From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> To: Rob Clark <robdclark@gmail.com>, Sean Paul <sean@poorly.run> Cc: linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org, freedreno@lists.freedesktop.org Subject: [PATCH] drm/msm/dsi_pll_7nm: Fix variable usage for pll_lockdet_rate Date: Thu, 25 Feb 2021 02:05:28 +0300 [thread overview] Message-ID: <20210224230528.1216677-1-dmitry.baryshkov@linaro.org> (raw) The PLL_LOCKDET_RATE_1 was being programmed with a hardcoded value directly, but the same value was also being specified in the dsi_pll_regs struct pll_lockdet_rate variable: let's use it! Based on 362cadf34b9f ("drm/msm/dsi_pll_10nm: Fix variable usage for pll_lockdet_rate") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c index 0458eda15114..e29b3bfd63d1 100644 --- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c +++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c @@ -325,7 +325,7 @@ static void dsi_pll_commit(struct dsi_pll_7nm *pll) pll_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_LOW_1, reg->frac_div_start_low); pll_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_MID_1, reg->frac_div_start_mid); pll_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_HIGH_1, reg->frac_div_start_high); - pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_LOCKDET_RATE_1, 0x40); + pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_LOCKDET_RATE_1, reg->pll_lockdet_rate); pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_LOCK_DELAY, 0x06); pll_write(base + REG_DSI_7nm_PHY_PLL_CMODE_1, 0x10); /* TODO: 0x00 for CPHY */ pll_write(base + REG_DSI_7nm_PHY_PLL_CLOCK_INVERTERS, reg->pll_clock_inverters); -- 2.30.0
WARNING: multiple messages have this Message-ID (diff)
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> To: Rob Clark <robdclark@gmail.com>, Sean Paul <sean@poorly.run> Cc: linux-arm-msm@vger.kernel.org, freedreno@lists.freedesktop.org, dri-devel@lists.freedesktop.org Subject: [PATCH] drm/msm/dsi_pll_7nm: Fix variable usage for pll_lockdet_rate Date: Thu, 25 Feb 2021 02:05:28 +0300 [thread overview] Message-ID: <20210224230528.1216677-1-dmitry.baryshkov@linaro.org> (raw) The PLL_LOCKDET_RATE_1 was being programmed with a hardcoded value directly, but the same value was also being specified in the dsi_pll_regs struct pll_lockdet_rate variable: let's use it! Based on 362cadf34b9f ("drm/msm/dsi_pll_10nm: Fix variable usage for pll_lockdet_rate") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c index 0458eda15114..e29b3bfd63d1 100644 --- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c +++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_7nm.c @@ -325,7 +325,7 @@ static void dsi_pll_commit(struct dsi_pll_7nm *pll) pll_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_LOW_1, reg->frac_div_start_low); pll_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_MID_1, reg->frac_div_start_mid); pll_write(base + REG_DSI_7nm_PHY_PLL_FRAC_DIV_START_HIGH_1, reg->frac_div_start_high); - pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_LOCKDET_RATE_1, 0x40); + pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_LOCKDET_RATE_1, reg->pll_lockdet_rate); pll_write(base + REG_DSI_7nm_PHY_PLL_PLL_LOCK_DELAY, 0x06); pll_write(base + REG_DSI_7nm_PHY_PLL_CMODE_1, 0x10); /* TODO: 0x00 for CPHY */ pll_write(base + REG_DSI_7nm_PHY_PLL_CLOCK_INVERTERS, reg->pll_clock_inverters); -- 2.30.0 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
next reply other threads:[~2021-02-24 23:06 UTC|newest] Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-02-24 23:05 Dmitry Baryshkov [this message] 2021-02-24 23:05 ` [PATCH] drm/msm/dsi_pll_7nm: Fix variable usage for pll_lockdet_rate Dmitry Baryshkov 2021-02-25 7:26 ` [Freedreno] " abhinavk 2021-02-25 7:26 ` abhinavk 2021-05-26 19:03 ` patchwork-bot+linux-arm-msm
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210224230528.1216677-1-dmitry.baryshkov@linaro.org \ --to=dmitry.baryshkov@linaro.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=freedreno@lists.freedesktop.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=robdclark@gmail.com \ --cc=sean@poorly.run \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.