All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Kishon Vijay Abraham I <kishon@ti.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Rob Herring <robh+dt@kernel.org>,
	Tom Joseph <tjoseph@cadence.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: <linux-pci@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>
Subject: [PATCH v3 4/4] PCI: j721e: Add support to provide refclk to PCIe connector
Date: Mon, 22 Feb 2021 17:10:30 +0530	[thread overview]
Message-ID: <20210222114030.26445-5-kishon@ti.com> (raw)
In-Reply-To: <20210222114030.26445-1-kishon@ti.com>

Add support to provide refclk to PCIe connector.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/pci/controller/cadence/pci-j721e.c | 21 ++++++++++++++++++++-
 1 file changed, 20 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
index dac1ac8a7615..f99af98ab7d1 100644
--- a/drivers/pci/controller/cadence/pci-j721e.c
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -6,6 +6,7 @@
  * Author: Kishon Vijay Abraham I <kishon@ti.com>
  */
 
+#include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/gpio/consumer.h>
 #include <linux/io.h>
@@ -50,6 +51,7 @@ enum link_status {
 
 struct j721e_pcie {
 	struct device		*dev;
+	struct clk		*refclk;
 	u32			mode;
 	u32			num_lanes;
 	struct cdns_pcie	*cdns_pcie;
@@ -310,6 +312,7 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 	struct cdns_pcie_ep *ep;
 	struct gpio_desc *gpiod;
 	void __iomem *base;
+	struct clk *clk;
 	u32 num_lanes;
 	u32 mode;
 	int ret;
@@ -408,6 +411,19 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 			goto err_get_sync;
 		}
 
+		clk = devm_clk_get_optional(dev, "pcie_refclk");
+		if (IS_ERR(clk)) {
+			dev_err(dev, "failed to get pcie_refclk\n");
+			goto err_pcie_setup;
+		}
+
+		ret = clk_prepare_enable(clk);
+		if (ret) {
+			dev_err(dev, "failed to enable pcie_refclk\n");
+			goto err_get_sync;
+		}
+		pcie->refclk = clk;
+
 		/*
 		 * "Power Sequencing and Reset Signal Timings" table in
 		 * PCI EXPRESS CARD ELECTROMECHANICAL SPECIFICATION, REV. 3.0
@@ -422,8 +438,10 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 		}
 
 		ret = cdns_pcie_host_setup(rc);
-		if (ret < 0)
+		if (ret < 0) {
+			clk_disable_unprepare(pcie->refclk);
 			goto err_pcie_setup;
+		}
 
 		break;
 	case PCI_MODE_EP:
@@ -476,6 +494,7 @@ static int j721e_pcie_remove(struct platform_device *pdev)
 	struct cdns_pcie *cdns_pcie = pcie->cdns_pcie;
 	struct device *dev = &pdev->dev;
 
+	clk_disable_unprepare(pcie->refclk);
 	cdns_pcie_disable_phy(cdns_pcie);
 	pm_runtime_put(dev);
 	pm_runtime_disable(dev);
-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Kishon Vijay Abraham I <kishon@ti.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Rob Herring <robh+dt@kernel.org>,
	Tom Joseph <tjoseph@cadence.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Subject: [PATCH v3 4/4] PCI: j721e: Add support to provide refclk to PCIe connector
Date: Mon, 22 Feb 2021 17:10:30 +0530	[thread overview]
Message-ID: <20210222114030.26445-5-kishon@ti.com> (raw)
In-Reply-To: <20210222114030.26445-1-kishon@ti.com>

Add support to provide refclk to PCIe connector.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/pci/controller/cadence/pci-j721e.c | 21 ++++++++++++++++++++-
 1 file changed, 20 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
index dac1ac8a7615..f99af98ab7d1 100644
--- a/drivers/pci/controller/cadence/pci-j721e.c
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -6,6 +6,7 @@
  * Author: Kishon Vijay Abraham I <kishon@ti.com>
  */
 
+#include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/gpio/consumer.h>
 #include <linux/io.h>
@@ -50,6 +51,7 @@ enum link_status {
 
 struct j721e_pcie {
 	struct device		*dev;
+	struct clk		*refclk;
 	u32			mode;
 	u32			num_lanes;
 	struct cdns_pcie	*cdns_pcie;
@@ -310,6 +312,7 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 	struct cdns_pcie_ep *ep;
 	struct gpio_desc *gpiod;
 	void __iomem *base;
+	struct clk *clk;
 	u32 num_lanes;
 	u32 mode;
 	int ret;
@@ -408,6 +411,19 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 			goto err_get_sync;
 		}
 
+		clk = devm_clk_get_optional(dev, "pcie_refclk");
+		if (IS_ERR(clk)) {
+			dev_err(dev, "failed to get pcie_refclk\n");
+			goto err_pcie_setup;
+		}
+
+		ret = clk_prepare_enable(clk);
+		if (ret) {
+			dev_err(dev, "failed to enable pcie_refclk\n");
+			goto err_get_sync;
+		}
+		pcie->refclk = clk;
+
 		/*
 		 * "Power Sequencing and Reset Signal Timings" table in
 		 * PCI EXPRESS CARD ELECTROMECHANICAL SPECIFICATION, REV. 3.0
@@ -422,8 +438,10 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 		}
 
 		ret = cdns_pcie_host_setup(rc);
-		if (ret < 0)
+		if (ret < 0) {
+			clk_disable_unprepare(pcie->refclk);
 			goto err_pcie_setup;
+		}
 
 		break;
 	case PCI_MODE_EP:
@@ -476,6 +494,7 @@ static int j721e_pcie_remove(struct platform_device *pdev)
 	struct cdns_pcie *cdns_pcie = pcie->cdns_pcie;
 	struct device *dev = &pdev->dev;
 
+	clk_disable_unprepare(pcie->refclk);
 	cdns_pcie_disable_phy(cdns_pcie);
 	pm_runtime_put(dev);
 	pm_runtime_disable(dev);
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2021-02-22 11:43 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-22 11:40 [PATCH v3 0/4] AM64: Add PCIe bindings and driver support Kishon Vijay Abraham I
2021-02-22 11:40 ` Kishon Vijay Abraham I
2021-02-22 11:40 ` [PATCH v3 1/4] dt-bindings: PCI: ti,j721e: Add binding to represent refclk to the connector Kishon Vijay Abraham I
2021-02-22 11:40   ` [PATCH v3 1/4] dt-bindings: PCI: ti, j721e: " Kishon Vijay Abraham I
2021-02-22 17:29   ` [PATCH v3 1/4] dt-bindings: PCI: ti,j721e: " Krzysztof Wilczyński
2021-02-22 17:29     ` Krzysztof Wilczyński
2021-02-22 11:40 ` [PATCH v3 2/4] dt-bindings: PCI: ti,j721e: Add host mode dt-bindings for TI's AM64 SoC Kishon Vijay Abraham I
2021-02-22 11:40   ` [PATCH v3 2/4] dt-bindings: PCI: ti, j721e: " Kishon Vijay Abraham I
2021-03-05 23:28   ` Rob Herring
2021-03-05 23:28     ` Rob Herring
2021-02-22 11:40 ` [PATCH v3 3/4] dt-bindings: PCI: ti,j721e: Add endpoint " Kishon Vijay Abraham I
2021-02-22 11:40   ` [PATCH v3 3/4] dt-bindings: PCI: ti, j721e: " Kishon Vijay Abraham I
2021-03-05 23:29   ` Rob Herring
2021-03-05 23:29     ` Rob Herring
2021-02-22 11:40 ` Kishon Vijay Abraham I [this message]
2021-02-22 11:40   ` [PATCH v3 4/4] PCI: j721e: Add support to provide refclk to PCIe connector Kishon Vijay Abraham I
2021-02-23  7:50   ` Dan Carpenter
2021-02-23  7:50     ` Dan Carpenter
2021-02-23  7:50     ` Dan Carpenter
2021-02-23  7:50     ` Dan Carpenter
2021-02-22 17:17 kernel test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210222114030.26445-5-kishon@ti.com \
    --to=kishon@ti.com \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=tjoseph@cadence.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.