All of lore.kernel.org
 help / color / mirror / Atom feed
From: Geetha sowjanya <gakula@marvell.com>
To: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-crypto@vger.kernel.org>
Cc: <davem@davemloft.net>, <kuba@kernel.org>, <sgoutham@marvell.com>,
	<lcherian@marvell.com>, <hkelam@marvell.com>,
	<sbhatta@marvell.com>, <jerinj@marvell.com>,
	<bbrezillon@kernel.org>, <arno@natisbad.org>,
	<schalla@marvell.com>, Geetha sowjanya <gakula@marvell.com>
Subject: [net-next v6 14/14] octeontx2-af: cn10k: MAC internal loopback support
Date: Thu, 11 Feb 2021 21:28:34 +0530	[thread overview]
Message-ID: <20210211155834.31874-15-gakula@marvell.com> (raw)
In-Reply-To: <20210211155834.31874-1-gakula@marvell.com>

From: Hariprasad Kelam <hkelam@marvell.com>

MAC on CN10K silicon support loopback for selftest or debug purposes.
This patch does necessary configuration to loopback packets upon receiving
request from LMAC mapped RVU PF's netdev via mailbox.

Also MAC (CGX) on OcteonTx2 silicon variants and MAC (RPM) on
OcteonTx3 CN10K are different and loopback needs to be configured
differently. Upper layer interface between RVU AF and PF netdev is
kept same. Based on silicon variant appropriate fn() pointer is
called to config the MAC.

Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
---
 .../net/ethernet/marvell/octeontx2/af/cgx.c   |  7 ++-
 .../ethernet/marvell/octeontx2/af/cgx_fw_if.h |  1 +
 .../marvell/octeontx2/af/lmac_common.h        |  4 +-
 .../net/ethernet/marvell/octeontx2/af/rpm.c   | 44 +++++++++++++++++++
 .../net/ethernet/marvell/octeontx2/af/rpm.h   |  5 +++
 .../ethernet/marvell/octeontx2/af/rvu_cgx.c   |  6 +--
 6 files changed, 61 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/cgx.c b/drivers/net/ethernet/marvell/octeontx2/af/cgx.c
index 0368d762bcff..9caa375d01b1 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/cgx.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/cgx.c
@@ -229,8 +229,9 @@ int cgx_set_pkind(void *cgxd, u8 lmac_id, int pkind)
 	return 0;
 }
 
-static inline u8 cgx_get_lmac_type(struct cgx *cgx, int lmac_id)
+static u8 cgx_get_lmac_type(void *cgxd, int lmac_id)
 {
+	struct cgx *cgx = cgxd;
 	u64 cfg;
 
 	cfg = cgx_read(cgx, lmac_id, CGXX_CMRX_CFG);
@@ -247,7 +248,7 @@ int cgx_lmac_internal_loopback(void *cgxd, int lmac_id, bool enable)
 	if (!is_lmac_valid(cgx, lmac_id))
 		return -ENODEV;
 
-	lmac_type = cgx_get_lmac_type(cgx, lmac_id);
+	lmac_type = cgx->mac_ops->get_lmac_type(cgx, lmac_id);
 	if (lmac_type == LMAC_MODE_SGMII || lmac_type == LMAC_MODE_QSGMII) {
 		cfg = cgx_read(cgx, lmac_id, CGXX_GMP_PCS_MRX_CTL);
 		if (enable)
@@ -1302,6 +1303,8 @@ static struct mac_ops	cgx_mac_ops    = {
 	.rx_stats_cnt   =       9,
 	.tx_stats_cnt   =       18,
 	.get_nr_lmacs	=	cgx_get_nr_lmacs,
+	.get_lmac_type  =       cgx_get_lmac_type,
+	.mac_lmac_intl_lbk =    cgx_lmac_internal_loopback,
 	.mac_get_rx_stats  =	cgx_get_rx_stats,
 	.mac_get_tx_stats  =	cgx_get_tx_stats,
 	.mac_enadis_rx_pause_fwding =	cgx_lmac_enadis_rx_pause_fwding,
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/cgx_fw_if.h b/drivers/net/ethernet/marvell/octeontx2/af/cgx_fw_if.h
index dde2bd0bc936..aa4e42f78f13 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/cgx_fw_if.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/cgx_fw_if.h
@@ -204,6 +204,7 @@ enum cgx_cmd_own {
  * CGX_STAT_SUCCESS
  */
 #define RESP_FWD_BASE		GENMASK_ULL(56, 9)
+#define RESP_LINKSTAT_LMAC_TYPE                GENMASK_ULL(35, 28)
 
 /* Response to cmd ID - CGX_CMD_LINK_BRING_UP/DOWN, event ID CGX_EVT_LINK_CHANGE
  * status can be either CGX_STAT_FAIL or CGX_STAT_SUCCESS
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/lmac_common.h b/drivers/net/ethernet/marvell/octeontx2/af/lmac_common.h
index fea230393782..45706fd87120 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/lmac_common.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/lmac_common.h
@@ -70,7 +70,9 @@ struct mac_ops {
 	 * number of setbits in lmac_exist tells number of lmacs
 	 */
 	int			(*get_nr_lmacs)(void *cgx);
-
+	u8                      (*get_lmac_type)(void *cgx, int lmac_id);
+	int                     (*mac_lmac_intl_lbk)(void *cgx, int lmac_id,
+						     bool enable);
 	/* Register Stats related functions */
 	int			(*mac_get_rx_stats)(void *cgx, int lmac_id,
 						    int idx, u64 *rx_stat);
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rpm.c b/drivers/net/ethernet/marvell/octeontx2/af/rpm.c
index 3870cd436683..a91ccdc59403 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rpm.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rpm.c
@@ -21,6 +21,8 @@ static struct mac_ops	rpm_mac_ops   = {
 	.rx_stats_cnt   =       43,
 	.tx_stats_cnt   =       34,
 	.get_nr_lmacs	=	rpm_get_nr_lmacs,
+	.get_lmac_type  =       rpm_get_lmac_type,
+	.mac_lmac_intl_lbk =    rpm_lmac_internal_loopback,
 	.mac_get_rx_stats  =	rpm_get_rx_stats,
 	.mac_get_tx_stats  =	rpm_get_tx_stats,
 	.mac_enadis_rx_pause_fwding =	rpm_lmac_enadis_rx_pause_fwding,
@@ -226,3 +228,45 @@ int rpm_get_tx_stats(void *rpmd, int lmac_id, int idx, u64 *tx_stat)
 	mutex_unlock(&rpm->lock);
 	return 0;
 }
+
+u8 rpm_get_lmac_type(void *rpmd, int lmac_id)
+{
+	rpm_t *rpm = rpmd;
+	u64 req = 0, resp;
+	int err;
+
+	req = FIELD_SET(CMDREG_ID, CGX_CMD_GET_LINK_STS, req);
+	err = cgx_fwi_cmd_generic(req, &resp, rpm, 0);
+	if (!err)
+		return FIELD_GET(RESP_LINKSTAT_LMAC_TYPE, resp);
+	return err;
+}
+
+int rpm_lmac_internal_loopback(void *rpmd, int lmac_id, bool enable)
+{
+	rpm_t *rpm = rpmd;
+	u8 lmac_type;
+	u64 cfg;
+
+	if (!rpm || lmac_id >= rpm->lmac_count)
+		return -ENODEV;
+	lmac_type = rpm->mac_ops->get_lmac_type(rpm, lmac_id);
+	if (lmac_type == LMAC_MODE_100G_R) {
+		cfg = rpm_read(rpm, lmac_id, RPMX_MTI_PCS100X_CONTROL1);
+
+		if (enable)
+			cfg |= RPMX_MTI_PCS_LBK;
+		else
+			cfg &= ~RPMX_MTI_PCS_LBK;
+		rpm_write(rpm, lmac_id, RPMX_MTI_PCS100X_CONTROL1, cfg);
+	} else {
+		cfg = rpm_read(rpm, lmac_id, RPMX_MTI_LPCSX_CONTROL1);
+		if (enable)
+			cfg |= RPMX_MTI_PCS_LBK;
+		else
+			cfg &= ~RPMX_MTI_PCS_LBK;
+		rpm_write(rpm, lmac_id, RPMX_MTI_LPCSX_CONTROL1, cfg);
+	}
+
+	return 0;
+}
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rpm.h b/drivers/net/ethernet/marvell/octeontx2/af/rpm.h
index c939302308b5..d32e74bd5964 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rpm.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rpm.h
@@ -18,6 +18,9 @@
 #define RPMX_CMRX_SW_INT_W1S            0x188
 #define RPMX_CMRX_SW_INT_ENA_W1S        0x198
 #define RPMX_CMRX_LINK_CFG		0x1070
+#define RPMX_MTI_PCS100X_CONTROL1       0x20000
+#define RPMX_MTI_LPCSX_CONTROL1         0x30000
+#define RPMX_MTI_PCS_LBK                BIT_ULL(14)
 #define RPMX_MTI_LPCSX_CONTROL(id)     (0x30000 | ((id) * 0x100))
 
 #define RPMX_CMRX_LINK_RANGE_MASK	GENMASK_ULL(19, 16)
@@ -41,6 +44,8 @@
 
 /* Function Declarations */
 int rpm_get_nr_lmacs(void *rpmd);
+u8 rpm_get_lmac_type(void *rpmd, int lmac_id);
+int rpm_lmac_internal_loopback(void *rpmd, int lmac_id, bool enable);
 void rpm_lmac_enadis_rx_pause_fwding(void *rpmd, int lmac_id, bool enable);
 int rpm_lmac_get_pause_frm_status(void *cgxd, int lmac_id, u8 *tx_pause,
 				  u8 *rx_pause);
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c
index 0667ab3cfdae..3a1809c28e83 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c
@@ -722,15 +722,15 @@ u32 rvu_cgx_get_fifolen(struct rvu *rvu)
 
 static int rvu_cgx_config_intlbk(struct rvu *rvu, u16 pcifunc, bool en)
 {
-	int pf = rvu_get_pf(pcifunc);
+	struct mac_ops *mac_ops;
 	u8 cgx_id, lmac_id;
 
 	if (!is_cgx_config_permitted(rvu, pcifunc))
 		return -EPERM;
 
-	rvu_get_cgx_lmac_id(rvu->pf2cgxlmac_map[pf], &cgx_id, &lmac_id);
+	mac_ops = get_mac_ops(rvu_cgx_pdata(cgx_id, rvu));
 
-	return cgx_lmac_internal_loopback(rvu_cgx_pdata(cgx_id, rvu),
+	return mac_ops->mac_lmac_intl_lbk(rvu_cgx_pdata(cgx_id, rvu),
 					  lmac_id, en);
 }
 
-- 
2.17.1


  parent reply	other threads:[~2021-02-11 16:05 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-11 15:58 [net-next v6 00/14] Add Marvell CN10K support Geetha sowjanya
2021-02-11 15:58 ` [net-next v6 01/14] octeontx2-af: cn10k: Add mbox support for CN10K platform Geetha sowjanya
2021-02-11 15:58 ` [net-next v6 02/14] octeontx2-pf: cn10k: Add mbox support for CN10K Geetha sowjanya
2021-02-11 15:58 ` [net-next v6 03/14] octeontx2-af: cn10k: Update NIX/NPA context structure Geetha sowjanya
2021-02-11 15:58 ` [net-next v6 04/14] octeontx2-af: cn10k: Update NIX and NPA context in debugfs Geetha sowjanya
2021-02-11 15:58 ` [net-next v6 05/14] octeontx2-pf: cn10k: Initialise NIX context Geetha sowjanya
2021-02-11 15:58 ` [net-next v6 06/14] octeontx2-pf: cn10k: Map LMTST region Geetha sowjanya
2021-02-11 15:58 ` [net-next v6 07/14] octeontx2-pf: cn10k: Use LMTST lines for NPA/NIX operations Geetha sowjanya
2021-02-11 15:58 ` [net-next v6 08/14] octeontx2-af: cn10k: Add RPM MAC support Geetha sowjanya
2021-02-11 15:58 ` [net-next v6 09/14] octeontx2-af: cn10k: Add support for programmable channels Geetha sowjanya
2021-02-11 15:58 ` [net-next v6 10/14] octeontx2-af: cn10K: Add MTU configuration Geetha sowjanya
2021-02-11 15:58 ` [net-next v6 11/14] octeontx2-pf: cn10k: Get max mtu supported from admin function Geetha sowjanya
2021-02-11 15:58 ` [net-next v6 12/14] octeontx2-af: cn10k: Add RPM LMAC pause frame support Geetha sowjanya
2021-02-11 15:58 ` [net-next v6 13/14] octeontx2-af: cn10k: Add RPM Rx/Tx stats support Geetha sowjanya
2021-02-11 15:58 ` Geetha sowjanya [this message]
2021-02-11 19:10   ` [net-next v6 14/14] octeontx2-af: cn10k: MAC internal loopback support kernel test robot
2021-02-11 19:10     ` kernel test robot
2021-02-11 23:10 ` [net-next v6 00/14] Add Marvell CN10K support patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210211155834.31874-15-gakula@marvell.com \
    --to=gakula@marvell.com \
    --cc=arno@natisbad.org \
    --cc=bbrezillon@kernel.org \
    --cc=davem@davemloft.net \
    --cc=hkelam@marvell.com \
    --cc=jerinj@marvell.com \
    --cc=kuba@kernel.org \
    --cc=lcherian@marvell.com \
    --cc=linux-crypto@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=sbhatta@marvell.com \
    --cc=schalla@marvell.com \
    --cc=sgoutham@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.