From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> To: vkoul@kernel.org Cc: yung-chuan.liao@linux.intel.com, pierre-louis.bossart@linux.intel.com, sanyog.r.kale@intel.com, linux-kernel@vger.kernel.org, alsa-devel@alsa-project.org, Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Subject: [PATCH v2 2/5] soundwire: qcom: set continue execution flag for ignored commands Date: Fri, 26 Feb 2021 15:58:11 +0000 [thread overview] Message-ID: <20210226155814.27536-3-srinivas.kandagatla@linaro.org> (raw) In-Reply-To: <20210226155814.27536-1-srinivas.kandagatla@linaro.org> version 1.5.1 and higher IPs of this controller required to set continue execution on ignored command flag. This patch sets this flag. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> --- drivers/soundwire/qcom.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c index fee7465c72c2..14d91b17a2ca 100644 --- a/drivers/soundwire/qcom.c +++ b/drivers/soundwire/qcom.c @@ -40,6 +40,7 @@ #define SWRM_CMD_FIFO_CMD 0x308 #define SWRM_CMD_FIFO_STATUS 0x30C #define SWRM_CMD_FIFO_CFG_ADDR 0x314 +#define SWRM_CONTINUE_EXEC_ON_CMD_IGNORE BIT(31) #define SWRM_RD_WR_CMD_RETRIES 0x7 #define SWRM_CMD_FIFO_RD_FIFO_ADDR 0x318 #define SWRM_ENUMERATOR_CFG_ADDR 0x500 @@ -343,7 +344,15 @@ static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl) ctrl->reg_write(ctrl, SWRM_MCP_CFG_ADDR, val); /* Configure number of retries of a read/write cmd */ - ctrl->reg_write(ctrl, SWRM_CMD_FIFO_CFG_ADDR, SWRM_RD_WR_CMD_RETRIES); + if (ctrl->version > 0x01050001) { + /* Only for versions >= 1.5.1 */ + ctrl->reg_write(ctrl, SWRM_CMD_FIFO_CFG_ADDR, + SWRM_RD_WR_CMD_RETRIES | + SWRM_CONTINUE_EXEC_ON_CMD_IGNORE); + } else { + ctrl->reg_write(ctrl, SWRM_CMD_FIFO_CFG_ADDR, + SWRM_RD_WR_CMD_RETRIES); + } /* Set IRQ to PULSE */ ctrl->reg_write(ctrl, SWRM_COMP_CFG_ADDR, -- 2.21.0
WARNING: multiple messages have this Message-ID (diff)
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> To: vkoul@kernel.org Cc: alsa-devel@alsa-project.org, pierre-louis.bossart@linux.intel.com, linux-kernel@vger.kernel.org, Srinivas Kandagatla <srinivas.kandagatla@linaro.org>, sanyog.r.kale@intel.com, yung-chuan.liao@linux.intel.com Subject: [PATCH v2 2/5] soundwire: qcom: set continue execution flag for ignored commands Date: Fri, 26 Feb 2021 15:58:11 +0000 [thread overview] Message-ID: <20210226155814.27536-3-srinivas.kandagatla@linaro.org> (raw) In-Reply-To: <20210226155814.27536-1-srinivas.kandagatla@linaro.org> version 1.5.1 and higher IPs of this controller required to set continue execution on ignored command flag. This patch sets this flag. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> --- drivers/soundwire/qcom.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c index fee7465c72c2..14d91b17a2ca 100644 --- a/drivers/soundwire/qcom.c +++ b/drivers/soundwire/qcom.c @@ -40,6 +40,7 @@ #define SWRM_CMD_FIFO_CMD 0x308 #define SWRM_CMD_FIFO_STATUS 0x30C #define SWRM_CMD_FIFO_CFG_ADDR 0x314 +#define SWRM_CONTINUE_EXEC_ON_CMD_IGNORE BIT(31) #define SWRM_RD_WR_CMD_RETRIES 0x7 #define SWRM_CMD_FIFO_RD_FIFO_ADDR 0x318 #define SWRM_ENUMERATOR_CFG_ADDR 0x500 @@ -343,7 +344,15 @@ static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl) ctrl->reg_write(ctrl, SWRM_MCP_CFG_ADDR, val); /* Configure number of retries of a read/write cmd */ - ctrl->reg_write(ctrl, SWRM_CMD_FIFO_CFG_ADDR, SWRM_RD_WR_CMD_RETRIES); + if (ctrl->version > 0x01050001) { + /* Only for versions >= 1.5.1 */ + ctrl->reg_write(ctrl, SWRM_CMD_FIFO_CFG_ADDR, + SWRM_RD_WR_CMD_RETRIES | + SWRM_CONTINUE_EXEC_ON_CMD_IGNORE); + } else { + ctrl->reg_write(ctrl, SWRM_CMD_FIFO_CFG_ADDR, + SWRM_RD_WR_CMD_RETRIES); + } /* Set IRQ to PULSE */ ctrl->reg_write(ctrl, SWRM_COMP_CFG_ADDR, -- 2.21.0
next prev parent reply other threads:[~2021-02-26 15:59 UTC|newest] Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-02-26 15:58 [PATCH v2 0/5] soundwire: qcom: various improvements Srinivas Kandagatla 2021-02-26 15:58 ` Srinivas Kandagatla 2021-02-26 15:58 ` [PATCH v2 1/5] soundwire: qcom: add support to missing transport params Srinivas Kandagatla 2021-02-26 15:58 ` Srinivas Kandagatla 2021-02-26 16:45 ` Pierre-Louis Bossart 2021-02-26 16:45 ` Pierre-Louis Bossart 2021-03-02 10:13 ` Srinivas Kandagatla 2021-03-02 10:13 ` Srinivas Kandagatla 2021-03-02 14:29 ` Pierre-Louis Bossart 2021-03-03 9:36 ` Srinivas Kandagatla 2021-03-03 16:16 ` Pierre-Louis Bossart 2021-02-26 15:58 ` Srinivas Kandagatla [this message] 2021-02-26 15:58 ` [PATCH v2 2/5] soundwire: qcom: set continue execution flag for ignored commands Srinivas Kandagatla 2021-02-26 15:58 ` [PATCH v2 3/5] soundwire: qcom: start the clock during initialization Srinivas Kandagatla 2021-02-26 15:58 ` Srinivas Kandagatla 2021-02-26 15:58 ` [PATCH v2 4/5] soundwire: qcom: update register read/write routine Srinivas Kandagatla 2021-02-26 15:58 ` Srinivas Kandagatla 2021-02-26 15:58 ` [PATCH v2 5/5] soundwire: qcom: add support to new interrupts Srinivas Kandagatla 2021-02-26 15:58 ` Srinivas Kandagatla
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210226155814.27536-3-srinivas.kandagatla@linaro.org \ --to=srinivas.kandagatla@linaro.org \ --cc=alsa-devel@alsa-project.org \ --cc=linux-kernel@vger.kernel.org \ --cc=pierre-louis.bossart@linux.intel.com \ --cc=sanyog.r.kale@intel.com \ --cc=vkoul@kernel.org \ --cc=yung-chuan.liao@linux.intel.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.