From: Geert Uytterhoeven <geert+renesas@glider.be> To: Magnus Damm <magnus.damm@gmail.com> Cc: linux-renesas-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, Geert Uytterhoeven <geert+renesas@glider.be> Subject: [PATCH 2/5] ARM: dts: renesas: Group tuples in playback and capture properties Date: Thu, 4 Feb 2021 14:05:14 +0100 [thread overview] Message-ID: <20210204130517.1647073-3-geert+renesas@glider.be> (raw) In-Reply-To: <20210204130517.1647073-1-geert+renesas@glider.be> To improve human readability and enable automatic validation, the tuples in "playback" and "capture" properties in sound device nodes should be grouped using angle brackets. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- arch/arm/boot/dts/iwg20d-q7-common.dtsi | 4 ++-- arch/arm/boot/dts/r8a7742-iwg21d-q7.dts | 4 ++-- arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts | 4 ++-- arch/arm/boot/dts/r8a7790-lager.dts | 4 ++-- arch/arm/boot/dts/r8a7791-koelsch.dts | 4 ++-- arch/arm/boot/dts/r8a7793-gose.dts | 4 ++-- 6 files changed, 12 insertions(+), 12 deletions(-) diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi index 63cafd220dba1d04..bc857676d19104a1 100644 --- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi +++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi @@ -325,8 +325,8 @@ &rcar_sound { rcar_sound,dai { dai0 { - playback = <&ssi1 &src3 &dvc1>; - capture = <&ssi0 &src2 &dvc0>; + playback = <&ssi1>, <&src3>, <&dvc1>; + capture = <&ssi0>, <&src2>, <&dvc0>; }; }; }; diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts index 0063ef92f50e35f1..94bf8a116b5242a9 100644 --- a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts @@ -387,8 +387,8 @@ &rcar_sound { rcar_sound,dai { dai0 { - playback = <&ssi4 &src4 &dvc1>; - capture = <&ssi3 &src3 &dvc0>; + playback = <&ssi4>, <&src4>, <&dvc1>; + capture = <&ssi3>, <&src3>, <&dvc0>; }; }; }; diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts index 1c7b37a01f0ab923..73bd62d8a929e5da 100644 --- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts +++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts @@ -289,8 +289,8 @@ &rcar_sound { rcar_sound,dai { dai0 { - playback = <&ssi3 &src3 &dvc0>; - capture = <&ssi4 &src4 &dvc1>; + playback = <&ssi3>, <&src3>, <&dvc0>; + capture = <&ssi4>, <&src4>, <&dvc1>; }; }; }; diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 09a152b9155754ac..58687f2af3c504a8 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -918,8 +918,8 @@ &rcar_sound { rcar_sound,dai { dai0 { - playback = <&ssi0 &src2 &dvc0>; - capture = <&ssi1 &src3 &dvc1>; + playback = <&ssi0>, <&src2>, <&dvc0>; + capture = <&ssi1>, <&src3>, <&dvc1>; }; }; }; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index f603cba5441fcb9e..7f58e56bcf13935e 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -888,8 +888,8 @@ &rcar_sound { rcar_sound,dai { dai0 { - playback = <&ssi0 &src2 &dvc0>; - capture = <&ssi1 &src3 &dvc1>; + playback = <&ssi0>, <&src2>, <&dvc0>; + capture = <&ssi1>, <&src3>, <&dvc1>; }; }; }; diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index abf487e8fe0f366f..7516811f98e20ae7 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -761,8 +761,8 @@ &rcar_sound { rcar_sound,dai { dai0 { - playback = <&ssi0 &src2 &dvc0>; - capture = <&ssi1 &src3 &dvc1>; + playback = <&ssi0>, <&src2>, <&dvc0>; + capture = <&ssi1>, <&src3>, <&dvc1>; }; }; }; -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Geert Uytterhoeven <geert+renesas@glider.be> To: Magnus Damm <magnus.damm@gmail.com> Cc: linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org, Geert Uytterhoeven <geert+renesas@glider.be>, linux-arm-kernel@lists.infradead.org Subject: [PATCH 2/5] ARM: dts: renesas: Group tuples in playback and capture properties Date: Thu, 4 Feb 2021 14:05:14 +0100 [thread overview] Message-ID: <20210204130517.1647073-3-geert+renesas@glider.be> (raw) In-Reply-To: <20210204130517.1647073-1-geert+renesas@glider.be> To improve human readability and enable automatic validation, the tuples in "playback" and "capture" properties in sound device nodes should be grouped using angle brackets. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- arch/arm/boot/dts/iwg20d-q7-common.dtsi | 4 ++-- arch/arm/boot/dts/r8a7742-iwg21d-q7.dts | 4 ++-- arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts | 4 ++-- arch/arm/boot/dts/r8a7790-lager.dts | 4 ++-- arch/arm/boot/dts/r8a7791-koelsch.dts | 4 ++-- arch/arm/boot/dts/r8a7793-gose.dts | 4 ++-- 6 files changed, 12 insertions(+), 12 deletions(-) diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi index 63cafd220dba1d04..bc857676d19104a1 100644 --- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi +++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi @@ -325,8 +325,8 @@ &rcar_sound { rcar_sound,dai { dai0 { - playback = <&ssi1 &src3 &dvc1>; - capture = <&ssi0 &src2 &dvc0>; + playback = <&ssi1>, <&src3>, <&dvc1>; + capture = <&ssi0>, <&src2>, <&dvc0>; }; }; }; diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts index 0063ef92f50e35f1..94bf8a116b5242a9 100644 --- a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts @@ -387,8 +387,8 @@ &rcar_sound { rcar_sound,dai { dai0 { - playback = <&ssi4 &src4 &dvc1>; - capture = <&ssi3 &src3 &dvc0>; + playback = <&ssi4>, <&src4>, <&dvc1>; + capture = <&ssi3>, <&src3>, <&dvc0>; }; }; }; diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts index 1c7b37a01f0ab923..73bd62d8a929e5da 100644 --- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts +++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts @@ -289,8 +289,8 @@ &rcar_sound { rcar_sound,dai { dai0 { - playback = <&ssi3 &src3 &dvc0>; - capture = <&ssi4 &src4 &dvc1>; + playback = <&ssi3>, <&src3>, <&dvc0>; + capture = <&ssi4>, <&src4>, <&dvc1>; }; }; }; diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 09a152b9155754ac..58687f2af3c504a8 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -918,8 +918,8 @@ &rcar_sound { rcar_sound,dai { dai0 { - playback = <&ssi0 &src2 &dvc0>; - capture = <&ssi1 &src3 &dvc1>; + playback = <&ssi0>, <&src2>, <&dvc0>; + capture = <&ssi1>, <&src3>, <&dvc1>; }; }; }; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index f603cba5441fcb9e..7f58e56bcf13935e 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -888,8 +888,8 @@ &rcar_sound { rcar_sound,dai { dai0 { - playback = <&ssi0 &src2 &dvc0>; - capture = <&ssi1 &src3 &dvc1>; + playback = <&ssi0>, <&src2>, <&dvc0>; + capture = <&ssi1>, <&src3>, <&dvc1>; }; }; }; diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index abf487e8fe0f366f..7516811f98e20ae7 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -761,8 +761,8 @@ &rcar_sound { rcar_sound,dai { dai0 { - playback = <&ssi0 &src2 &dvc0>; - capture = <&ssi1 &src3 &dvc1>; + playback = <&ssi0>, <&src2>, <&dvc0>; + capture = <&ssi1>, <&src3>, <&dvc1>; }; }; }; -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-02-04 18:09 UTC|newest] Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-02-04 13:05 [PATCH 0/5] arm: dts: renesas: Group tuples in cpus, playback, capture, and pin control properties Geert Uytterhoeven 2021-02-04 13:05 ` Geert Uytterhoeven 2021-02-04 13:05 ` [PATCH 1/5] ARM: dts: renesas: Group tuples in APMU cpus properties Geert Uytterhoeven 2021-02-04 13:05 ` Geert Uytterhoeven 2021-02-04 13:05 ` Geert Uytterhoeven [this message] 2021-02-04 13:05 ` [PATCH 2/5] ARM: dts: renesas: Group tuples in playback and capture properties Geert Uytterhoeven 2021-02-04 13:05 ` [PATCH 3/5] ARM: dts: renesas: Group tuples in pin control properties Geert Uytterhoeven 2021-02-04 13:05 ` Geert Uytterhoeven 2021-02-04 13:05 ` [PATCH 4/5] arm64: dts: renesas: Group tuples in playback and capture properties Geert Uytterhoeven 2021-02-04 13:05 ` Geert Uytterhoeven 2021-02-04 13:05 ` [PATCH 5/5] arm64: dts: renesas: Group tuples in pin control properties Geert Uytterhoeven 2021-02-04 13:05 ` Geert Uytterhoeven
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210204130517.1647073-3-geert+renesas@glider.be \ --to=geert+renesas@glider.be \ --cc=devicetree@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-renesas-soc@vger.kernel.org \ --cc=magnus.damm@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.