All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sean Christopherson <seanjc@google.com>
To: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>,
	Vitaly Kuznetsov <vkuznets@redhat.com>,
	Wanpeng Li <wanpengli@tencent.com>,
	Jim Mattson <jmattson@google.com>, Joerg Roedel <joro@8bytes.org>,
	kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
	Ben Gardon <bgardon@google.com>
Subject: [PATCH 08/24] KVM: x86/mmu: Drop redundant trace_kvm_mmu_set_spte() in the TDP MMU
Date: Thu, 25 Feb 2021 12:47:33 -0800	[thread overview]
Message-ID: <20210225204749.1512652-9-seanjc@google.com> (raw)
In-Reply-To: <20210225204749.1512652-1-seanjc@google.com>

Remove TDP MMU's call to trace_kvm_mmu_set_spte() that is done for both
shadow-present SPTEs and MMIO SPTEs.  It's fully redundant for the
former, and unnecessary for the latter.  This aligns TDP MMU tracing
behavior with that of the legacy MMU.

Fixes: 33dd3574f5fe ("kvm: x86/mmu: Add existing trace points to TDP MMU")
Cc: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
---
 arch/x86/kvm/mmu/tdp_mmu.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/arch/x86/kvm/mmu/tdp_mmu.c b/arch/x86/kvm/mmu/tdp_mmu.c
index f46972892a2d..782cae1eb5e1 100644
--- a/arch/x86/kvm/mmu/tdp_mmu.c
+++ b/arch/x86/kvm/mmu/tdp_mmu.c
@@ -773,12 +773,11 @@ static int tdp_mmu_map_handle_target_level(struct kvm_vcpu *vcpu, int write,
 		trace_mark_mmio_spte(rcu_dereference(iter->sptep), iter->gfn,
 				     new_spte);
 		ret = RET_PF_EMULATE;
-	} else
+	} else {
 		trace_kvm_mmu_set_spte(iter->level, iter->gfn,
 				       rcu_dereference(iter->sptep));
+	}
 
-	trace_kvm_mmu_set_spte(iter->level, iter->gfn,
-			       rcu_dereference(iter->sptep));
 	if (!prefault)
 		vcpu->stat.pf_fixed++;
 
-- 
2.30.1.766.gb4fecdf3b7-goog


  parent reply	other threads:[~2021-02-25 20:58 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-25 20:47 [PATCH 00/24] KVM: x86/mmu: Introduce MMU_PRESENT and fix bugs Sean Christopherson
2021-02-25 20:47 ` [PATCH 01/24] KVM: x86/mmu: Set SPTE_AD_WRPROT_ONLY_MASK if and only if PML is enabled Sean Christopherson
2021-02-25 20:47 ` [PATCH 02/24] KVM: x86/mmu: Check for shadow-present SPTE before querying A/D status Sean Christopherson
2021-02-25 20:47 ` [PATCH 03/24] KVM: x86/mmu: Bail from fast_page_fault() if SPTE is not shadow-present Sean Christopherson
2021-02-25 20:47 ` [PATCH 04/24] KVM: x86/mmu: Disable MMIO caching if MMIO value collides with L1TF Sean Christopherson
2021-02-25 20:47 ` [PATCH 05/24] KVM: x86/mmu: Retry page faults that hit an invalid memslot Sean Christopherson
2021-02-25 20:47 ` [PATCH 06/24] KVM: x86/mmu: Don't install bogus MMIO SPTEs if MMIO caching is disabled Sean Christopherson
2021-02-25 20:47 ` [PATCH 07/24] KVM: x86/mmu: Handle MMIO SPTEs directly in mmu_set_spte() Sean Christopherson
2021-02-25 20:47 ` Sean Christopherson [this message]
2021-02-25 20:47 ` [PATCH 09/24] KVM: x86/mmu: Rename 'mask' to 'spte' in MMIO SPTE helpers Sean Christopherson
2021-02-25 20:47 ` [PATCH 10/24] KVM: x86/mmu: Stop using software available bits to denote MMIO SPTEs Sean Christopherson
2021-02-25 20:47 ` [PATCH 11/24] KVM: x86/mmu: Add module param to disable MMIO caching (for testing) Sean Christopherson
2021-02-25 20:47 ` [PATCH 12/24] KVM: x86/mmu: Rename and document A/D scheme for TDP SPTEs Sean Christopherson
2021-02-25 20:47 ` [PATCH 13/24] KVM: x86/mmu: Use MMIO SPTE bits 53 and 52 for the MMIO generation Sean Christopherson
2021-02-25 20:47 ` [PATCH 14/24] KVM: x86/mmu: Document dependency bewteen TDP A/D type and saved bits Sean Christopherson
2021-02-25 20:47 ` [PATCH 15/24] KVM: x86/mmu: Move initial kvm_mmu_set_mask_ptes() call into MMU proper Sean Christopherson
2021-02-25 20:47 ` [PATCH 16/24] KVM: x86/mmu: Co-locate code for setting various SPTE masks Sean Christopherson
2021-02-25 20:47 ` [PATCH 17/24] KVM: x86/mmu: Move logic for setting SPTE masks for EPT into the MMU proper Sean Christopherson
2021-02-25 20:47 ` [PATCH 18/24] KVM: x86/mmu: Make Host-writable and MMU-writable bit locations dynamic Sean Christopherson
2021-02-25 20:47 ` [PATCH 19/24] KVM: x86/mmu: Use high bits for host/mmu writable masks for EPT SPTEs Sean Christopherson
2021-02-25 20:47 ` [PATCH 20/24] KVM: x86/mmu: Use a dedicated bit to track shadow/MMU-present SPTEs Sean Christopherson
2021-03-08 18:52   ` Tom Lendacky
2021-03-08 19:48     ` Paolo Bonzini
2021-03-08 20:11     ` Sean Christopherson
2021-03-08 21:49       ` Sean Christopherson
2021-02-25 20:47 ` [PATCH 21/24] KVM: x86/mmu: Tweak auditing WARN for A/D bits to !PRESENT (was MMIO) Sean Christopherson
2021-05-06 23:05   ` Matteo Croce
2021-05-07  7:38     ` Paolo Bonzini
2021-02-25 20:47 ` [PATCH 22/24] KVM: x86/mmu: Use is_removed_spte() instead of open coded equivalents Sean Christopherson
2021-02-25 20:47 ` [PATCH 23/24] KVM: x86/mmu: Use low available bits for removed SPTEs Sean Christopherson
2021-02-25 20:47 ` [PATCH 24/24] KVM: x86/mmu: Dump reserved bits if they're detected on non-MMIO SPTE Sean Christopherson
2021-02-26  9:38 ` [PATCH 00/24] KVM: x86/mmu: Introduce MMU_PRESENT and fix bugs Paolo Bonzini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210225204749.1512652-9-seanjc@google.com \
    --to=seanjc@google.com \
    --cc=bgardon@google.com \
    --cc=jmattson@google.com \
    --cc=joro@8bytes.org \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pbonzini@redhat.com \
    --cc=vkuznets@redhat.com \
    --cc=wanpengli@tencent.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.