From: Adrien Grassein <adrien.grassein@gmail.com> To: unlisted-recipients:; (no To-header on input) Cc: robert.foss@linaro.org, airlied@linux.ie, daniel@ffwll.ch, a.hajda@samsung.com, robh+dt@kernel.org, narmstrong@baylibre.com, Laurent.pinchart@ideasonboard.com, jonas@kwiboo.se, jernej.skrabec@siol.net, dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Adrien Grassein <adrien.grassein@gmail.com>, Rob Herring <robh@kernel.org> Subject: [PATCH v5 1/2] dt-bindings: display: bridge: Add documentation for LT8912B Date: Sat, 27 Feb 2021 17:12:27 +0100 [thread overview] Message-ID: <20210227161228.1632521-2-adrien.grassein@gmail.com> (raw) In-Reply-To: <20210227161228.1632521-1-adrien.grassein@gmail.com> Lontium LT8912B is a DSI to HDMI bridge. Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> --- .../display/bridge/lontium,lt8912b.yaml | 102 ++++++++++++++++++ MAINTAINERS | 5 + 2 files changed, 107 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml new file mode 100644 index 000000000000..735d0233a7d6 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/lontium,lt8912b.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lontium LT8912B MIPI to HDMI Bridge + +maintainers: + - Adrien Grassein <adrien.grassein@gmail.com> + +description: | + The LT8912B is a bridge device which convert DSI to HDMI + +properties: + compatible: + enum: + - lontium,lt8912b + + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: GPIO connected to active high RESET pin. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Primary MIPI port for MIPI input + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: true + + required: + - data-lanes + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: | + HDMI port, should be connected to a node compatible with the + hdmi-connector binding. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - reset-gpios + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c4 { + #address-cells = <1>; + #size-cells = <0>; + + hdmi-bridge@48 { + compatible = "lontium,lt8912b"; + reg = <0x48>; + reset-gpios = <&max7323 0 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hdmi_out_in: endpoint { + data-lanes = <0 1 2 3>; + remote-endpoint = <&mipi_dsi_out>; + }; + }; + + port@1 { + reg = <1>; + + endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + }; + }; + }; + +... diff --git a/MAINTAINERS b/MAINTAINERS index 16ada1a4b751..6366b8eac3f6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -10460,6 +10460,11 @@ S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid.git F: drivers/hid/hid-lg-g15.c +LONTIUM LT8912B MIPI TO HDMI BRIDGE +M: Adrien Grassein <adrien.grassein@gmail.com> +S: Maintained +F: Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml + LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI) M: Sathya Prakash <sathya.prakash@broadcom.com> M: Sreekanth Reddy <sreekanth.reddy@broadcom.com> -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Adrien Grassein <adrien.grassein@gmail.com> Cc: devicetree@vger.kernel.org, jernej.skrabec@siol.net, narmstrong@baylibre.com, airlied@linux.ie, dri-devel@lists.freedesktop.org, jonas@kwiboo.se, linux-kernel@vger.kernel.org, robert.foss@linaro.org, a.hajda@samsung.com, robh+dt@kernel.org, Laurent.pinchart@ideasonboard.com, Adrien Grassein <adrien.grassein@gmail.com> Subject: [PATCH v5 1/2] dt-bindings: display: bridge: Add documentation for LT8912B Date: Sat, 27 Feb 2021 17:12:27 +0100 [thread overview] Message-ID: <20210227161228.1632521-2-adrien.grassein@gmail.com> (raw) In-Reply-To: <20210227161228.1632521-1-adrien.grassein@gmail.com> Lontium LT8912B is a DSI to HDMI bridge. Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> --- .../display/bridge/lontium,lt8912b.yaml | 102 ++++++++++++++++++ MAINTAINERS | 5 + 2 files changed, 107 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml new file mode 100644 index 000000000000..735d0233a7d6 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/lontium,lt8912b.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lontium LT8912B MIPI to HDMI Bridge + +maintainers: + - Adrien Grassein <adrien.grassein@gmail.com> + +description: | + The LT8912B is a bridge device which convert DSI to HDMI + +properties: + compatible: + enum: + - lontium,lt8912b + + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + description: GPIO connected to active high RESET pin. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Primary MIPI port for MIPI input + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: true + + required: + - data-lanes + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: | + HDMI port, should be connected to a node compatible with the + hdmi-connector binding. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - reset-gpios + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c4 { + #address-cells = <1>; + #size-cells = <0>; + + hdmi-bridge@48 { + compatible = "lontium,lt8912b"; + reg = <0x48>; + reset-gpios = <&max7323 0 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hdmi_out_in: endpoint { + data-lanes = <0 1 2 3>; + remote-endpoint = <&mipi_dsi_out>; + }; + }; + + port@1 { + reg = <1>; + + endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + }; + }; + }; + +... diff --git a/MAINTAINERS b/MAINTAINERS index 16ada1a4b751..6366b8eac3f6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -10460,6 +10460,11 @@ S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid.git F: drivers/hid/hid-lg-g15.c +LONTIUM LT8912B MIPI TO HDMI BRIDGE +M: Adrien Grassein <adrien.grassein@gmail.com> +S: Maintained +F: Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml + LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI) M: Sathya Prakash <sathya.prakash@broadcom.com> M: Sreekanth Reddy <sreekanth.reddy@broadcom.com> -- 2.25.1 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2021-02-27 16:15 UTC|newest] Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-02-27 16:12 [PATCH v5 0/2] Add support of Lontium lt8912 MIPI to HDMI bridge Adrien Grassein 2021-02-27 16:12 ` Adrien Grassein 2021-02-27 16:12 ` Adrien Grassein [this message] 2021-02-27 16:12 ` [PATCH v5 1/2] dt-bindings: display: bridge: Add documentation for LT8912B Adrien Grassein 2021-02-27 16:12 ` [PATCH v5 2/2] drm/bridge: Introduce LT8912B DSI to HDMI bridge Adrien Grassein 2021-02-27 16:12 ` Adrien Grassein 2021-02-27 19:16 ` kernel test robot 2021-02-27 19:16 ` kernel test robot 2021-02-27 19:16 ` kernel test robot
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210227161228.1632521-2-adrien.grassein@gmail.com \ --to=adrien.grassein@gmail.com \ --cc=Laurent.pinchart@ideasonboard.com \ --cc=a.hajda@samsung.com \ --cc=airlied@linux.ie \ --cc=daniel@ffwll.ch \ --cc=devicetree@vger.kernel.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=jernej.skrabec@siol.net \ --cc=jonas@kwiboo.se \ --cc=linux-kernel@vger.kernel.org \ --cc=narmstrong@baylibre.com \ --cc=robert.foss@linaro.org \ --cc=robh+dt@kernel.org \ --cc=robh@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.