[PATCH v2 2/3] phy: qcom-qmp: Add UFS V5 registers found in SM8350

[Vinod Koul <vkoul@kernel.org>]

Add the registers for UFS found in SM8350. The UFS phy used in SM8350
seems to have same offsets as V5 phy, although Documentation for that is
lacking.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp.h | 47 +++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index dff7be5a1cc1..71ce3aa174ae 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -824,6 +824,32 @@
 #define QPHY_V4_PCS_PCIE_PRESET_P10_PRE			0xbc
 #define QPHY_V4_PCS_PCIE_PRESET_P10_POST		0xe0
 
+/* Only for QMP V5 PHY - QSERDES COM registers */
+#define QSERDES_V5_COM_PLL_IVCO				0x058
+#define QSERDES_V5_COM_CP_CTRL_MODE0			0x074
+#define QSERDES_V5_COM_CP_CTRL_MODE1			0x078
+#define QSERDES_V5_COM_PLL_RCTRL_MODE0			0x07c
+#define QSERDES_V5_COM_PLL_RCTRL_MODE1			0x080
+#define QSERDES_V5_COM_PLL_CCTRL_MODE0			0x084
+#define QSERDES_V5_COM_PLL_CCTRL_MODE1			0x088
+#define QSERDES_V5_COM_SYSCLK_EN_SEL			0x094
+#define QSERDES_V5_COM_LOCK_CMP_EN			0x0a4
+#define QSERDES_V5_COM_LOCK_CMP1_MODE0			0x0ac
+#define QSERDES_V5_COM_LOCK_CMP2_MODE0			0x0b0
+#define QSERDES_V5_COM_LOCK_CMP1_MODE1			0x0b4
+#define QSERDES_V5_COM_DEC_START_MODE0			0x0bc
+#define QSERDES_V5_COM_LOCK_CMP2_MODE1			0x0b8
+#define QSERDES_V5_COM_DEC_START_MODE1			0x0c4
+#define QSERDES_V5_COM_VCO_TUNE_MAP			0x10c
+#define QSERDES_V5_COM_VCO_TUNE_INITVAL2		0x124
+#define QSERDES_V5_COM_HSCLK_SEL			0x158
+#define QSERDES_V5_COM_HSCLK_HS_SWITCH_SEL		0x15c
+#define QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE0	0x1ac
+#define QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE0	0x1b0
+#define QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE1	0x1b4
+#define QSERDES_V5_COM_BIN_VCOCAL_HSCLK_SEL		0x1bc
+#define QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE1	0x1b8
+
 /* Only for QMP V5 PHY - TX registers */
 #define QSERDES_V5_TX_RES_CODE_LANE_TX			0x34
 #define QSERDES_V5_TX_RES_CODE_LANE_RX			0x38
@@ -837,6 +863,10 @@
 #define QSERDES_V5_TX_RCV_DETECT_LVL_2			0xa4
 #define QSERDES_V5_TX_TRAN_DRVR_EMP_EN			0xc0
 #define QSERDES_V5_TX_PI_QEC_CTRL			0xe4
+#define QSERDES_V5_TX_PWM_GEAR_1_DIVIDER_BAND0_1	0x178
+#define QSERDES_V5_TX_PWM_GEAR_2_DIVIDER_BAND0_1	0x17c
+#define QSERDES_V5_TX_PWM_GEAR_3_DIVIDER_BAND0_1	0x180
+#define QSERDES_V5_TX_PWM_GEAR_4_DIVIDER_BAND0_1	0x184
 
 /* Only for QMP V5 PHY - RX registers */
 #define QSERDES_V5_RX_UCDR_FO_GAIN			0x008
@@ -893,6 +923,23 @@
 #define QSERDES_V5_RX_DCC_CTRL1				0x1a8
 #define QSERDES_V5_RX_VTH_CODE				0x1b0
 
+/* Only for QMP V5 PHY - UFS PCS registers */
+#define QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_MSB	0x00c
+#define QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_LSB	0x010
+#define QPHY_V5_PCS_UFS_PLL_CNTL			0x02c
+#define QPHY_V5_PCS_UFS_TX_LARGE_AMP_DRV_LVL		0x030
+#define QPHY_V5_PCS_UFS_TX_SMALL_AMP_DRV_LVL		0x038
+#define QPHY_V5_PCS_UFS_TX_HSGEAR_CAPABILITY		0x074
+#define QPHY_V5_PCS_UFS_RX_HSGEAR_CAPABILITY		0x0b4
+#define QPHY_V5_PCS_UFS_DEBUG_BUS_CLKSEL		0x124
+#define QPHY_V5_PCS_UFS_RX_MIN_HIBERN8_TIME		0x150
+#define QPHY_V5_PCS_UFS_RX_SIGDET_CTRL1			0x154
+#define QPHY_V5_PCS_UFS_RX_SIGDET_CTRL2			0x158
+#define QPHY_V5_PCS_UFS_TX_PWM_GEAR_BAND		0x160
+#define QPHY_V5_PCS_UFS_TX_HS_GEAR_BAND			0x168
+#define QPHY_V5_PCS_UFS_TX_MID_TERM_CTRL1		0x1d8
+#define QPHY_V5_PCS_UFS_MULTI_LANE_CTRL1		0x1e0
+
 /* Only for QMP V5 PHY - USB3 have different offsets than V4 */
 #define QPHY_V5_PCS_USB3_POWER_STATE_CONFIG1		0x300
 #define QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_STATUS		0x304
-- 
2.26.2