From: Adrien Grassein <adrien.grassein@gmail.com> To: unlisted-recipients:; (no To-header on input) Cc: robert.foss@linaro.org, airlied@linux.ie, daniel@ffwll.ch, a.hajda@samsung.com, robh+dt@kernel.org, narmstrong@baylibre.com, Laurent.pinchart@ideasonboard.com, jonas@kwiboo.se, jernej.skrabec@siol.net, dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Adrien Grassein <adrien.grassein@gmail.com>, Rob Herring <robh@kernel.org> Subject: [PATCH v4 1/2] dt-bindings: display: bridge: Add documentation for LT8912 Date: Tue, 23 Feb 2021 18:56:06 +0100 [thread overview] Message-ID: <20210223175607.431796-2-adrien.grassein@gmail.com> (raw) In-Reply-To: <20210223175607.431796-1-adrien.grassein@gmail.com> Lontium LT8912 is a DSI to HDMI bridge. Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> --- .../display/bridge/lontium,lt8912.yaml | 102 ++++++++++++++++++ MAINTAINERS | 5 + 2 files changed, 107 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/lontium,lt8912.yaml diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt8912.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt8912.yaml new file mode 100644 index 000000000000..1e5a2ad5eb47 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt8912.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/lontium,lt8912.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lontium LT8912 MIPI to HDMI Bridge + +maintainers: + - Adrien Grassein <adrien.grassein@gmail.com> + +description: | + The LT8912 is a bridge device which convert DSI to HDMI + +properties: + compatible: + enum: + - lontium,lt8912 + + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: GPIO connected to active high RESET pin. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Primary MIPI port for MIPI input + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: true + + required: + - data-lanes + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: | + HDMI port, should be connected to a node compatible with the + hdmi-connector binding. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - reset-gpios + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c4 { + #address-cells = <1>; + #size-cells = <0>; + + hdmi-bridge@48 { + compatible = "lontium,lt8912"; + reg = <0x48>; + reset-gpios = <&max7323 0 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hdmi_out_in: endpoint { + data-lanes = <0 1 2 3>; + remote-endpoint = <&mipi_dsi_out>; + }; + }; + + port@1 { + reg = <1>; + + endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + }; + }; + }; + +... diff --git a/MAINTAINERS b/MAINTAINERS index 16ada1a4b751..1e4d49f9dfea 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -10460,6 +10460,11 @@ S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid.git F: drivers/hid/hid-lg-g15.c +LONTIUM LT8912 MIPI TO HDMI BRIDGE +M: Adrien Grassein <adrien.grassein@gmail.com> +S: Maintained +F: Documentation/devicetree/bindings/display/bridge/lontium,lt8912.yaml + LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI) M: Sathya Prakash <sathya.prakash@broadcom.com> M: Sreekanth Reddy <sreekanth.reddy@broadcom.com> -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Adrien Grassein <adrien.grassein@gmail.com> Cc: devicetree@vger.kernel.org, jernej.skrabec@siol.net, narmstrong@baylibre.com, airlied@linux.ie, dri-devel@lists.freedesktop.org, jonas@kwiboo.se, linux-kernel@vger.kernel.org, robert.foss@linaro.org, a.hajda@samsung.com, robh+dt@kernel.org, Laurent.pinchart@ideasonboard.com, Adrien Grassein <adrien.grassein@gmail.com> Subject: [PATCH v4 1/2] dt-bindings: display: bridge: Add documentation for LT8912 Date: Tue, 23 Feb 2021 18:56:06 +0100 [thread overview] Message-ID: <20210223175607.431796-2-adrien.grassein@gmail.com> (raw) In-Reply-To: <20210223175607.431796-1-adrien.grassein@gmail.com> Lontium LT8912 is a DSI to HDMI bridge. Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> --- .../display/bridge/lontium,lt8912.yaml | 102 ++++++++++++++++++ MAINTAINERS | 5 + 2 files changed, 107 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/lontium,lt8912.yaml diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt8912.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt8912.yaml new file mode 100644 index 000000000000..1e5a2ad5eb47 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt8912.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/lontium,lt8912.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lontium LT8912 MIPI to HDMI Bridge + +maintainers: + - Adrien Grassein <adrien.grassein@gmail.com> + +description: | + The LT8912 is a bridge device which convert DSI to HDMI + +properties: + compatible: + enum: + - lontium,lt8912 + + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: GPIO connected to active high RESET pin. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Primary MIPI port for MIPI input + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: true + + required: + - data-lanes + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: | + HDMI port, should be connected to a node compatible with the + hdmi-connector binding. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - reset-gpios + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c4 { + #address-cells = <1>; + #size-cells = <0>; + + hdmi-bridge@48 { + compatible = "lontium,lt8912"; + reg = <0x48>; + reset-gpios = <&max7323 0 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hdmi_out_in: endpoint { + data-lanes = <0 1 2 3>; + remote-endpoint = <&mipi_dsi_out>; + }; + }; + + port@1 { + reg = <1>; + + endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + }; + }; + }; + +... diff --git a/MAINTAINERS b/MAINTAINERS index 16ada1a4b751..1e4d49f9dfea 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -10460,6 +10460,11 @@ S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid.git F: drivers/hid/hid-lg-g15.c +LONTIUM LT8912 MIPI TO HDMI BRIDGE +M: Adrien Grassein <adrien.grassein@gmail.com> +S: Maintained +F: Documentation/devicetree/bindings/display/bridge/lontium,lt8912.yaml + LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI) M: Sathya Prakash <sathya.prakash@broadcom.com> M: Sreekanth Reddy <sreekanth.reddy@broadcom.com> -- 2.25.1 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2021-02-23 17:58 UTC|newest] Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-02-23 17:56 [PATCH v4 0/2] Add support of Lontium lt8912 MIPI to HDMI bridge Adrien Grassein 2021-02-23 17:56 ` Adrien Grassein 2021-02-23 17:56 ` Adrien Grassein [this message] 2021-02-23 17:56 ` [PATCH v4 1/2] dt-bindings: display: bridge: Add documentation for LT8912 Adrien Grassein 2021-02-23 17:56 ` [PATCH v4 2/2] drm/bridge: Introduce LT8912 DSI to HDMI bridge Adrien Grassein 2021-02-23 17:56 ` Adrien Grassein 2021-02-24 9:41 ` Robert Foss 2021-02-24 9:41 ` Robert Foss
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210223175607.431796-2-adrien.grassein@gmail.com \ --to=adrien.grassein@gmail.com \ --cc=Laurent.pinchart@ideasonboard.com \ --cc=a.hajda@samsung.com \ --cc=airlied@linux.ie \ --cc=daniel@ffwll.ch \ --cc=devicetree@vger.kernel.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=jernej.skrabec@siol.net \ --cc=jonas@kwiboo.se \ --cc=linux-kernel@vger.kernel.org \ --cc=narmstrong@baylibre.com \ --cc=robert.foss@linaro.org \ --cc=robh+dt@kernel.org \ --cc=robh@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.