From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> To: broonie@kernel.org Cc: perex@perex.cz, alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org, lgirdwood@gmail.com, devicetree@vger.kernel.org, robh+dt@kernel.org, Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Subject: [PATCH v3 0/7] ASoC: codecs: add support for LPASS Codec TX and RX macros Date: Mon, 8 Feb 2021 18:01:02 +0000 [thread overview] Message-ID: <20210208180109.518-1-srinivas.kandagatla@linaro.org> (raw) Thanks for reviewing v2, here is v3 patchset addressing comments from v2. This patchset adds support for two Codec Macro blocks(TX and RX) available in Qualcomm LPASS (Low Power Audio SubSystem). There are WSA, VA, TX and RX Macros on LPASS IP, each of the Macro block has specific connectivity like WSA Macros are intended to connect to WSA Smart speaker codecs via SoundWire. VA Macro is intended for DMICs, and TX/RX for Analog codecs via SoundWire like other WCD938x Codecs to provide headphone/ear/lineout/amic/dmic etc .. Most of the work is derived from downstream Qualcomm kernels. Credits to various Qualcomm authors from Patrick Lai's team who have contributed to this code. This patchset has been tested on support to SM8250 MTP Development Board. This board has 2 WSA881X smart speakers with onboard DMIC connected to internal LPASS codec via WSA and VA macros respectively and WCD938x TX and RX connected via Soundwire via TX and RX Macros reseptively. Thanks, srini Changes since v2: - Suffix some of the simple on/off control names with "Switch" Srinivas Kandagatla (7): ASoC: qcom: dt-bindings: add bindings for lpass rx macro codec ASoC: codecs: lpass-rx-macro: add support for lpass rx macro ASoC: codecs: lpass-rx-macro: add dapm widgets and route ASoC: codecs: lpass-rx-macro: add iir widgets ASoC: qcom: dt-bindings: add bindings for lpass tx macro codec ASoC: codecs: lpass-tx-macro: add support for lpass tx macro ASoC: codecs: lpass-tx-macro: add dapm widgets and route .../bindings/sound/qcom,lpass-rx-macro.yaml | 62 + .../bindings/sound/qcom,lpass-tx-macro.yaml | 67 + sound/soc/codecs/Kconfig | 10 + sound/soc/codecs/Makefile | 4 + sound/soc/codecs/lpass-rx-macro.c | 3604 +++++++++++++++++ sound/soc/codecs/lpass-tx-macro.c | 1877 +++++++++ 6 files changed, 5624 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml create mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml create mode 100644 sound/soc/codecs/lpass-rx-macro.c create mode 100644 sound/soc/codecs/lpass-tx-macro.c -- 2.21.0
WARNING: multiple messages have this Message-ID (diff)
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> To: broonie@kernel.org Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org, lgirdwood@gmail.com, linux-kernel@vger.kernel.org, robh+dt@kernel.org, Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Subject: [PATCH v3 0/7] ASoC: codecs: add support for LPASS Codec TX and RX macros Date: Mon, 8 Feb 2021 18:01:02 +0000 [thread overview] Message-ID: <20210208180109.518-1-srinivas.kandagatla@linaro.org> (raw) Thanks for reviewing v2, here is v3 patchset addressing comments from v2. This patchset adds support for two Codec Macro blocks(TX and RX) available in Qualcomm LPASS (Low Power Audio SubSystem). There are WSA, VA, TX and RX Macros on LPASS IP, each of the Macro block has specific connectivity like WSA Macros are intended to connect to WSA Smart speaker codecs via SoundWire. VA Macro is intended for DMICs, and TX/RX for Analog codecs via SoundWire like other WCD938x Codecs to provide headphone/ear/lineout/amic/dmic etc .. Most of the work is derived from downstream Qualcomm kernels. Credits to various Qualcomm authors from Patrick Lai's team who have contributed to this code. This patchset has been tested on support to SM8250 MTP Development Board. This board has 2 WSA881X smart speakers with onboard DMIC connected to internal LPASS codec via WSA and VA macros respectively and WCD938x TX and RX connected via Soundwire via TX and RX Macros reseptively. Thanks, srini Changes since v2: - Suffix some of the simple on/off control names with "Switch" Srinivas Kandagatla (7): ASoC: qcom: dt-bindings: add bindings for lpass rx macro codec ASoC: codecs: lpass-rx-macro: add support for lpass rx macro ASoC: codecs: lpass-rx-macro: add dapm widgets and route ASoC: codecs: lpass-rx-macro: add iir widgets ASoC: qcom: dt-bindings: add bindings for lpass tx macro codec ASoC: codecs: lpass-tx-macro: add support for lpass tx macro ASoC: codecs: lpass-tx-macro: add dapm widgets and route .../bindings/sound/qcom,lpass-rx-macro.yaml | 62 + .../bindings/sound/qcom,lpass-tx-macro.yaml | 67 + sound/soc/codecs/Kconfig | 10 + sound/soc/codecs/Makefile | 4 + sound/soc/codecs/lpass-rx-macro.c | 3604 +++++++++++++++++ sound/soc/codecs/lpass-tx-macro.c | 1877 +++++++++ 6 files changed, 5624 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml create mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml create mode 100644 sound/soc/codecs/lpass-rx-macro.c create mode 100644 sound/soc/codecs/lpass-tx-macro.c -- 2.21.0
next reply other threads:[~2021-02-08 19:38 UTC|newest] Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-02-08 18:01 Srinivas Kandagatla [this message] 2021-02-08 18:01 ` [PATCH v3 0/7] ASoC: codecs: add support for LPASS Codec TX and RX macros Srinivas Kandagatla 2021-02-08 18:01 ` [PATCH v3 1/7] ASoC: qcom: dt-bindings: add bindings for lpass rx macro codec Srinivas Kandagatla 2021-02-08 18:01 ` Srinivas Kandagatla 2021-02-08 18:01 ` [PATCH v3 2/7] ASoC: codecs: lpass-rx-macro: add support for lpass rx macro Srinivas Kandagatla 2021-02-08 18:01 ` Srinivas Kandagatla 2021-02-08 18:01 ` [PATCH v3 3/7] ASoC: codecs: lpass-rx-macro: add dapm widgets and route Srinivas Kandagatla 2021-02-08 18:01 ` Srinivas Kandagatla 2021-02-08 18:01 ` [PATCH v3 4/7] ASoC: codecs: lpass-rx-macro: add iir widgets Srinivas Kandagatla 2021-02-08 18:01 ` Srinivas Kandagatla 2021-02-08 18:01 ` [PATCH v3 5/7] ASoC: qcom: dt-bindings: add bindings for lpass tx macro codec Srinivas Kandagatla 2021-02-08 18:01 ` Srinivas Kandagatla 2021-02-08 18:01 ` [PATCH v3 6/7] ASoC: codecs: lpass-tx-macro: add support for lpass tx macro Srinivas Kandagatla 2021-02-08 18:01 ` Srinivas Kandagatla 2021-02-09 1:43 ` kernel test robot 2021-02-09 1:43 ` kernel test robot 2021-02-09 1:43 ` kernel test robot 2021-02-08 18:01 ` [PATCH v3 7/7] ASoC: codecs: lpass-tx-macro: add dapm widgets and route Srinivas Kandagatla 2021-02-08 18:01 ` Srinivas Kandagatla
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210208180109.518-1-srinivas.kandagatla@linaro.org \ --to=srinivas.kandagatla@linaro.org \ --cc=alsa-devel@alsa-project.org \ --cc=broonie@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=lgirdwood@gmail.com \ --cc=linux-kernel@vger.kernel.org \ --cc=perex@perex.cz \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.