From: Bard Liao <yung-chuan.liao@linux.intel.com> To: alsa-devel@alsa-project.org, vkoul@kernel.org Cc: vinod.koul@linaro.org, linux-kernel@vger.kernel.org, gregkh@linuxfoundation.org, srinivas.kandagatla@linaro.org, rander.wang@linux.intel.com, hui.wang@canonical.com, pierre-louis.bossart@linux.intel.com, sanyog.r.kale@intel.com, bard.liao@intel.com Subject: [PATCH v2 2/3] soundwire: bus: handle master quirks for bus clash and parity Date: Tue, 2 Mar 2021 16:27:19 +0800 [thread overview] Message-ID: <20210302082720.12322-3-yung-chuan.liao@linux.intel.com> (raw) In-Reply-To: <20210302082720.12322-1-yung-chuan.liao@linux.intel.com> Add optional interrupt status read/clear if the master quirks are set. In the case of the parity, the master quirk is only applied if the Slave doesn't already have a parity-related quirk. Co-developed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> --- drivers/soundwire/bus.c | 39 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c index 46885429928a..04eb879de145 100644 --- a/drivers/soundwire/bus.c +++ b/drivers/soundwire/bus.c @@ -1253,6 +1253,7 @@ static int sdw_slave_set_frequency(struct sdw_slave *slave) static int sdw_initialize_slave(struct sdw_slave *slave) { struct sdw_slave_prop *prop = &slave->prop; + int status; int ret; u8 val; @@ -1260,6 +1261,44 @@ static int sdw_initialize_slave(struct sdw_slave *slave) if (ret < 0) return ret; + if (slave->bus->prop.quirks & SDW_MASTER_QUIRKS_CLEAR_INITIAL_CLASH) { + /* Clear bus clash interrupt before enabling interrupt mask */ + status = sdw_read_no_pm(slave, SDW_SCP_INT1); + if (status < 0) { + dev_err(&slave->dev, + "SDW_SCP_INT1 (BUS_CLASH) read failed:%d\n", status); + return status; + } + if (status & SDW_SCP_INT1_BUS_CLASH) { + dev_warn(&slave->dev, "Bus clash detected before INT mask is enabled\n"); + ret = sdw_write_no_pm(slave, SDW_SCP_INT1, SDW_SCP_INT1_BUS_CLASH); + if (ret < 0) { + dev_err(&slave->dev, + "SDW_SCP_INT1 (BUS_CLASH) write failed:%d\n", ret); + return ret; + } + } + } + if ((slave->bus->prop.quirks & SDW_MASTER_QUIRKS_CLEAR_INITIAL_PARITY) && + !(slave->prop.quirks & SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY)) { + /* Clear parity interrupt before enabling interrupt mask */ + status = sdw_read_no_pm(slave, SDW_SCP_INT1); + if (status < 0) { + dev_err(&slave->dev, + "SDW_SCP_INT1 (PARITY) read failed:%d\n", status); + return status; + } + if (status & SDW_SCP_INT1_PARITY) { + dev_warn(&slave->dev, "PARITY error detected before INT mask is enabled\n"); + ret = sdw_write_no_pm(slave, SDW_SCP_INT1, SDW_SCP_INT1_PARITY); + if (ret < 0) { + dev_err(&slave->dev, + "SDW_SCP_INT1 (PARITY) write failed:%d\n", ret); + return ret; + } + } + } + /* * Set SCP_INT1_MASK register, typically bus clash and * implementation-defined interrupt mask. The Parity detection -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Bard Liao <yung-chuan.liao@linux.intel.com> To: alsa-devel@alsa-project.org, vkoul@kernel.org Cc: vinod.koul@linaro.org, gregkh@linuxfoundation.org, linux-kernel@vger.kernel.org, pierre-louis.bossart@linux.intel.com, hui.wang@canonical.com, srinivas.kandagatla@linaro.org, sanyog.r.kale@intel.com, rander.wang@linux.intel.com, bard.liao@intel.com Subject: [PATCH v2 2/3] soundwire: bus: handle master quirks for bus clash and parity Date: Tue, 2 Mar 2021 16:27:19 +0800 [thread overview] Message-ID: <20210302082720.12322-3-yung-chuan.liao@linux.intel.com> (raw) In-Reply-To: <20210302082720.12322-1-yung-chuan.liao@linux.intel.com> Add optional interrupt status read/clear if the master quirks are set. In the case of the parity, the master quirk is only applied if the Slave doesn't already have a parity-related quirk. Co-developed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> --- drivers/soundwire/bus.c | 39 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c index 46885429928a..04eb879de145 100644 --- a/drivers/soundwire/bus.c +++ b/drivers/soundwire/bus.c @@ -1253,6 +1253,7 @@ static int sdw_slave_set_frequency(struct sdw_slave *slave) static int sdw_initialize_slave(struct sdw_slave *slave) { struct sdw_slave_prop *prop = &slave->prop; + int status; int ret; u8 val; @@ -1260,6 +1261,44 @@ static int sdw_initialize_slave(struct sdw_slave *slave) if (ret < 0) return ret; + if (slave->bus->prop.quirks & SDW_MASTER_QUIRKS_CLEAR_INITIAL_CLASH) { + /* Clear bus clash interrupt before enabling interrupt mask */ + status = sdw_read_no_pm(slave, SDW_SCP_INT1); + if (status < 0) { + dev_err(&slave->dev, + "SDW_SCP_INT1 (BUS_CLASH) read failed:%d\n", status); + return status; + } + if (status & SDW_SCP_INT1_BUS_CLASH) { + dev_warn(&slave->dev, "Bus clash detected before INT mask is enabled\n"); + ret = sdw_write_no_pm(slave, SDW_SCP_INT1, SDW_SCP_INT1_BUS_CLASH); + if (ret < 0) { + dev_err(&slave->dev, + "SDW_SCP_INT1 (BUS_CLASH) write failed:%d\n", ret); + return ret; + } + } + } + if ((slave->bus->prop.quirks & SDW_MASTER_QUIRKS_CLEAR_INITIAL_PARITY) && + !(slave->prop.quirks & SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY)) { + /* Clear parity interrupt before enabling interrupt mask */ + status = sdw_read_no_pm(slave, SDW_SCP_INT1); + if (status < 0) { + dev_err(&slave->dev, + "SDW_SCP_INT1 (PARITY) read failed:%d\n", status); + return status; + } + if (status & SDW_SCP_INT1_PARITY) { + dev_warn(&slave->dev, "PARITY error detected before INT mask is enabled\n"); + ret = sdw_write_no_pm(slave, SDW_SCP_INT1, SDW_SCP_INT1_PARITY); + if (ret < 0) { + dev_err(&slave->dev, + "SDW_SCP_INT1 (PARITY) write failed:%d\n", ret); + return ret; + } + } + } + /* * Set SCP_INT1_MASK register, typically bus clash and * implementation-defined interrupt mask. The Parity detection -- 2.17.1
next prev parent reply other threads:[~2021-03-02 8:50 UTC|newest] Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-03-02 8:27 [PATCH v2 0/3] soundwire: clear bus clash/parity interrupt before the mask is enabled Bard Liao 2021-03-02 8:27 ` Bard Liao 2021-03-02 8:27 ` [PATCH v2 1/3] soundwire: add master quirks for bus clash and parity Bard Liao 2021-03-02 8:27 ` Bard Liao 2021-03-22 12:07 ` Vinod Koul 2021-03-22 12:07 ` Vinod Koul 2021-03-02 8:27 ` Bard Liao [this message] 2021-03-02 8:27 ` [PATCH v2 2/3] soundwire: bus: handle " Bard Liao 2021-03-02 8:27 ` [PATCH v2 3/3] soundwire: intel: add " Bard Liao 2021-03-02 8:27 ` Bard Liao 2021-03-22 12:10 ` [PATCH v2 0/3] soundwire: clear bus clash/parity interrupt before the mask is enabled Vinod Koul 2021-03-22 12:10 ` Vinod Koul
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210302082720.12322-3-yung-chuan.liao@linux.intel.com \ --to=yung-chuan.liao@linux.intel.com \ --cc=alsa-devel@alsa-project.org \ --cc=bard.liao@intel.com \ --cc=gregkh@linuxfoundation.org \ --cc=hui.wang@canonical.com \ --cc=linux-kernel@vger.kernel.org \ --cc=pierre-louis.bossart@linux.intel.com \ --cc=rander.wang@linux.intel.com \ --cc=sanyog.r.kale@intel.com \ --cc=srinivas.kandagatla@linaro.org \ --cc=vinod.koul@linaro.org \ --cc=vkoul@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.