From: Vladimir Oltean <olteanv@gmail.com> To: Jakub Kicinski <kuba@kernel.org>, "David S. Miller" <davem@davemloft.net> Cc: Andrew Lunn <andrew@lunn.ch>, Vivien Didelot <vivien.didelot@gmail.com>, Florian Fainelli <f.fainelli@gmail.com>, netdev@vger.kernel.org, linux-kernel@vger.kernel.org, bridge@lists.linux-foundation.org, Roopa Prabhu <roopa@nvidia.com>, Nikolay Aleksandrov <nikolay@nvidia.com>, Jiri Pirko <jiri@resnulli.us>, Ido Schimmel <idosch@idosch.org>, Claudiu Manoil <claudiu.manoil@nxp.com>, Alexandre Belloni <alexandre.belloni@bootlin.com>, UNGLinuxDriver@microchip.com, Vadym Kochan <vkochan@marvell.com>, Taras Chornyi <tchornyi@marvell.com>, Grygorii Strashko <grygorii.strashko@ti.com>, Ioana Ciornei <ioana.ciornei@nxp.com>, Ivan Vecera <ivecera@redhat.com>, linux-omap@vger.kernel.org Subject: [PATCH v3 net-next 00/11] Cleanup in brport flags switchdev offload for DSA Date: Wed, 10 Feb 2021 11:14:34 +0200 [thread overview] Message-ID: <20210210091445.741269-1-olteanv@gmail.com> (raw) From: Vladimir Oltean <vladimir.oltean@nxp.com> The initial goal of this series was to have better support for standalone ports mode and multiple bridges on the DSA drivers like ocelot/felix and sja1105. Proper support for standalone mode requires disabling address learning, which in turn requires interaction with the switchdev notifier, which is actually where most of the patches are. I also noticed that most of the drivers are actually talking either to firmware or SPI/MDIO connected devices from the brport flags switchdev attribute handler, so it makes sense to actually make it sleepable instead of atomic. Vladimir Oltean (11): net: switchdev: propagate extack to port attributes net: bridge: offload all port flags at once in br_setport net: bridge: don't print in br_switchdev_set_port_flag net: dsa: configure proper brport flags when ports leave the bridge net: squash switchdev attributes PRE_BRIDGE_FLAGS and BRIDGE_FLAGS net: dsa: kill .port_egress_floods overengineering net: prep switchdev drivers for concurrent SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS net: bridge: put SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS on the blocking call chain net: mscc: ocelot: use separate flooding PGID for broadcast net: mscc: ocelot: offload bridge port flags to device net: dsa: sja1105: offload bridge port flags to device drivers/net/dsa/b53/b53_common.c | 20 +- drivers/net/dsa/mv88e6xxx/chip.c | 21 +- drivers/net/dsa/ocelot/felix.c | 10 + drivers/net/dsa/sja1105/sja1105.h | 2 + drivers/net/dsa/sja1105/sja1105_main.c | 212 +++++++++++++++++- drivers/net/dsa/sja1105/sja1105_spi.c | 6 + .../marvell/prestera/prestera_switchdev.c | 54 +++-- .../mellanox/mlxsw/spectrum_switchdev.c | 90 ++++---- drivers/net/ethernet/mscc/ocelot.c | 72 +++++- drivers/net/ethernet/mscc/ocelot_net.c | 7 +- drivers/net/ethernet/rocker/rocker.h | 2 +- drivers/net/ethernet/rocker/rocker_main.c | 24 +- drivers/net/ethernet/rocker/rocker_ofdpa.c | 26 ++- drivers/net/ethernet/ti/cpsw_switchdev.c | 35 ++- drivers/staging/fsl-dpaa2/ethsw/ethsw.c | 43 ++-- include/net/dsa.h | 7 +- include/net/switchdev.h | 14 +- include/soc/mscc/ocelot.h | 18 +- net/bridge/br_netlink.c | 162 ++++++------- net/bridge/br_private.h | 6 +- net/bridge/br_switchdev.c | 33 ++- net/bridge/br_sysfs_if.c | 21 +- net/dsa/dsa_priv.h | 8 +- net/dsa/port.c | 76 ++++--- net/dsa/slave.c | 10 +- net/switchdev/switchdev.c | 11 +- 26 files changed, 654 insertions(+), 336 deletions(-) -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Vladimir Oltean <olteanv@gmail.com> To: Jakub Kicinski <kuba@kernel.org>, "David S. Miller" <davem@davemloft.net> Cc: Ivan Vecera <ivecera@redhat.com>, Andrew Lunn <andrew@lunn.ch>, Alexandre Belloni <alexandre.belloni@bootlin.com>, Florian Fainelli <f.fainelli@gmail.com>, Jiri Pirko <jiri@resnulli.us>, Vadym Kochan <vkochan@marvell.com>, netdev@vger.kernel.org, bridge@lists.linux-foundation.org, Ioana Ciornei <ioana.ciornei@nxp.com>, linux-kernel@vger.kernel.org, UNGLinuxDriver@microchip.com, Taras Chornyi <tchornyi@marvell.com>, Ido Schimmel <idosch@idosch.org>, Claudiu Manoil <claudiu.manoil@nxp.com>, Grygorii Strashko <grygorii.strashko@ti.com>, Nikolay Aleksandrov <nikolay@nvidia.com>, Roopa Prabhu <roopa@nvidia.com>, linux-omap@vger.kernel.org, Vivien Didelot <vivien.didelot@gmail.com> Subject: [Bridge] [PATCH v3 net-next 00/11] Cleanup in brport flags switchdev offload for DSA Date: Wed, 10 Feb 2021 11:14:34 +0200 [thread overview] Message-ID: <20210210091445.741269-1-olteanv@gmail.com> (raw) From: Vladimir Oltean <vladimir.oltean@nxp.com> The initial goal of this series was to have better support for standalone ports mode and multiple bridges on the DSA drivers like ocelot/felix and sja1105. Proper support for standalone mode requires disabling address learning, which in turn requires interaction with the switchdev notifier, which is actually where most of the patches are. I also noticed that most of the drivers are actually talking either to firmware or SPI/MDIO connected devices from the brport flags switchdev attribute handler, so it makes sense to actually make it sleepable instead of atomic. Vladimir Oltean (11): net: switchdev: propagate extack to port attributes net: bridge: offload all port flags at once in br_setport net: bridge: don't print in br_switchdev_set_port_flag net: dsa: configure proper brport flags when ports leave the bridge net: squash switchdev attributes PRE_BRIDGE_FLAGS and BRIDGE_FLAGS net: dsa: kill .port_egress_floods overengineering net: prep switchdev drivers for concurrent SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS net: bridge: put SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS on the blocking call chain net: mscc: ocelot: use separate flooding PGID for broadcast net: mscc: ocelot: offload bridge port flags to device net: dsa: sja1105: offload bridge port flags to device drivers/net/dsa/b53/b53_common.c | 20 +- drivers/net/dsa/mv88e6xxx/chip.c | 21 +- drivers/net/dsa/ocelot/felix.c | 10 + drivers/net/dsa/sja1105/sja1105.h | 2 + drivers/net/dsa/sja1105/sja1105_main.c | 212 +++++++++++++++++- drivers/net/dsa/sja1105/sja1105_spi.c | 6 + .../marvell/prestera/prestera_switchdev.c | 54 +++-- .../mellanox/mlxsw/spectrum_switchdev.c | 90 ++++---- drivers/net/ethernet/mscc/ocelot.c | 72 +++++- drivers/net/ethernet/mscc/ocelot_net.c | 7 +- drivers/net/ethernet/rocker/rocker.h | 2 +- drivers/net/ethernet/rocker/rocker_main.c | 24 +- drivers/net/ethernet/rocker/rocker_ofdpa.c | 26 ++- drivers/net/ethernet/ti/cpsw_switchdev.c | 35 ++- drivers/staging/fsl-dpaa2/ethsw/ethsw.c | 43 ++-- include/net/dsa.h | 7 +- include/net/switchdev.h | 14 +- include/soc/mscc/ocelot.h | 18 +- net/bridge/br_netlink.c | 162 ++++++------- net/bridge/br_private.h | 6 +- net/bridge/br_switchdev.c | 33 ++- net/bridge/br_sysfs_if.c | 21 +- net/dsa/dsa_priv.h | 8 +- net/dsa/port.c | 76 ++++--- net/dsa/slave.c | 10 +- net/switchdev/switchdev.c | 11 +- 26 files changed, 654 insertions(+), 336 deletions(-) -- 2.25.1
next reply other threads:[~2021-02-10 9:22 UTC|newest] Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-02-10 9:14 Vladimir Oltean [this message] 2021-02-10 9:14 ` [Bridge] [PATCH v3 net-next 00/11] Cleanup in brport flags switchdev offload for DSA Vladimir Oltean 2021-02-10 9:14 ` [PATCH v3 net-next 01/11] net: switchdev: propagate extack to port attributes Vladimir Oltean 2021-02-10 9:14 ` [Bridge] " Vladimir Oltean 2021-02-11 4:12 ` Florian Fainelli 2021-02-11 4:12 ` [Bridge] " Florian Fainelli 2021-02-10 9:14 ` [PATCH v3 net-next 02/11] net: bridge: offload all port flags at once in br_setport Vladimir Oltean 2021-02-10 9:14 ` [Bridge] " Vladimir Oltean 2021-02-10 9:14 ` [PATCH v3 net-next 03/11] net: bridge: don't print in br_switchdev_set_port_flag Vladimir Oltean 2021-02-10 9:14 ` [Bridge] " Vladimir Oltean 2021-02-10 9:14 ` [PATCH v3 net-next 04/11] net: dsa: configure proper brport flags when ports leave the bridge Vladimir Oltean 2021-02-10 9:14 ` [Bridge] " Vladimir Oltean 2021-02-11 4:16 ` Florian Fainelli 2021-02-11 4:16 ` [Bridge] " Florian Fainelli 2021-02-10 9:14 ` [PATCH v3 net-next 05/11] net: squash switchdev attributes PRE_BRIDGE_FLAGS and BRIDGE_FLAGS Vladimir Oltean 2021-02-10 9:14 ` [Bridge] " Vladimir Oltean 2021-02-10 9:14 ` [PATCH v3 net-next 06/11] net: dsa: kill .port_egress_floods overengineering Vladimir Oltean 2021-02-10 9:14 ` [Bridge] " Vladimir Oltean 2021-02-11 4:18 ` Florian Fainelli 2021-02-11 4:18 ` [Bridge] " Florian Fainelli 2021-02-10 9:14 ` [PATCH v3 net-next 07/11] net: prep switchdev drivers for concurrent SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS Vladimir Oltean 2021-02-10 9:14 ` [Bridge] " Vladimir Oltean 2021-02-10 10:12 ` Ido Schimmel 2021-02-10 10:12 ` [Bridge] " Ido Schimmel 2021-02-10 10:23 ` Vladimir Oltean 2021-02-10 10:23 ` [Bridge] " Vladimir Oltean 2021-02-10 23:34 ` David Miller 2021-02-10 23:34 ` [Bridge] " David Miller 2021-02-10 9:14 ` [PATCH v3 net-next 08/11] net: bridge: put SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS on the blocking call chain Vladimir Oltean 2021-02-10 9:14 ` [Bridge] " Vladimir Oltean 2021-02-10 10:14 ` Nikolay Aleksandrov 2021-02-10 10:14 ` [Bridge] " Nikolay Aleksandrov 2021-02-10 9:14 ` [PATCH v3 net-next 09/11] net: mscc: ocelot: use separate flooding PGID for broadcast Vladimir Oltean 2021-02-10 9:14 ` [Bridge] " Vladimir Oltean 2021-02-11 4:19 ` Florian Fainelli 2021-02-11 4:19 ` [Bridge] " Florian Fainelli 2021-02-10 9:14 ` [PATCH v3 net-next 10/11] net: mscc: ocelot: offload bridge port flags to device Vladimir Oltean 2021-02-10 9:14 ` [Bridge] " Vladimir Oltean 2021-02-11 4:20 ` Florian Fainelli 2021-02-11 4:20 ` [Bridge] " Florian Fainelli 2021-02-10 9:14 ` [PATCH v3 net-next 11/11] net: dsa: sja1105: " Vladimir Oltean 2021-02-10 9:14 ` [Bridge] " Vladimir Oltean 2021-02-10 10:31 ` [PATCH v3 net-next 00/11] Cleanup in brport flags switchdev offload for DSA Nikolay Aleksandrov 2021-02-10 10:31 ` [Bridge] " Nikolay Aleksandrov 2021-02-10 10:45 ` Vladimir Oltean 2021-02-10 10:45 ` [Bridge] " Vladimir Oltean 2021-02-10 10:52 ` Nikolay Aleksandrov 2021-02-10 10:52 ` [Bridge] " Nikolay Aleksandrov 2021-02-10 11:01 ` Vladimir Oltean 2021-02-10 11:01 ` [Bridge] " Vladimir Oltean 2021-02-10 11:05 ` Nikolay Aleksandrov 2021-02-10 11:05 ` [Bridge] " Nikolay Aleksandrov 2021-02-10 12:01 ` Vladimir Oltean 2021-02-10 12:01 ` [Bridge] " Vladimir Oltean 2021-02-10 12:10 ` Nikolay Aleksandrov 2021-02-10 12:10 ` [Bridge] " Nikolay Aleksandrov 2021-02-10 12:21 ` Ido Schimmel 2021-02-10 12:21 ` [Bridge] " Ido Schimmel 2021-02-10 12:29 ` Vladimir Oltean 2021-02-10 12:29 ` [Bridge] " Vladimir Oltean 2021-02-10 12:38 ` Ido Schimmel 2021-02-10 12:38 ` [Bridge] " Ido Schimmel 2021-02-10 12:55 ` Vladimir Oltean 2021-02-10 12:55 ` [Bridge] " Vladimir Oltean 2021-02-10 12:59 ` Ido Schimmel 2021-02-10 12:59 ` [Bridge] " Ido Schimmel
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210210091445.741269-1-olteanv@gmail.com \ --to=olteanv@gmail.com \ --cc=UNGLinuxDriver@microchip.com \ --cc=alexandre.belloni@bootlin.com \ --cc=andrew@lunn.ch \ --cc=bridge@lists.linux-foundation.org \ --cc=claudiu.manoil@nxp.com \ --cc=davem@davemloft.net \ --cc=f.fainelli@gmail.com \ --cc=grygorii.strashko@ti.com \ --cc=idosch@idosch.org \ --cc=ioana.ciornei@nxp.com \ --cc=ivecera@redhat.com \ --cc=jiri@resnulli.us \ --cc=kuba@kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-omap@vger.kernel.org \ --cc=netdev@vger.kernel.org \ --cc=nikolay@nvidia.com \ --cc=roopa@nvidia.com \ --cc=tchornyi@marvell.com \ --cc=vivien.didelot@gmail.com \ --cc=vkochan@marvell.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.