All of lore.kernel.org
 help / color / mirror / Atom feed
From: Wei Liu <wei.liu@kernel.org>
To: Linux on Hyper-V List <linux-hyperv@vger.kernel.org>
Cc: virtualization@lists.linux-foundation.org,
	Linux Kernel List <linux-kernel@vger.kernel.org>,
	Michael Kelley <mikelley@microsoft.com>,
	Vineeth Pillai <viremana@linux.microsoft.com>,
	Sunil Muthuswamy <sunilmut@microsoft.com>,
	Nuno Das Neves <nunodasneves@linux.microsoft.com>,
	pasha.tatashin@soleen.com, Wei Liu <wei.liu@kernel.org>,
	Lillian Grassin-Drake <ligrassi@microsoft.com>,
	"K. Y. Srinivasan" <kys@microsoft.com>,
	Haiyang Zhang <haiyangz@microsoft.com>,
	Stephen Hemminger <sthemmin@microsoft.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Ingo Molnar <mingo@redhat.com>, Borislav Petkov <bp@alien8.de>,
	x86@kernel.org (maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)),
	"H. Peter Anvin" <hpa@zytor.com>, Arnd Bergmann <arnd@arndb.de>,
	linux-arch@vger.kernel.org (open list:GENERIC INCLUDE/ASM HEADER
	FILES)
Subject: [PATCH v6 09/16] x86/hyperv: provide a bunch of helper functions
Date: Wed,  3 Feb 2021 15:04:28 +0000	[thread overview]
Message-ID: <20210203150435.27941-10-wei.liu@kernel.org> (raw)
In-Reply-To: <20210203150435.27941-1-wei.liu@kernel.org>

They are used to deposit pages into Microsoft Hypervisor and bring up
logical and virtual processors.

Signed-off-by: Lillian Grassin-Drake <ligrassi@microsoft.com>
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Co-Developed-by: Lillian Grassin-Drake <ligrassi@microsoft.com>
Co-Developed-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Co-Developed-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
---
v6:
1. Address Michael's comments.

v4: Fix compilation issue when CONFIG_ACPI_NUMA is not set.

v3:
1. Add __packed to structures.
2. Drop unnecessary exports.

v2:
1. Adapt to hypervisor side changes
2. Address Vitaly's comments

use u64 status

pages

major comments

minor comments

rely on acpi code
---
 arch/x86/hyperv/Makefile          |   2 +-
 arch/x86/hyperv/hv_proc.c         | 219 ++++++++++++++++++++++++++++++
 arch/x86/include/asm/mshyperv.h   |   4 +
 include/asm-generic/hyperv-tlfs.h |  67 +++++++++
 4 files changed, 291 insertions(+), 1 deletion(-)
 create mode 100644 arch/x86/hyperv/hv_proc.c

diff --git a/arch/x86/hyperv/Makefile b/arch/x86/hyperv/Makefile
index 89b1f74d3225..565358020921 100644
--- a/arch/x86/hyperv/Makefile
+++ b/arch/x86/hyperv/Makefile
@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0-only
 obj-y			:= hv_init.o mmu.o nested.o
-obj-$(CONFIG_X86_64)	+= hv_apic.o
+obj-$(CONFIG_X86_64)	+= hv_apic.o hv_proc.o
 
 ifdef CONFIG_X86_64
 obj-$(CONFIG_PARAVIRT_SPINLOCKS)	+= hv_spinlock.o
diff --git a/arch/x86/hyperv/hv_proc.c b/arch/x86/hyperv/hv_proc.c
new file mode 100644
index 000000000000..60461e598239
--- /dev/null
+++ b/arch/x86/hyperv/hv_proc.c
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/types.h>
+#include <linux/version.h>
+#include <linux/vmalloc.h>
+#include <linux/mm.h>
+#include <linux/clockchips.h>
+#include <linux/acpi.h>
+#include <linux/hyperv.h>
+#include <linux/slab.h>
+#include <linux/cpuhotplug.h>
+#include <linux/minmax.h>
+#include <asm/hypervisor.h>
+#include <asm/mshyperv.h>
+#include <asm/apic.h>
+
+#include <asm/trace/hyperv.h>
+
+/*
+ * See struct hv_deposit_memory. The first u64 is partition ID, the rest
+ * are GPAs.
+ */
+#define HV_DEPOSIT_MAX (HV_HYP_PAGE_SIZE / sizeof(u64) - 1)
+
+/* Deposits exact number of pages. Must be called with interrupts enabled.  */
+int hv_call_deposit_pages(int node, u64 partition_id, u32 num_pages)
+{
+	struct page **pages, *page;
+	int *counts;
+	int num_allocations;
+	int i, j, page_count;
+	int order;
+	u64 status;
+	int ret;
+	u64 base_pfn;
+	struct hv_deposit_memory *input_page;
+	unsigned long flags;
+
+	if (num_pages > HV_DEPOSIT_MAX)
+		return -E2BIG;
+	if (!num_pages)
+		return 0;
+
+	/* One buffer for page pointers and counts */
+	page = alloc_page(GFP_KERNEL);
+	if (!page)
+		return -ENOMEM;
+	pages = page_address(page);
+
+	counts = kcalloc(HV_DEPOSIT_MAX, sizeof(int), GFP_KERNEL);
+	if (!counts) {
+		free_page((unsigned long)pages);
+		return -ENOMEM;
+	}
+
+	/* Allocate all the pages before disabling interrupts */
+	i = 0;
+
+	while (num_pages) {
+		/* Find highest order we can actually allocate */
+		order = 31 - __builtin_clz(num_pages);
+
+		while (1) {
+			pages[i] = alloc_pages_node(node, GFP_KERNEL, order);
+			if (pages[i])
+				break;
+			if (!order) {
+				ret = -ENOMEM;
+				num_allocations = i;
+				goto err_free_allocations;
+			}
+			--order;
+		}
+
+		split_page(pages[i], order);
+		counts[i] = 1 << order;
+		num_pages -= counts[i];
+		i++;
+	}
+	num_allocations = i;
+
+	local_irq_save(flags);
+
+	input_page = *this_cpu_ptr(hyperv_pcpu_input_arg);
+
+	input_page->partition_id = partition_id;
+
+	/* Populate gpa_page_list - these will fit on the input page */
+	for (i = 0, page_count = 0; i < num_allocations; ++i) {
+		base_pfn = page_to_pfn(pages[i]);
+		for (j = 0; j < counts[i]; ++j, ++page_count)
+			input_page->gpa_page_list[page_count] = base_pfn + j;
+	}
+	status = hv_do_rep_hypercall(HVCALL_DEPOSIT_MEMORY,
+				     page_count, 0, input_page, NULL);
+	local_irq_restore(flags);
+
+	if ((status & HV_HYPERCALL_RESULT_MASK) != HV_STATUS_SUCCESS) {
+		pr_err("Failed to deposit pages: %lld\n", status);
+		ret = status;
+		goto err_free_allocations;
+	}
+
+	ret = 0;
+	goto free_buf;
+
+err_free_allocations:
+	for (i = 0; i < num_allocations; ++i) {
+		base_pfn = page_to_pfn(pages[i]);
+		for (j = 0; j < counts[i]; ++j)
+			__free_page(pfn_to_page(base_pfn + j));
+	}
+
+free_buf:
+	free_page((unsigned long)pages);
+	kfree(counts);
+	return ret;
+}
+
+int hv_call_add_logical_proc(int node, u32 lp_index, u32 apic_id)
+{
+	struct hv_add_logical_processor_in *input;
+	struct hv_add_logical_processor_out *output;
+	u64 status;
+	unsigned long flags;
+	int ret = 0;
+	int pxm = node_to_pxm(node);
+
+	/*
+	 * When adding a logical processor, the hypervisor may return
+	 * HV_STATUS_INSUFFICIENT_MEMORY. When that happens, we deposit more
+	 * pages and retry.
+	 */
+	do {
+		local_irq_save(flags);
+
+		input = *this_cpu_ptr(hyperv_pcpu_input_arg);
+		/* We don't do anything with the output right now */
+		output = *this_cpu_ptr(hyperv_pcpu_output_arg);
+
+		input->lp_index = lp_index;
+		input->apic_id = apic_id;
+		input->flags = 0;
+		input->proximity_domain_info.domain_id = pxm;
+		input->proximity_domain_info.flags.reserved = 0;
+		input->proximity_domain_info.flags.proximity_info_valid = 1;
+		input->proximity_domain_info.flags.proximity_preferred = 1;
+		status = hv_do_hypercall(HVCALL_ADD_LOGICAL_PROCESSOR,
+					 input, output);
+		local_irq_restore(flags);
+
+		status &= HV_HYPERCALL_RESULT_MASK;
+
+		if (status != HV_STATUS_INSUFFICIENT_MEMORY) {
+			if (status != HV_STATUS_SUCCESS) {
+				pr_err("%s: cpu %u apic ID %u, %lld\n", __func__,
+				       lp_index, apic_id, status);
+				ret = status;
+			}
+			break;
+		}
+		ret = hv_call_deposit_pages(node, hv_current_partition_id, 1);
+	} while (!ret);
+
+	return ret;
+}
+
+int hv_call_create_vp(int node, u64 partition_id, u32 vp_index, u32 flags)
+{
+	struct hv_create_vp *input;
+	u64 status;
+	unsigned long irq_flags;
+	int ret = 0;
+	int pxm = node_to_pxm(node);
+
+	/* Root VPs don't seem to need pages deposited */
+	if (partition_id != hv_current_partition_id) {
+		/* The value 90 is empirically determined. It may change. */
+		ret = hv_call_deposit_pages(node, partition_id, 90);
+		if (ret)
+			return ret;
+	}
+
+	do {
+		local_irq_save(irq_flags);
+
+		input = *this_cpu_ptr(hyperv_pcpu_input_arg);
+
+		input->partition_id = partition_id;
+		input->vp_index = vp_index;
+		input->flags = flags;
+		input->subnode_type = HvSubnodeAny;
+		if (node != NUMA_NO_NODE) {
+			input->proximity_domain_info.domain_id = pxm;
+			input->proximity_domain_info.flags.reserved = 0;
+			input->proximity_domain_info.flags.proximity_info_valid = 1;
+			input->proximity_domain_info.flags.proximity_preferred = 1;
+		} else {
+			input->proximity_domain_info.as_uint64 = 0;
+		}
+		status = hv_do_hypercall(HVCALL_CREATE_VP, input, NULL);
+		local_irq_restore(irq_flags);
+
+		status &= HV_HYPERCALL_RESULT_MASK;
+
+		if (status != HV_STATUS_INSUFFICIENT_MEMORY) {
+			if (status != HV_STATUS_SUCCESS) {
+				pr_err("%s: vcpu %u, lp %u, %lld\n", __func__,
+				       vp_index, flags, status);
+				ret = status;
+			}
+			break;
+		}
+		ret = hv_call_deposit_pages(node, partition_id, 1);
+
+	} while (!ret);
+
+	return ret;
+}
+
diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h
index 67f5d35a73d3..4e590a167160 100644
--- a/arch/x86/include/asm/mshyperv.h
+++ b/arch/x86/include/asm/mshyperv.h
@@ -80,6 +80,10 @@ extern void  __percpu  **hyperv_pcpu_output_arg;
 
 extern u64 hv_current_partition_id;
 
+int hv_call_deposit_pages(int node, u64 partition_id, u32 num_pages);
+int hv_call_add_logical_proc(int node, u32 lp_index, u32 acpi_id);
+int hv_call_create_vp(int node, u64 partition_id, u32 vp_index, u32 flags);
+
 static inline u64 hv_do_hypercall(u64 control, void *input, void *output)
 {
 	u64 input_address = input ? virt_to_phys(input) : 0;
diff --git a/include/asm-generic/hyperv-tlfs.h b/include/asm-generic/hyperv-tlfs.h
index 87b1a79b19eb..69de4e3d89d3 100644
--- a/include/asm-generic/hyperv-tlfs.h
+++ b/include/asm-generic/hyperv-tlfs.h
@@ -142,6 +142,8 @@ struct ms_hyperv_tsc_page {
 #define HVCALL_FLUSH_VIRTUAL_ADDRESS_LIST_EX	0x0014
 #define HVCALL_SEND_IPI_EX			0x0015
 #define HVCALL_GET_PARTITION_ID			0x0046
+#define HVCALL_DEPOSIT_MEMORY			0x0048
+#define HVCALL_CREATE_VP			0x004e
 #define HVCALL_GET_VP_REGISTERS			0x0050
 #define HVCALL_SET_VP_REGISTERS			0x0051
 #define HVCALL_POST_MESSAGE			0x005c
@@ -149,6 +151,7 @@ struct ms_hyperv_tsc_page {
 #define HVCALL_POST_DEBUG_DATA			0x0069
 #define HVCALL_RETRIEVE_DEBUG_DATA		0x006a
 #define HVCALL_RESET_DEBUG_SESSION		0x006b
+#define HVCALL_ADD_LOGICAL_PROCESSOR		0x0076
 #define HVCALL_RETARGET_INTERRUPT		0x007e
 #define HVCALL_FLUSH_GUEST_PHYSICAL_ADDRESS_SPACE 0x00af
 #define HVCALL_FLUSH_GUEST_PHYSICAL_ADDRESS_LIST 0x00b0
@@ -413,6 +416,70 @@ struct hv_get_partition_id {
 	u64 partition_id;
 } __packed;
 
+/* HvDepositMemory hypercall */
+struct hv_deposit_memory {
+	u64 partition_id;
+	u64 gpa_page_list[];
+} __packed;
+
+struct hv_proximity_domain_flags {
+	u32 proximity_preferred : 1;
+	u32 reserved : 30;
+	u32 proximity_info_valid : 1;
+} __packed;
+
+/* Not a union in windows but useful for zeroing */
+union hv_proximity_domain_info {
+	struct {
+		u32 domain_id;
+		struct hv_proximity_domain_flags flags;
+	};
+	u64 as_uint64;
+} __packed;
+
+struct hv_lp_startup_status {
+	u64 hv_status;
+	u64 substatus1;
+	u64 substatus2;
+	u64 substatus3;
+	u64 substatus4;
+	u64 substatus5;
+	u64 substatus6;
+} __packed;
+
+/* HvAddLogicalProcessor hypercall */
+struct hv_add_logical_processor_in {
+	u32 lp_index;
+	u32 apic_id;
+	union hv_proximity_domain_info proximity_domain_info;
+	u64 flags;
+} __packed;
+
+struct hv_add_logical_processor_out {
+	struct hv_lp_startup_status startup_status;
+} __packed;
+
+enum HV_SUBNODE_TYPE
+{
+    HvSubnodeAny = 0,
+    HvSubnodeSocket = 1,
+    HvSubnodeAmdNode = 2,
+    HvSubnodeL3 = 3,
+    HvSubnodeCount = 4,
+    HvSubnodeInvalid = -1
+};
+
+/* HvCreateVp hypercall */
+struct hv_create_vp {
+	u64 partition_id;
+	u32 vp_index;
+	u8 padding[3];
+	u8 subnode_type;
+	u64 subnode_id;
+	union hv_proximity_domain_info proximity_domain_info;
+	u64 flags;
+} __packed;
+
 /* HvRetargetDeviceInterrupt hypercall */
 union hv_msi_entry {
 	u64 as_uint64;
-- 
2.20.1


  parent reply	other threads:[~2021-02-03 15:12 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-03 15:04 [PATCH v6 00/16] Introducing Linux root partition support for Microsoft Hypervisor Wei Liu
2021-02-03 15:04 ` [PATCH v6 01/16] asm-generic/hyperv: change HV_CPU_POWER_MANAGEMENT to HV_CPU_MANAGEMENT Wei Liu
2021-02-03 15:04 ` [PATCH v6 02/16] x86/hyperv: detect if Linux is the root partition Wei Liu
2021-02-04 16:49   ` Michael Kelley
2021-02-04 16:49     ` Michael Kelley via Virtualization
2021-02-03 15:04 ` [PATCH v6 03/16] Drivers: hv: vmbus: skip VMBus initialization if Linux is root Wei Liu
2021-02-03 15:04 ` [PATCH v6 04/16] clocksource/hyperv: use MSR-based access if running as root Wei Liu
2021-02-03 15:04 ` [PATCH v6 05/16] x86/hyperv: allocate output arg pages if required Wei Liu
2021-02-04 16:52   ` Michael Kelley
2021-02-04 16:52     ` Michael Kelley via Virtualization
2021-02-03 15:04 ` [PATCH v6 06/16] x86/hyperv: extract partition ID from Microsoft Hypervisor if necessary Wei Liu
2021-02-04 16:54   ` Michael Kelley
2021-02-04 16:54     ` Michael Kelley via Virtualization
2021-02-03 15:04 ` [PATCH v6 07/16] x86/hyperv: handling hypercall page setup for root Wei Liu
2021-02-03 15:04 ` [PATCH v6 08/16] ACPI / NUMA: add a stub function for node_to_pxm() Wei Liu
2021-02-04 16:56   ` Michael Kelley via Virtualization
2021-02-04 18:38   ` Wei Liu
2021-02-04 18:45     ` Rafael J. Wysocki
2021-02-04 18:45       ` [Devel] " Rafael J. Wysocki
2021-02-04 18:45       ` Rafael J. Wysocki
2021-02-04 18:48       ` Wei Liu
2021-02-03 15:04 ` Wei Liu [this message]
2021-02-04 17:13   ` [PATCH v6 09/16] x86/hyperv: provide a bunch of helper functions Michael Kelley
2021-02-04 17:13     ` Michael Kelley via Virtualization
2021-02-03 15:04 ` [PATCH v6 10/16] x86/hyperv: implement and use hv_smp_prepare_cpus Wei Liu
2021-02-03 15:04 ` [PATCH v6 11/16] asm-generic/hyperv: update hv_msi_entry Wei Liu
2021-02-03 15:04 ` [PATCH v6 12/16] asm-generic/hyperv: update hv_interrupt_entry Wei Liu
2021-02-03 15:04 ` [PATCH v6 13/16] asm-generic/hyperv: introduce hv_device_id and auxiliary structures Wei Liu
2021-02-04 17:15   ` Michael Kelley
2021-02-04 17:15     ` Michael Kelley via Virtualization
2021-02-03 15:04 ` [PATCH v6 14/16] asm-generic/hyperv: import data structures for mapping device interrupts Wei Liu
2021-02-03 15:04 ` [PATCH v6 15/16] x86/hyperv: implement an MSI domain for root partition Wei Liu
2021-02-04 17:43   ` Michael Kelley
2021-02-04 17:43     ` Michael Kelley via Virtualization
2021-02-04 17:56     ` Wei Liu
2021-02-04 18:40       ` Michael Kelley
2021-02-04 18:40         ` Michael Kelley via Virtualization
2021-02-04 18:43         ` Wei Liu
2021-02-03 15:04 ` [PATCH v6 16/16] iommu/hyperv: setup an IO-APIC IRQ remapping " Wei Liu
2021-02-03 15:04   ` Wei Liu
2021-02-04 13:33   ` Joerg Roedel
2021-02-04 13:33     ` Joerg Roedel
2021-02-04 13:33     ` Joerg Roedel
2021-02-04 17:53   ` Michael Kelley
2021-02-04 17:53     ` Michael Kelley via Virtualization
2021-02-04 17:53     ` Michael Kelley via iommu
2021-02-04 19:49 ` [PATCH v6 00/16] Introducing Linux root partition support for Microsoft Hypervisor Wei Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210203150435.27941-10-wei.liu@kernel.org \
    --to=wei.liu@kernel.org \
    --cc=arnd@arndb.de \
    --cc=bp@alien8.de \
    --cc=haiyangz@microsoft.com \
    --cc=hpa@zytor.com \
    --cc=kys@microsoft.com \
    --cc=ligrassi@microsoft.com \
    --cc=linux-arch@vger.kernel.org \
    --cc=linux-hyperv@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mikelley@microsoft.com \
    --cc=mingo@redhat.com \
    --cc=nunodasneves@linux.microsoft.com \
    --cc=pasha.tatashin@soleen.com \
    --cc=sthemmin@microsoft.com \
    --cc=sunilmut@microsoft.com \
    --cc=tglx@linutronix.de \
    --cc=viremana@linux.microsoft.com \
    --cc=virtualization@lists.linux-foundation.org \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.