieee80211_find_sta_by_ifaddr+0x12/0x61 [mac80211] ath10k_wmi_tlv_parse_peer_stats_info+0xbd/0x10b [ath10k_core] ath10k_wmi_tlv_iter+0x8b/0x1a1 [ath10k_core] ? ath10k_wmi_tlv_iter+0x1a1/0x1a1 [ath10k_core] ath10k_wmi_tlv_event_peer_stats_info+0x103/0x13b [ath10k_core] ath10k_wmi_tlv_op_rx+0x722/0x80d [ath10k_core] ath10k_htc_rx_completion_handler+0x16e/0x1d7 [ath10k_core] ath10k_pci_process_rx_cb+0x116/0x22c [ath10k_pci] ? ath10k_htc_process_trailer+0x332/0x332 [ath10k_core] ? _raw_spin_unlock_irqrestore+0x34/0x61 ? lockdep_hardirqs_on+0x8e/0x12e ath10k_ce_per_engine_service+0x55/0x74 [ath10k_core] ath10k_ce_per_engine_service_any+0x76/0x84 [ath10k_core] ath10k_pci_napi_poll+0x49/0x141 [ath10k_pci] net_rx_action+0x11a/0x347 __do_softirq+0x2d3/0x539 run_ksoftirqd+0x4b/0x86 smpboot_thread_fn+0x1d0/0x2ab ? cpu_report_death+0x7f/0x7f kthread+0x189/0x191 ? cpu_report_death+0x7f/0x7f ? kthread_blkcg+0x31/0x31 ret_from_fork+0x22/0x30 Fixes: 0f7cb26830a6e ("ath10k: add rx bitrate report for SDIO") Signed-off-by: Anand K Mistry <amistry@google.com> --- drivers/net/wireless/ath/ath10k/wmi-tlv.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c index 7b5834157fe5..e6135795719a 100644 --- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c +++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c @@ -240,8 +240,10 @@ static int ath10k_wmi_tlv_parse_peer_stats_info(struct ath10k *ar, u16 tag, u16 __le32_to_cpu(stat->last_tx_rate_code), __le32_to_cpu(stat->last_tx_bitrate_kbps)); + rcu_read_lock(); sta = ieee80211_find_sta_by_ifaddr(ar->hw, stat->peer_macaddr.addr, NULL); if (!sta) { + rcu_read_unlock(); ath10k_warn(ar, "not found station for peer stats\n"); return -EINVAL; } @@ -251,6 +253,7 @@ static int ath10k_wmi_tlv_parse_peer_stats_info(struct ath10k *ar, u16 tag, u16 arsta->rx_bitrate_kbps = __le32_to_cpu(stat->last_rx_bitrate_kbps); arsta->tx_rate_code = __le32_to_cpu(stat->last_tx_rate_code); arsta->tx_bitrate_kbps = __le32_to_cpu(stat->last_tx_bitrate_kbps); + rcu_read_unlock(); return 0; } -- 2.30.0.365.g02bc693789-goog _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k
next reply other threads:[~2021-02-02 2:46 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-02-02 2:45 Anand K Mistry [this message] 2021-02-02 2:45 ` [PATCH] ath10k: Fix suspicious RCU usage warning in ath10k_wmi_tlv_parse_peer_stats_info() Anand K Mistry 2021-02-09 7:17 ` Kalle Valo 2021-02-09 7:17 ` Kalle Valo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210202134451.1.I0d2e83c42755671b7143504b62787fd06cd914ed@changeid \ --to=amistry@google.com \ --cc=ath10k@lists.infradead.org \ --cc=davem@davemloft.net \ --cc=kuba@kernel.org \ --cc=kvalo@codeaurora.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-wireless@vger.kernel.org \ --cc=netdev@vger.kernel.org \ --cc=wgong@codeaurora.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.