[PATCH 15/24] hw/arm/mps2-tz: Allow boards to have different PPCInfo data

[Peter Maydell <peter.maydell@linaro.org>]

The AN505 and AN521 have the same device layout, but the AN524 is
somewhat different.  Allow for more than one PPCInfo array, which can
be selected based on the board type.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
We can't just put the arrays at file-scope and set up pointers
to them in the MPS2TZMachineClass struct, because the array
members include entries like "&mms->uart[0]" which is only valid
inside the mps2tz_common_init() function.
---
 hw/arm/mps2-tz.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/hw/arm/mps2-tz.c b/hw/arm/mps2-tz.c
index 87993516816..721ac444920 100644
--- a/hw/arm/mps2-tz.c
+++ b/hw/arm/mps2-tz.c
@@ -423,6 +423,8 @@ static void mps2tz_common_init(MachineState *machine)
     MemoryRegion *system_memory = get_system_memory();
     DeviceState *iotkitdev;
     DeviceState *dev_splitter;
+    const PPCInfo *ppcs;
+    int num_ppcs;
     int i;
 
     if (strcmp(machine->cpu_type, mc->default_cpu_type) != 0) {
@@ -544,7 +546,7 @@ static void mps2tz_common_init(MachineState *machine)
      *  + wire up the PPC's control lines to the IoTKit object
      */
 
-    const PPCInfo ppcs[] = { {
+    const PPCInfo an505_ppcs[] = { {
             .name = "apb_ppcexp0",
             .ports = {
                 { "ssram-0", make_mpc, &mms->ssram_mpc[0], 0x58007000, 0x1000 },
@@ -598,7 +600,17 @@ static void mps2tz_common_init(MachineState *machine)
         },
     };
 
-    for (i = 0; i < ARRAY_SIZE(ppcs); i++) {
+    switch (mmc->fpga_type) {
+    case FPGA_AN505:
+    case FPGA_AN521:
+        ppcs = an505_ppcs;
+        num_ppcs = ARRAY_SIZE(an505_ppcs);
+        break;
+    default:
+        g_assert_not_reached();
+    }
+
+    for (i = 0; i < num_ppcs; i++) {
         const PPCInfo *ppcinfo = &ppcs[i];
         TZPPC *ppc = &mms->ppc[i];
         DeviceState *ppcdev;
-- 
2.20.1