All of lore.kernel.org
 help / color / mirror / Atom feed
From: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
To: linux-bluetooth@vger.kernel.org
Subject: [PATCH v4 1/6] Bluetooth: btintel: Check firmware version before download
Date: Wed, 10 Feb 2021 08:59:11 -0800	[thread overview]
Message-ID: <20210210165916.2148856-1-luiz.dentz@gmail.com> (raw)

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

This checks the firmware build number, week and year matches with
repective version loaded and then skip the download process.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
v2: Add patch that mover checks for operational mode after the version
checking.
v3: Fix not checking for operation mode before using btintel_read_boot_params
since some models depend on that to contruct the fw filename. Also attempt to
cleanup duplicated code.
v4: Fix forwarding -EALREADY when firmware has already been loaded.

 drivers/bluetooth/btintel.c   | 96 +++++++++++++++++++++++++++--------
 drivers/bluetooth/btintel.h   |  5 +-
 drivers/bluetooth/btusb.c     | 18 ++++++-
 drivers/bluetooth/hci_intel.c |  7 ++-
 4 files changed, 100 insertions(+), 26 deletions(-)

diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
index 88ce5f0ffc4b..89f85d54ca64 100644
--- a/drivers/bluetooth/btintel.c
+++ b/drivers/bluetooth/btintel.c
@@ -24,6 +24,14 @@
 #define ECDSA_OFFSET		644
 #define ECDSA_HEADER_LEN	320
 
+#define CMD_WRITE_BOOT_PARAMS	0xfc0e
+struct cmd_write_boot_params {
+	u32 boot_addr;
+	u8  fw_build_num;
+	u8  fw_build_ww;
+	u8  fw_build_yy;
+} __packed;
+
 int btintel_check_bdaddr(struct hci_dev *hdev)
 {
 	struct hci_rp_read_bd_addr *bda;
@@ -841,7 +849,7 @@ static int btintel_sfi_ecdsa_header_secure_send(struct hci_dev *hdev,
 
 static int btintel_download_firmware_payload(struct hci_dev *hdev,
 					     const struct firmware *fw,
-					     u32 *boot_param, size_t offset)
+					     size_t offset)
 {
 	int err;
 	const u8 *fw_ptr;
@@ -854,20 +862,6 @@ static int btintel_download_firmware_payload(struct hci_dev *hdev,
 	while (fw_ptr - fw->data < fw->size) {
 		struct hci_command_hdr *cmd = (void *)(fw_ptr + frag_len);
 
-		/* Each SKU has a different reset parameter to use in the
-		 * HCI_Intel_Reset command and it is embedded in the firmware
-		 * data. So, instead of using static value per SKU, check
-		 * the firmware data and save it for later use.
-		 */
-		if (le16_to_cpu(cmd->opcode) == 0xfc0e) {
-			/* The boot parameter is the first 32-bit value
-			 * and rest of 3 octets are reserved.
-			 */
-			*boot_param = get_unaligned_le32(fw_ptr + sizeof(*cmd));
-
-			bt_dev_dbg(hdev, "boot_param=0x%x", *boot_param);
-		}
-
 		frag_len += sizeof(*cmd) + cmd->plen;
 
 		/* The parameter length of the secure send command requires
@@ -896,28 +890,92 @@ static int btintel_download_firmware_payload(struct hci_dev *hdev,
 	return err;
 }
 
+static bool btintel_firmware_version(struct hci_dev *hdev,
+				     u8 num, u8 ww, u8 yy,
+				     const struct firmware *fw,
+				     u32 *boot_addr)
+{
+	const u8 *fw_ptr;
+	u32 frag_len;
+
+	fw_ptr = fw->data;
+	frag_len = 0;
+
+	while (fw_ptr - fw->data < fw->size) {
+		struct hci_command_hdr *cmd = (void *)(fw_ptr + frag_len);
+
+		/* Each SKU has a different reset parameter to use in the
+		 * HCI_Intel_Reset command and it is embedded in the firmware
+		 * data. So, instead of using static value per SKU, check
+		 * the firmware data and save it for later use.
+		 */
+		if (le16_to_cpu(cmd->opcode) == CMD_WRITE_BOOT_PARAMS) {
+			struct cmd_write_boot_params *params;
+
+			params = (void *)(fw_ptr + sizeof(*cmd));
+
+			bt_dev_info(hdev, "Boot Address: 0x%x",
+				   le32_to_cpu(params->boot_addr));
+
+			bt_dev_info(hdev, "Firmware Version: %u-%u.%u",
+				   params->fw_build_num, params->fw_build_ww,
+				   params->fw_build_yy);
+
+			return (num == params->fw_build_num &&
+				ww == params->fw_build_ww &&
+				yy == params->fw_build_yy);
+		}
+
+		frag_len += sizeof(*cmd) + cmd->plen;
+	}
+
+	return false;
+}
+
 int btintel_download_firmware(struct hci_dev *hdev,
+			      struct intel_version *ver,
 			      const struct firmware *fw,
 			      u32 *boot_param)
 {
 	int err;
 
+	/* Skip download if firmware has the same version */
+	if (btintel_firmware_version(hdev, ver->fw_build_num, ver->fw_build_ww,
+				     ver->fw_build_yy, fw, boot_param)) {
+		bt_dev_info(hdev, "Firmware already loaded");
+		/* Return -EALREADY to indicate that the firmware has already
+		 * been loaded.
+		 */
+		return -EALREADY;
+	}
+
 	err = btintel_sfi_rsa_header_secure_send(hdev, fw);
 	if (err)
 		return err;
 
-	return btintel_download_firmware_payload(hdev, fw, boot_param,
-						 RSA_HEADER_LEN);
+	return btintel_download_firmware_payload(hdev, fw, RSA_HEADER_LEN);
 }
 EXPORT_SYMBOL_GPL(btintel_download_firmware);
 
 int btintel_download_firmware_newgen(struct hci_dev *hdev,
+				     struct intel_version_tlv *ver,
 				     const struct firmware *fw, u32 *boot_param,
 				     u8 hw_variant, u8 sbe_type)
 {
 	int err;
 	u32 css_header_ver;
 
+	/* Skip download if firmware has the same version */
+	if (btintel_firmware_version(hdev, ver->min_fw_build_nn,
+				     ver->min_fw_build_cw, ver->min_fw_build_yy,
+				     fw, boot_param)) {
+		bt_dev_info(hdev, "Firmware already loaded");
+		/* Return -EALREADY to indicate that firmware has already been
+		 * loaded.
+		 */
+		return -EALREADY;
+	}
+
 	/* iBT hardware variants 0x0b, 0x0c, 0x11, 0x12, 0x13, 0x14 support
 	 * only RSA secure boot engine. Hence, the corresponding sfi file will
 	 * have RSA header of 644 bytes followed by Command Buffer.
@@ -947,7 +1005,7 @@ int btintel_download_firmware_newgen(struct hci_dev *hdev,
 		if (err)
 			return err;
 
-		err = btintel_download_firmware_payload(hdev, fw, boot_param, RSA_HEADER_LEN);
+		err = btintel_download_firmware_payload(hdev, fw, RSA_HEADER_LEN);
 		if (err)
 			return err;
 	} else if (hw_variant >= 0x17) {
@@ -968,7 +1026,6 @@ int btintel_download_firmware_newgen(struct hci_dev *hdev,
 				return err;
 
 			err = btintel_download_firmware_payload(hdev, fw,
-								boot_param,
 								RSA_HEADER_LEN + ECDSA_HEADER_LEN);
 			if (err)
 				return err;
@@ -978,7 +1035,6 @@ int btintel_download_firmware_newgen(struct hci_dev *hdev,
 				return err;
 
 			err = btintel_download_firmware_payload(hdev, fw,
-								boot_param,
 								RSA_HEADER_LEN + ECDSA_HEADER_LEN);
 			if (err)
 				return err;
diff --git a/drivers/bluetooth/btintel.h b/drivers/bluetooth/btintel.h
index 6511b091caf5..51f1f2c883b4 100644
--- a/drivers/bluetooth/btintel.h
+++ b/drivers/bluetooth/btintel.h
@@ -163,9 +163,10 @@ struct regmap *btintel_regmap_init(struct hci_dev *hdev, u16 opcode_read,
 int btintel_send_intel_reset(struct hci_dev *hdev, u32 boot_param);
 int btintel_read_boot_params(struct hci_dev *hdev,
 			     struct intel_boot_params *params);
-int btintel_download_firmware(struct hci_dev *dev, const struct firmware *fw,
-			      u32 *boot_param);
+int btintel_download_firmware(struct hci_dev *dev, struct intel_version *ver,
+			      const struct firmware *fw, u32 *boot_param);
 int btintel_download_firmware_newgen(struct hci_dev *hdev,
+				     struct intel_version_tlv *ver,
 				     const struct firmware *fw,
 				     u32 *boot_param, u8 hw_variant,
 				     u8 sbe_type);
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 66ada8217797..c92060e7472c 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2623,10 +2623,17 @@ static int btusb_intel_download_firmware_newgen(struct hci_dev *hdev,
 	set_bit(BTUSB_DOWNLOADING, &data->flags);
 
 	/* Start firmware downloading and get boot parameter */
-	err = btintel_download_firmware_newgen(hdev, fw, boot_param,
+	err = btintel_download_firmware_newgen(hdev, ver, fw, boot_param,
 					       INTEL_HW_VARIANT(ver->cnvi_bt),
 					       ver->sbe_type);
 	if (err < 0) {
+		if (err == -EALREADY) {
+			/* Firmware has already been loaded */
+			set_bit(BTUSB_FIRMWARE_LOADED, &data->flags);
+			err = 0;
+			goto done;
+		}
+
 		/* When FW download fails, send Intel Reset to retry
 		 * FW download.
 		 */
@@ -2817,8 +2824,15 @@ static int btusb_intel_download_firmware(struct hci_dev *hdev,
 	set_bit(BTUSB_DOWNLOADING, &data->flags);
 
 	/* Start firmware downloading and get boot parameter */
-	err = btintel_download_firmware(hdev, fw, boot_param);
+	err = btintel_download_firmware(hdev, ver, fw, boot_param);
 	if (err < 0) {
+		if (err == -EALREADY) {
+			/* Firmware has already been loaded */
+			set_bit(BTUSB_FIRMWARE_LOADED, &data->flags);
+			err = 0;
+			goto done;
+		}
+
 		/* When FW download fails, send Intel Reset to retry
 		 * FW download.
 		 */
diff --git a/drivers/bluetooth/hci_intel.c b/drivers/bluetooth/hci_intel.c
index b20a40fab83e..7249b91d9b91 100644
--- a/drivers/bluetooth/hci_intel.c
+++ b/drivers/bluetooth/hci_intel.c
@@ -735,7 +735,7 @@ static int intel_setup(struct hci_uart *hu)
 	set_bit(STATE_DOWNLOADING, &intel->flags);
 
 	/* Start firmware downloading and get boot parameter */
-	err = btintel_download_firmware(hdev, fw, &boot_param);
+	err = btintel_download_firmware(hdev, &ver, fw, &boot_param);
 	if (err < 0)
 		goto done;
 
@@ -784,7 +784,10 @@ static int intel_setup(struct hci_uart *hu)
 done:
 	release_firmware(fw);
 
-	if (err < 0)
+	/* Check if there was an error and if is not -EALREADY which means the
+	 * firmware has already been loaded.
+	 */
+	if (err < 0 && err != -EALREADY)
 		return err;
 
 	/* We need to restore the default speed before Intel reset */
-- 
2.26.2


             reply	other threads:[~2021-02-10 17:00 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-10 16:59 Luiz Augusto von Dentz [this message]
2021-02-10 16:59 ` [PATCH v4 2/6] Bluetooth: btintel: Move operational checks after version check Luiz Augusto von Dentz
2021-02-10 19:09   ` An, Tedd
2021-02-10 19:20     ` Luiz Augusto von Dentz
2021-02-10 20:25       ` An, Tedd
2021-02-10 16:59 ` [PATCH v4 3/6] Bluetooth: btintel: Consolidate intel_version_tlv parsing Luiz Augusto von Dentz
2021-02-10 16:59 ` [PATCH v4 4/6] Bluetooth: btintel: Consolidate intel_version parsing Luiz Augusto von Dentz
2021-02-10 16:59 ` [PATCH v4 5/6] Bluetooth: btusb: Consolidate code for waiting firmware download Luiz Augusto von Dentz
2021-02-10 16:59 ` [PATCH v4 6/6] Bluetooth: btusb: Consolidate code for waiting firmware to boot Luiz Augusto von Dentz
2021-02-10 17:33 ` [v4,1/6] Bluetooth: btintel: Check firmware version before download bluez.test.bot
2021-02-10 18:50 ` [PATCH v4 1/6] " Tedd Ho-Jeong An
2021-02-10 19:06   ` Luiz Augusto von Dentz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210210165916.2148856-1-luiz.dentz@gmail.com \
    --to=luiz.dentz@gmail.com \
    --cc=linux-bluetooth@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.