All of lore.kernel.org
 help / color / mirror / Atom feed
From: Brad Larson <brad@pensando.io>
To: linux-arm-kernel@lists.infradead.org
Cc: arnd@arndb.de, linus.walleij@linaro.org,
	bgolaszewski@baylibre.com, broonie@kernel.org,
	fancer.lancer@gmail.com, adrian.hunter@intel.com,
	ulf.hansson@linaro.org, olof@lixom.net, brad@pensando.io,
	linux-gpio@vger.kernel.org, linux-spi@vger.kernel.org,
	linux-mmc@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 7/8] arm64: dts: Add Pensando Elba SoC support
Date: Wed,  3 Mar 2021 19:41:40 -0800	[thread overview]
Message-ID: <20210304034141.7062-8-brad@pensando.io> (raw)
In-Reply-To: <20210304034141.7062-1-brad@pensando.io>

Add Pensando common and Elba SoC specific device nodes
and corresponding binding documentation.

Signed-off-by: Brad Larson <brad@pensando.io>
---
 .../bindings/gpio/pensando,elba-spics.txt     |  24 ++
 .../devicetree/bindings/mmc/cdns,sdhci.yaml   |   2 +-
 .../bindings/spi/cadence-quadspi.txt          |   1 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm64/boot/dts/Makefile                  |   1 +
 arch/arm64/boot/dts/pensando/Makefile         |   6 +
 arch/arm64/boot/dts/pensando/elba-16core.dtsi | 171 ++++++++++
 .../boot/dts/pensando/elba-asic-common.dtsi   | 113 +++++++
 arch/arm64/boot/dts/pensando/elba-asic.dts    |   8 +
 .../boot/dts/pensando/elba-flash-parts.dtsi   |  80 +++++
 arch/arm64/boot/dts/pensando/elba.dtsi        | 310 ++++++++++++++++++
 11 files changed, 717 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/gpio/pensando,elba-spics.txt
 create mode 100644 arch/arm64/boot/dts/pensando/Makefile
 create mode 100644 arch/arm64/boot/dts/pensando/elba-16core.dtsi
 create mode 100644 arch/arm64/boot/dts/pensando/elba-asic-common.dtsi
 create mode 100644 arch/arm64/boot/dts/pensando/elba-asic.dts
 create mode 100644 arch/arm64/boot/dts/pensando/elba-flash-parts.dtsi
 create mode 100644 arch/arm64/boot/dts/pensando/elba.dtsi

diff --git a/Documentation/devicetree/bindings/gpio/pensando,elba-spics.txt b/Documentation/devicetree/bindings/gpio/pensando,elba-spics.txt
new file mode 100644
index 000000000000..30f5f3275238
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/pensando,elba-spics.txt
@@ -0,0 +1,24 @@
+Pensando Elba SPI Chip Select Driver
+
+The Pensando Elba ASIC provides four SPI bus chip selects
+
+Required properties:
+- compatible: Should be "pensando,elba-spics"
+- reg: Address range of spics controller
+- gpio-controller: Marks the device node as gpio controller
+- #gpio-cells: Must be 2
+
+Example:
+-------
+spics: spics@307c2468 {
+        compatible = "pensando,elba-spics";
+        reg = <0x0 0x307c2468 0x0 0x4>;
+        gpio-controller;
+        #gpio-cells = <2>;
+};
+
+&spi0 {
+        num-cs = <4>;
+        cs-gpios = <&spics 0 0>, <&spics 1 0>, <&porta 1 0>, <&porta 7 0>;
+	...
+}
diff --git a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
index af7442f73881..645ae696ba24 100644
--- a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
+++ b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
@@ -122,7 +122,7 @@ unevaluatedProperties: false
 examples:
   - |
     emmc: mmc@5a000000 {
-        compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc";
+        compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc", "pensando,elba-emmc";
         reg = <0x5a000000 0x400>;
         interrupts = <0 78 4>;
         clocks = <&clk 4>;
diff --git a/Documentation/devicetree/bindings/spi/cadence-quadspi.txt b/Documentation/devicetree/bindings/spi/cadence-quadspi.txt
index 8ace832a2d80..dbb346b2b1d7 100644
--- a/Documentation/devicetree/bindings/spi/cadence-quadspi.txt
+++ b/Documentation/devicetree/bindings/spi/cadence-quadspi.txt
@@ -6,6 +6,7 @@ Required properties:
 	For TI 66AK2G SoC - "ti,k2g-qspi", "cdns,qspi-nor".
 	For TI AM654 SoC  - "ti,am654-ospi", "cdns,qspi-nor".
 	For Intel LGM SoC - "intel,lgm-qspi", "cdns,qspi-nor".
+	For Pensando SoC - "pensando,cdns-qspi".
 - reg : Contains two entries, each of which is a tuple consisting of a
 	physical address and length. The first entry is the address and
 	length of the controller register set. The second entry is the
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index f6064d84a424..9a21d780c5e1 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -850,6 +850,8 @@ patternProperties:
     description: Parallax Inc.
   "^pda,.*":
     description: Precision Design Associates, Inc.
+  "^pensando,.*":
+    description: Pensando Systems Inc.
   "^pericom,.*":
     description: Pericom Technology Inc.
   "^pervasive,.*":
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index f1173cd93594..c85db0a097fe 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -19,6 +19,7 @@ subdir-y += marvell
 subdir-y += mediatek
 subdir-y += microchip
 subdir-y += nvidia
+subdir-y += pensando
 subdir-y += qcom
 subdir-y += realtek
 subdir-y += renesas
diff --git a/arch/arm64/boot/dts/pensando/Makefile b/arch/arm64/boot/dts/pensando/Makefile
new file mode 100644
index 000000000000..0c2c0961e64a
--- /dev/null
+++ b/arch/arm64/boot/dts/pensando/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_PENSANDO_ELBA_SOC) += elba-asic.dtb
+
+always-y	:= $(dtb-y)
+subdir-y	:= $(dts-dirs)
+clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/pensando/elba-16core.dtsi b/arch/arm64/boot/dts/pensando/elba-16core.dtsi
new file mode 100644
index 000000000000..b0386864cfec
--- /dev/null
+++ b/arch/arm64/boot/dts/pensando/elba-16core.dtsi
@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 { cpu = <&cpu0>; };
+				core1 { cpu = <&cpu1>; };
+				core2 { cpu = <&cpu2>; };
+				core3 { cpu = <&cpu3>; };
+			};
+			cluster1 {
+				core0 { cpu = <&cpu4>; };
+				core1 { cpu = <&cpu5>; };
+				core2 { cpu = <&cpu6>; };
+				core3 { cpu = <&cpu7>; };
+			};
+			cluster2 {
+				core0 { cpu = <&cpu8>; };
+				core1 { cpu = <&cpu9>; };
+				core2 { cpu = <&cpu10>; };
+				core3 { cpu = <&cpu11>; };
+			};
+			cluster3 {
+				core0 { cpu = <&cpu12>; };
+				core1 { cpu = <&cpu13>; };
+				core2 { cpu = <&cpu14>; };
+				core3 { cpu = <&cpu15>; };
+			};
+		};
+
+		// CLUSTER 0
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0 0x0>;
+			enable-method = "spin-table";
+			next-level-cache = <&l2_0>;
+		};
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0 0x1>;
+			enable-method = "spin-table";
+			next-level-cache = <&l2_0>;
+		};
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0 0x2>;
+			enable-method = "spin-table";
+			next-level-cache = <&l2_0>;
+		};
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0 0x3>;
+			enable-method = "spin-table";
+			next-level-cache = <&l2_0>;
+		};
+
+		l2_0: l2-cache0 {
+			compatible = "cache";
+		};
+
+		// CLUSTER 1
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0 0x100>;
+			enable-method = "spin-table";
+			next-level-cache = <&l2_1>;
+		};
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0 0x101>;
+			enable-method = "spin-table";
+			next-level-cache = <&l2_1>;
+		};
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0 0x102>;
+			enable-method = "spin-table";
+			next-level-cache = <&l2_1>;
+		};
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0 0x103>;
+			enable-method = "spin-table";
+			next-level-cache = <&l2_1>;
+		};
+
+		l2_1: l2-cache1 {
+			compatible = "cache";
+		};
+
+		// CLUSTER 2
+		cpu8: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0 0x200>;
+			enable-method = "spin-table";
+			next-level-cache = <&l2_2>;
+		};
+		cpu9: cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0 0x201>;
+			enable-method = "spin-table";
+			next-level-cache = <&l2_2>;
+		};
+		cpu10: cpu@202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0 0x202>;
+			enable-method = "spin-table";
+			next-level-cache = <&l2_2>;
+		};
+		cpu11: cpu@203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0 0x203>;
+			enable-method = "spin-table";
+			next-level-cache = <&l2_2>;
+		};
+
+		l2_2: l2-cache2 {
+			compatible = "cache";
+		};
+
+		// CLUSTER 3
+		cpu12: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0 0x300>;
+			enable-method = "spin-table";
+			next-level-cache = <&l2_3>;
+		};
+		cpu13: cpu@301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0 0x301>;
+			enable-method = "spin-table";
+			next-level-cache = <&l2_3>;
+		};
+		cpu14: cpu@302 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0 0x302>;
+			enable-method = "spin-table";
+			next-level-cache = <&l2_3>;
+		};
+		cpu15: cpu@303 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0 0x303>;
+			enable-method = "spin-table";
+			next-level-cache = <&l2_3>;
+		};
+
+		l2_3: l2-cache3 {
+			compatible = "cache";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/pensando/elba-asic-common.dtsi b/arch/arm64/boot/dts/pensando/elba-asic-common.dtsi
new file mode 100644
index 000000000000..9623df208131
--- /dev/null
+++ b/arch/arm64/boot/dts/pensando/elba-asic-common.dtsi
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	model = "Elba ASIC Board";
+
+	aliases {
+		serial0 = &uart0;
+                spi0 = &spi0;
+                spi1 = &qspi;
+	};
+
+	chosen {
+		stdout-path = "serial0:19200n8";
+	};
+};
+
+&ahb_clk {
+	clock-frequency = <400000000>;
+};
+
+&emmc_clk {
+	clock-frequency = <200000000>;
+};
+
+&flash_clk {
+	clock-frequency = <400000000>;
+};
+
+&ref_clk {
+	clock-frequency = <156250000>;
+};
+
+&qspi {
+	status = "okay";
+	flash0: mt25q@0 {
+		compatible = "jdec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+		spi-rx-bus-width = <2>;
+		m25p,fast-read;
+		cdns,read-delay = <0>;
+		cdns,tshsl-ns = <0>;
+		cdns,tsd2d-ns = <0>;
+		cdns,tchsh-ns = <0>;
+		cdns,tslch-ns = <0>;
+	};
+};
+
+&gpio0 {
+	status = "ok";
+};
+
+&emmc {
+	bus-width = <8>;
+	status = "ok";
+};
+
+&wdt0 {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+	tmp451@4c {
+		compatible = "ti,tmp451";
+		reg = <0x4c>;
+	};
+	tps53659@62 {
+		compatible = "ti,tps53659";
+		reg = <0x62>;
+	};
+	pcf85263@51 {
+		compatible = "nxp,pcf85263";
+		reg = <0x51>;
+	};
+};
+
+&spi0 {
+	num-cs = <4>;
+	cs-gpios = <&spics 0 0>, <&spics 1 0>, <&porta 1 0>, <&porta 7 0>;
+	status = "okay";
+	spi@0 {
+		compatible = "pensando,cpld";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <12000000>;
+		reg = <0>;
+	};
+	spi@1 {
+		compatible = "pensando,cpld";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <12000000>;
+		reg = <1>;
+	};
+	spi@2 {
+		compatible = "pensando,cpld-rd1173";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <12000000>;
+		reg = <2>;
+		interrupt-parent = <&porta>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+	spi@3 {
+		compatible = "pensando,cpld";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <12000000>;
+		reg = <3>;
+	};
+};
diff --git a/arch/arm64/boot/dts/pensando/elba-asic.dts b/arch/arm64/boot/dts/pensando/elba-asic.dts
new file mode 100644
index 000000000000..411c48457006
--- /dev/null
+++ b/arch/arm64/boot/dts/pensando/elba-asic.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "elba.dtsi"
+#include "elba-16core.dtsi"
+#include "elba-asic-common.dtsi"
+#include "elba-flash-parts.dtsi"
diff --git a/arch/arm64/boot/dts/pensando/elba-flash-parts.dtsi b/arch/arm64/boot/dts/pensando/elba-flash-parts.dtsi
new file mode 100644
index 000000000000..1983de1a8403
--- /dev/null
+++ b/arch/arm64/boot/dts/pensando/elba-flash-parts.dtsi
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0
+
+&flash0 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "flash";
+			reg = <0x00010000 0x0fff0000>;
+		};
+		partition@f0000 {
+			label = "golduenv";
+			reg = <0x000f0000 0x00010000>;
+		};
+		partition@100000 {
+			label = "boot0";
+			reg = <0x00100000 0x00080000>;
+		};
+		partition@180000 {
+			label = "golduboot";
+			reg = <0x00180000 0x00200000>;
+		};
+		partition@400000 {
+			label = "goldfw";
+			reg = <0x00400000 0x03c00000>;
+		};
+		partition@4010000 {
+			label = "fwmap";
+			reg = <0x04010000 0x00020000>;
+		};
+		partition@4030000 {
+			label = "fwsel";
+			reg = <0x04030000 0x00020000>;
+		};
+		partition@4090000 {
+			label = "bootlog";
+			reg = <0x04090000 0x00020000>;
+		};
+		partition@40b0000 {
+			label = "panicbuf";
+			reg = <0x040b0000 0x00020000>;
+		};
+		partition@40d0000 {
+			label = "uservars";
+			reg = <0x040d0000 0x00020000>;
+		};
+		partition@4200000 {
+			label = "uboota";
+			reg = <0x04200000 0x00400000>;
+		};
+		partition@4600000 {
+			label = "ubootb";
+			reg = <0x04600000 0x00400000>;
+		};
+		partition@4a00000 {
+			label = "mainfwa";
+			reg = <0x04a00000 0x01000000>;
+		};
+		partition@5a00000 {
+			label = "mainfwb";
+			reg = <0x05a00000 0x01000000>;
+		};
+		partition@8000000 {
+			label = "diagfw";
+			reg = <0x08000000 0x07fe0000>;
+		};
+		partition@ffe0000 {
+			label = "ubootenv";
+			reg = <0x0ffe0000 0x00010000>;
+		};
+	};
+};
+
+&soc {
+	panicdump@740b0000 {
+		compatible = "pensando,capri-crash";
+		reg = <0x0 0x740b0000 0x0 0x00020000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/pensando/elba.dtsi b/arch/arm64/boot/dts/pensando/elba.dtsi
new file mode 100644
index 000000000000..72245e279483
--- /dev/null
+++ b/arch/arm64/boot/dts/pensando/elba.dtsi
@@ -0,0 +1,310 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019-2021, Pensando Systems Inc.
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "dt-bindings/interrupt-controller/arm-gic.h"
+
+/ {
+	compatible = "pensando,elba";
+
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clocks {
+		ahb_clk: oscillator0 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+		emmc_clk: oscillator2 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+		flash_clk: oscillator3 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+		ref_clk: oscillator4 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) |
+					IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) |
+					IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) |
+					IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) |
+					IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a72-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(1) |
+				IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/* Common UIO device for MSI drivers */
+	uio_penmsi {
+		compatible = "pensando,uio_penmsi";
+		name = "uio_penmsi";
+	};
+
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@800000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			interrupt-controller;
+			reg = <0x0 0x800000 0x0 0x200000>,	// GICD
+			      <0x0 0xa00000 0x0 0x200000>;	// GICR
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+			its: interrupt-controller@820000 {
+				compatible = "arm,gic-v3-its";
+				msi-controller;
+				#msi-cells = <1>;
+				reg = <0x0 0x820000 0x0 0x10000>;
+				socionext,synquacer-pre-its =
+							<0xc00000 0x1000000>;
+			};
+		};
+
+		/*
+		 * Until we  know the interrupt domain following this, we
+		 * are forced to use this is the place where interrupts from
+		 * PCI converge. In the ideal case, we use one domain higher,
+		 * where the PCI-ness has been shed.
+		 */
+		pxc0_intr: intc@20102200 {
+			compatible = "pensando,soc-ictlr-csrintr";
+			interrupt-controller;
+			reg = <0x0 0x20102200 0x0 0x4>;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pxc0_intr";
+		};
+
+		uart0: serial@4800 {
+			device_type = "serial";
+			compatible = "ns16550a";
+			reg = <0x0 0x4800 0x0 0x100>;
+			clocks = <&ref_clk>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		qspi: spi@2400 {
+			compatible = "pensando,cdns-qspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2400 0x0 0x400>,
+			      <0x0 0x7fff0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&flash_clk>;
+			cdns,fifo-depth = <1024>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x7fff0000>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@4000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x0 0x4000 0x0 0x78>;
+			status = "disabled";
+
+			porta: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				reg = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <8>;
+				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				interrupt-parent = <&gic>;
+				#interrupt-cells = <2>;
+			};
+			portb: gpio-controller@1 {
+				compatible = "snps,dw-apb-gpio-port";
+				reg = <1>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <8>;
+			};
+		};
+
+		i2c0: i2c@400 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x400 0x0 0x100>;
+			clocks = <&ahb_clk>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			i2c-sda-hold-time-ns = <480>;
+			snps,sda-timeout-ms = <750>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		/* UIO device using interrupt line PCIEMAC */
+		pciemac@20102200 {
+			#address-cells = <2>;
+			#size-cells = <2>;
+			#interrupt-cells = <3>;
+
+			compatible = "pensando,uio_pciemac";
+			register-type = "csr-interrupt";
+			interrupt-parent = <&pxc0_intr>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0x20102200 0x0 0x10>; /* pxc0_intr */
+
+			enable_csr_paddr = <0x0 0x20102200 0x0 0x10>;
+			enable_mask = <(1 << 0)>;
+		};
+
+		/* MSI UIO device 1 */
+		uio_penmsi1@520000 {
+			compatible = "pensando,uio_penmsi1";
+			reg = <0x0 0x520000 0x0 0x10000>;
+			msi-parent = <&its 0xa>;
+			num-interrupts = <16>;  /* # MSI interrupts to get */
+		};
+
+		spics: spics@307c2468 {
+			compatible = "pensando,elba-spics";
+			reg = <0x0 0x307c2468 0x0 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		spi0: spi@2800 {
+			compatible = "pensando,elba-spi";
+			reg = <0x0 0x2800 0x0 0x100>;
+			clocks = <&ahb_clk>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			num-cs = <2>;
+			status = "disabled";
+		};
+
+		wdt0: watchdog@1400 {
+			compatible = "snps,dw-wdt";
+			reg = <0x0 0x1400 0x0 0x100>;
+			clocks = <&ahb_clk>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+		wdt1: watchdog@1800 {
+			compatible = "snps,dw-wdt";
+			reg = <0x0 0x1800 0x0 0x100>;
+			clocks = <&ahb_clk>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+		wdt2: watchdog@1c00 {
+			compatible = "snps,dw-wdt";
+			reg = <0x0 0x1c00 0x0 0x100>;
+			clocks = <&ahb_clk>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+		wdt3: watchdog@2000 {
+			compatible = "snps,dw-wdt";
+			reg = <0x0 0x2000 0x0 0x100>;
+			clocks = <&ahb_clk>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		emmc: sdio-host-chip@30440000 {
+			compatible = "pensando,elba-emmc";
+			clocks = <&emmc_clk>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0x30440000 0x0 0x10000
+			       0x0 0x30480044 0x0 0x4>;
+			cdns,phy-input-delay-sd-highspeed = <0x4>;
+			cdns,phy-input-delay-legacy = <0x4>;
+			cdns,phy-input-delay-sd-uhs-sdr50 = <0x6>;
+			cdns,phy-input-delay-sd-uhs-ddr50 = <0x16>;
+			cdns,mmc-ddr-1_8v;
+			status = "disabled";
+		} ;
+
+		pcie@307c2480 {
+			compatible = "pensando,pcie";
+			reg = <0x0 0x307c2480 0x0 0x4   /* MS CFG_WDT */
+			       0x0 0x00001400 0x0 0x10  /* WDT0 */
+			       0x0 0x20000000 0x0 0x00380000>; /* PXB Base */
+		};
+
+		panic: panicdump@0 {
+			compatible = "pensando,pen-crash";
+			status = "disabled";
+		};
+
+		bsm@307c2080 {
+			compatible = "pensando,bsm";
+			reg = <0x0 0x307c2080 0x0 0x4>;
+		};
+	};
+	mnet0: mnet0 {
+		compatible = "pensando,mnet";
+		msi-parent = <&its 0x0>;
+	};
+	mnet1: mnet1 {
+		compatible = "pensando,mnet";
+		msi-parent = <&its 0x1>;
+	};
+	mnet2: mnet2 {
+		compatible = "pensando,mnet";
+		msi-parent = <&its 0x2>;
+	};
+	mnet3: mnet3 {
+		compatible = "pensando,mnet";
+		msi-parent = <&its 0x3>;
+	};
+	mnet4: mnet4 {
+		compatible = "pensando,mnet";
+		msi-parent = <&its 0x4>;
+	};
+	mnet5: mnet5 {
+		compatible = "pensando,mnet";
+		msi-parent = <&its 0x5>;
+	};
+	mnet6: mnet6 {
+		compatible = "pensando,mnet";
+		msi-parent = <&its 0x6>;
+	};
+	mnet7: mnet7 {
+		compatible = "pensando,mnet";
+		msi-parent = <&its 0x7>;
+	};
+	mnet8: mnet8 {
+		compatible = "pensando,mnet";
+		msi-parent = <&its 0x8>;
+	};
+	mnet9: mnet9 {
+		compatible = "pensando,mnet";
+		msi-parent = <&its 0x9>;
+	};
+};
-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: Brad Larson <brad@pensando.io>
To: linux-arm-kernel@lists.infradead.org
Cc: arnd@arndb.de, linus.walleij@linaro.org,
	bgolaszewski@baylibre.com, broonie@kernel.org,
	fancer.lancer@gmail.com, adrian.hunter@intel.com,
	ulf.hansson@linaro.org, olof@lixom.net, brad@pensando.io,
	linux-gpio@vger.kernel.org, linux-spi@vger.kernel.org,
	linux-mmc@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 7/8] arm64: dts: Add Pensando Elba SoC support
Date: Wed,  3 Mar 2021 19:41:40 -0800	[thread overview]
Message-ID: <20210304034141.7062-8-brad@pensando.io> (raw)
In-Reply-To: <20210304034141.7062-1-brad@pensando.io>

Add Pensando common and Elba SoC specific device nodes
and corresponding binding documentation.

Signed-off-by: Brad Larson <brad@pensando.io>
---
 .../bindings/gpio/pensando,elba-spics.txt     |  24 ++
 .../devicetree/bindings/mmc/cdns,sdhci.yaml   |   2 +-
 .../bindings/spi/cadence-quadspi.txt          |   1 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm64/boot/dts/Makefile                  |   1 +
 arch/arm64/boot/dts/pensando/Makefile         |   6 +
 arch/arm64/boot/dts/pensando/elba-16core.dtsi | 171 ++++++++++
 .../boot/dts/pensando/elba-asic-common.dtsi   | 113 +++++++
 arch/arm64/boot/dts/pensando/elba-asic.dts    |   8 +
 .../boot/dts/pensando/elba-flash-parts.dtsi   |  80 +++++
 arch/arm64/boot/dts/pensando/elba.dtsi        | 310 ++++++++++++++++++
 11 files changed, 717 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/gpio/pensando,elba-spics.txt
 create mode 100644 arch/arm64/boot/dts/pensando/Makefile
 create mode 100644 arch/arm64/boot/dts/pensando/elba-16core.dtsi
 create mode 100644 arch/arm64/boot/dts/pensando/elba-asic-common.dtsi
 create mode 100644 arch/arm64/boot/dts/pensando/elba-asic.dts
 create mode 100644 arch/arm64/boot/dts/pensando/elba-flash-parts.dtsi
 create mode 100644 arch/arm64/boot/dts/pensando/elba.dtsi

diff --git a/Documentation/devicetree/bindings/gpio/pensando,elba-spics.txt b/Documentation/devicetree/bindings/gpio/pensando,elba-spics.txt
new file mode 100644
index 000000000000..30f5f3275238
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/pensando,elba-spics.txt
@@ -0,0 +1,24 @@
+Pensando Elba SPI Chip Select Driver
+
+The Pensando Elba ASIC provides four SPI bus chip selects
+
+Required properties:
+- compatible: Should be "pensando,elba-spics"
+- reg: Address range of spics controller
+- gpio-controller: Marks the device node as gpio controller
+- #gpio-cells: Must be 2
+
+Example:
+-------
+spics: spics@307c2468 {
+        compatible = "pensando,elba-spics";
+        reg = <0x0 0x307c2468 0x0 0x4>;
+        gpio-controller;
+        #gpio-cells = <2>;
+};
+
+&spi0 {
+        num-cs = <4>;
+        cs-gpios = <&spics 0 0>, <&spics 1 0>, <&porta 1 0>, <&porta 7 0>;
+	...
+}
diff --git a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
index af7442f73881..645ae696ba24 100644
--- a/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
+++ b/Documentation/devicetree/bindings/mmc/cdns,sdhci.yaml
@@ -122,7 +122,7 @@ unevaluatedProperties: false
 examples:
   - |
     emmc: mmc@5a000000 {
-        compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc";
+        compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc", "pensando,elba-emmc";
         reg = <0x5a000000 0x400>;
         interrupts = <0 78 4>;
         clocks = <&clk 4>;
diff --git a/Documentation/devicetree/bindings/spi/cadence-quadspi.txt b/Documentation/devicetree/bindings/spi/cadence-quadspi.txt
index 8ace832a2d80..dbb346b2b1d7 100644
--- a/Documentation/devicetree/bindings/spi/cadence-quadspi.txt
+++ b/Documentation/devicetree/bindings/spi/cadence-quadspi.txt
@@ -6,6 +6,7 @@ Required properties:
 	For TI 66AK2G SoC - "ti,k2g-qspi", "cdns,qspi-nor".
 	For TI AM654 SoC  - "ti,am654-ospi", "cdns,qspi-nor".
 	For Intel LGM SoC - "intel,lgm-qspi", "cdns,qspi-nor".
+	For Pensando SoC - "pensando,cdns-qspi".
 - reg : Contains two entries, each of which is a tuple consisting of a
 	physical address and length. The first entry is the address and
 	length of the controller register set. The second entry is the
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index f6064d84a424..9a21d780c5e1 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -850,6 +850,8 @@ patternProperties:
     description: Parallax Inc.
   "^pda,.*":
     description: Precision Design Associates, Inc.
+  "^pensando,.*":
+    description: Pensando Systems Inc.
   "^pericom,.*":
     description: Pericom Technology Inc.
   "^pervasive,.*":
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index f1173cd93594..c85db0a097fe 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -19,6 +19,7 @@ subdir-y += marvell
 subdir-y += mediatek
 subdir-y += microchip
 subdir-y += nvidia
+subdir-y += pensando
 subdir-y += qcom
 subdir-y += realtek
 subdir-y += renesas
diff --git a/arch/arm64/boot/dts/pensando/Makefile b/arch/arm64/boot/dts/pensando/Makefile
new file mode 100644
index 000000000000..0c2c0961e64a
--- /dev/null
+++ b/arch/arm64/boot/dts/pensando/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_PENSANDO_ELBA_SOC) += elba-asic.dtb
+
+always-y	:= $(dtb-y)
+subdir-y	:= $(dts-dirs)
+clean-files	:= *.dtb
diff --git a/arch/arm64/boot/dts/pensando/elba-16core.dtsi b/arch/arm64/boot/dts/pensando/elba-16core.dtsi
new file mode 100644
index 000000000000..b0386864cfec
--- /dev/null
+++ b/arch/arm64/boot/dts/pensando/elba-16core.dtsi
@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 { cpu = <&cpu0>; };
+				core1 { cpu = <&cpu1>; };
+				core2 { cpu = <&cpu2>; };
+				core3 { cpu = <&cpu3>; };
+			};
+			cluster1 {
+				core0 { cpu = <&cpu4>; };
+				core1 { cpu = <&cpu5>; };
+				core2 { cpu = <&cpu6>; };
+				core3 { cpu = <&cpu7>; };
+			};
+			cluster2 {
+				core0 { cpu = <&cpu8>; };
+				core1 { cpu = <&cpu9>; };
+				core2 { cpu = <&cpu10>; };
+				core3 { cpu = <&cpu11>; };
+			};
+			cluster3 {
+				core0 { cpu = <&cpu12>; };
+				core1 { cpu = <&cpu13>; };
+				core2 { cpu = <&cpu14>; };
+				core3 { cpu = <&cpu15>; };
+			};
+		};
+
+		// CLUSTER 0
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0 0x0>;
+			enable-method = "spin-table";
+			next-level-cache = <&l2_0>;
+		};
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0 0x1>;
+			enable-method = "spin-table";
+			next-level-cache = <&l2_0>;
+		};
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0 0x2>;
+			enable-method = "spin-table";
+			next-level-cache = <&l2_0>;
+		};
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0 0x3>;
+			enable-method = "spin-table";
+			next-level-cache = <&l2_0>;
+		};
+
+		l2_0: l2-cache0 {
+			compatible = "cache";
+		};
+
+		// CLUSTER 1
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0 0x100>;
+			enable-method = "spin-table";
+			next-level-cache = <&l2_1>;
+		};
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0 0x101>;
+			enable-method = "spin-table";
+			next-level-cache = <&l2_1>;
+		};
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0 0x102>;
+			enable-method = "spin-table";
+			next-level-cache = <&l2_1>;
+		};
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0 0x103>;
+			enable-method = "spin-table";
+			next-level-cache = <&l2_1>;
+		};
+
+		l2_1: l2-cache1 {
+			compatible = "cache";
+		};
+
+		// CLUSTER 2
+		cpu8: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0 0x200>;
+			enable-method = "spin-table";
+			next-level-cache = <&l2_2>;
+		};
+		cpu9: cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0 0x201>;
+			enable-method = "spin-table";
+			next-level-cache = <&l2_2>;
+		};
+		cpu10: cpu@202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0 0x202>;
+			enable-method = "spin-table";
+			next-level-cache = <&l2_2>;
+		};
+		cpu11: cpu@203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0 0x203>;
+			enable-method = "spin-table";
+			next-level-cache = <&l2_2>;
+		};
+
+		l2_2: l2-cache2 {
+			compatible = "cache";
+		};
+
+		// CLUSTER 3
+		cpu12: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0 0x300>;
+			enable-method = "spin-table";
+			next-level-cache = <&l2_3>;
+		};
+		cpu13: cpu@301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0 0x301>;
+			enable-method = "spin-table";
+			next-level-cache = <&l2_3>;
+		};
+		cpu14: cpu@302 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0 0x302>;
+			enable-method = "spin-table";
+			next-level-cache = <&l2_3>;
+		};
+		cpu15: cpu@303 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0 0x303>;
+			enable-method = "spin-table";
+			next-level-cache = <&l2_3>;
+		};
+
+		l2_3: l2-cache3 {
+			compatible = "cache";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/pensando/elba-asic-common.dtsi b/arch/arm64/boot/dts/pensando/elba-asic-common.dtsi
new file mode 100644
index 000000000000..9623df208131
--- /dev/null
+++ b/arch/arm64/boot/dts/pensando/elba-asic-common.dtsi
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	model = "Elba ASIC Board";
+
+	aliases {
+		serial0 = &uart0;
+                spi0 = &spi0;
+                spi1 = &qspi;
+	};
+
+	chosen {
+		stdout-path = "serial0:19200n8";
+	};
+};
+
+&ahb_clk {
+	clock-frequency = <400000000>;
+};
+
+&emmc_clk {
+	clock-frequency = <200000000>;
+};
+
+&flash_clk {
+	clock-frequency = <400000000>;
+};
+
+&ref_clk {
+	clock-frequency = <156250000>;
+};
+
+&qspi {
+	status = "okay";
+	flash0: mt25q@0 {
+		compatible = "jdec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+		spi-rx-bus-width = <2>;
+		m25p,fast-read;
+		cdns,read-delay = <0>;
+		cdns,tshsl-ns = <0>;
+		cdns,tsd2d-ns = <0>;
+		cdns,tchsh-ns = <0>;
+		cdns,tslch-ns = <0>;
+	};
+};
+
+&gpio0 {
+	status = "ok";
+};
+
+&emmc {
+	bus-width = <8>;
+	status = "ok";
+};
+
+&wdt0 {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+	tmp451@4c {
+		compatible = "ti,tmp451";
+		reg = <0x4c>;
+	};
+	tps53659@62 {
+		compatible = "ti,tps53659";
+		reg = <0x62>;
+	};
+	pcf85263@51 {
+		compatible = "nxp,pcf85263";
+		reg = <0x51>;
+	};
+};
+
+&spi0 {
+	num-cs = <4>;
+	cs-gpios = <&spics 0 0>, <&spics 1 0>, <&porta 1 0>, <&porta 7 0>;
+	status = "okay";
+	spi@0 {
+		compatible = "pensando,cpld";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <12000000>;
+		reg = <0>;
+	};
+	spi@1 {
+		compatible = "pensando,cpld";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <12000000>;
+		reg = <1>;
+	};
+	spi@2 {
+		compatible = "pensando,cpld-rd1173";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <12000000>;
+		reg = <2>;
+		interrupt-parent = <&porta>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+	spi@3 {
+		compatible = "pensando,cpld";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <12000000>;
+		reg = <3>;
+	};
+};
diff --git a/arch/arm64/boot/dts/pensando/elba-asic.dts b/arch/arm64/boot/dts/pensando/elba-asic.dts
new file mode 100644
index 000000000000..411c48457006
--- /dev/null
+++ b/arch/arm64/boot/dts/pensando/elba-asic.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+#include "elba.dtsi"
+#include "elba-16core.dtsi"
+#include "elba-asic-common.dtsi"
+#include "elba-flash-parts.dtsi"
diff --git a/arch/arm64/boot/dts/pensando/elba-flash-parts.dtsi b/arch/arm64/boot/dts/pensando/elba-flash-parts.dtsi
new file mode 100644
index 000000000000..1983de1a8403
--- /dev/null
+++ b/arch/arm64/boot/dts/pensando/elba-flash-parts.dtsi
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0
+
+&flash0 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "flash";
+			reg = <0x00010000 0x0fff0000>;
+		};
+		partition@f0000 {
+			label = "golduenv";
+			reg = <0x000f0000 0x00010000>;
+		};
+		partition@100000 {
+			label = "boot0";
+			reg = <0x00100000 0x00080000>;
+		};
+		partition@180000 {
+			label = "golduboot";
+			reg = <0x00180000 0x00200000>;
+		};
+		partition@400000 {
+			label = "goldfw";
+			reg = <0x00400000 0x03c00000>;
+		};
+		partition@4010000 {
+			label = "fwmap";
+			reg = <0x04010000 0x00020000>;
+		};
+		partition@4030000 {
+			label = "fwsel";
+			reg = <0x04030000 0x00020000>;
+		};
+		partition@4090000 {
+			label = "bootlog";
+			reg = <0x04090000 0x00020000>;
+		};
+		partition@40b0000 {
+			label = "panicbuf";
+			reg = <0x040b0000 0x00020000>;
+		};
+		partition@40d0000 {
+			label = "uservars";
+			reg = <0x040d0000 0x00020000>;
+		};
+		partition@4200000 {
+			label = "uboota";
+			reg = <0x04200000 0x00400000>;
+		};
+		partition@4600000 {
+			label = "ubootb";
+			reg = <0x04600000 0x00400000>;
+		};
+		partition@4a00000 {
+			label = "mainfwa";
+			reg = <0x04a00000 0x01000000>;
+		};
+		partition@5a00000 {
+			label = "mainfwb";
+			reg = <0x05a00000 0x01000000>;
+		};
+		partition@8000000 {
+			label = "diagfw";
+			reg = <0x08000000 0x07fe0000>;
+		};
+		partition@ffe0000 {
+			label = "ubootenv";
+			reg = <0x0ffe0000 0x00010000>;
+		};
+	};
+};
+
+&soc {
+	panicdump@740b0000 {
+		compatible = "pensando,capri-crash";
+		reg = <0x0 0x740b0000 0x0 0x00020000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/pensando/elba.dtsi b/arch/arm64/boot/dts/pensando/elba.dtsi
new file mode 100644
index 000000000000..72245e279483
--- /dev/null
+++ b/arch/arm64/boot/dts/pensando/elba.dtsi
@@ -0,0 +1,310 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019-2021, Pensando Systems Inc.
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "dt-bindings/interrupt-controller/arm-gic.h"
+
+/ {
+	compatible = "pensando,elba";
+
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clocks {
+		ahb_clk: oscillator0 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+		emmc_clk: oscillator2 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+		flash_clk: oscillator3 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+		ref_clk: oscillator4 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) |
+					IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) |
+					IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) |
+					IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) |
+					IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a72-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(1) |
+				IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/* Common UIO device for MSI drivers */
+	uio_penmsi {
+		compatible = "pensando,uio_penmsi";
+		name = "uio_penmsi";
+	};
+
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@800000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			interrupt-controller;
+			reg = <0x0 0x800000 0x0 0x200000>,	// GICD
+			      <0x0 0xa00000 0x0 0x200000>;	// GICR
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+			its: interrupt-controller@820000 {
+				compatible = "arm,gic-v3-its";
+				msi-controller;
+				#msi-cells = <1>;
+				reg = <0x0 0x820000 0x0 0x10000>;
+				socionext,synquacer-pre-its =
+							<0xc00000 0x1000000>;
+			};
+		};
+
+		/*
+		 * Until we  know the interrupt domain following this, we
+		 * are forced to use this is the place where interrupts from
+		 * PCI converge. In the ideal case, we use one domain higher,
+		 * where the PCI-ness has been shed.
+		 */
+		pxc0_intr: intc@20102200 {
+			compatible = "pensando,soc-ictlr-csrintr";
+			interrupt-controller;
+			reg = <0x0 0x20102200 0x0 0x4>;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pxc0_intr";
+		};
+
+		uart0: serial@4800 {
+			device_type = "serial";
+			compatible = "ns16550a";
+			reg = <0x0 0x4800 0x0 0x100>;
+			clocks = <&ref_clk>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		qspi: spi@2400 {
+			compatible = "pensando,cdns-qspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2400 0x0 0x400>,
+			      <0x0 0x7fff0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&flash_clk>;
+			cdns,fifo-depth = <1024>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x7fff0000>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@4000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x0 0x4000 0x0 0x78>;
+			status = "disabled";
+
+			porta: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				reg = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <8>;
+				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				interrupt-parent = <&gic>;
+				#interrupt-cells = <2>;
+			};
+			portb: gpio-controller@1 {
+				compatible = "snps,dw-apb-gpio-port";
+				reg = <1>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				ngpios = <8>;
+			};
+		};
+
+		i2c0: i2c@400 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x400 0x0 0x100>;
+			clocks = <&ahb_clk>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			i2c-sda-hold-time-ns = <480>;
+			snps,sda-timeout-ms = <750>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		/* UIO device using interrupt line PCIEMAC */
+		pciemac@20102200 {
+			#address-cells = <2>;
+			#size-cells = <2>;
+			#interrupt-cells = <3>;
+
+			compatible = "pensando,uio_pciemac";
+			register-type = "csr-interrupt";
+			interrupt-parent = <&pxc0_intr>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0x20102200 0x0 0x10>; /* pxc0_intr */
+
+			enable_csr_paddr = <0x0 0x20102200 0x0 0x10>;
+			enable_mask = <(1 << 0)>;
+		};
+
+		/* MSI UIO device 1 */
+		uio_penmsi1@520000 {
+			compatible = "pensando,uio_penmsi1";
+			reg = <0x0 0x520000 0x0 0x10000>;
+			msi-parent = <&its 0xa>;
+			num-interrupts = <16>;  /* # MSI interrupts to get */
+		};
+
+		spics: spics@307c2468 {
+			compatible = "pensando,elba-spics";
+			reg = <0x0 0x307c2468 0x0 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		spi0: spi@2800 {
+			compatible = "pensando,elba-spi";
+			reg = <0x0 0x2800 0x0 0x100>;
+			clocks = <&ahb_clk>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			num-cs = <2>;
+			status = "disabled";
+		};
+
+		wdt0: watchdog@1400 {
+			compatible = "snps,dw-wdt";
+			reg = <0x0 0x1400 0x0 0x100>;
+			clocks = <&ahb_clk>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+		wdt1: watchdog@1800 {
+			compatible = "snps,dw-wdt";
+			reg = <0x0 0x1800 0x0 0x100>;
+			clocks = <&ahb_clk>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+		wdt2: watchdog@1c00 {
+			compatible = "snps,dw-wdt";
+			reg = <0x0 0x1c00 0x0 0x100>;
+			clocks = <&ahb_clk>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+		wdt3: watchdog@2000 {
+			compatible = "snps,dw-wdt";
+			reg = <0x0 0x2000 0x0 0x100>;
+			clocks = <&ahb_clk>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		emmc: sdio-host-chip@30440000 {
+			compatible = "pensando,elba-emmc";
+			clocks = <&emmc_clk>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x0 0x30440000 0x0 0x10000
+			       0x0 0x30480044 0x0 0x4>;
+			cdns,phy-input-delay-sd-highspeed = <0x4>;
+			cdns,phy-input-delay-legacy = <0x4>;
+			cdns,phy-input-delay-sd-uhs-sdr50 = <0x6>;
+			cdns,phy-input-delay-sd-uhs-ddr50 = <0x16>;
+			cdns,mmc-ddr-1_8v;
+			status = "disabled";
+		} ;
+
+		pcie@307c2480 {
+			compatible = "pensando,pcie";
+			reg = <0x0 0x307c2480 0x0 0x4   /* MS CFG_WDT */
+			       0x0 0x00001400 0x0 0x10  /* WDT0 */
+			       0x0 0x20000000 0x0 0x00380000>; /* PXB Base */
+		};
+
+		panic: panicdump@0 {
+			compatible = "pensando,pen-crash";
+			status = "disabled";
+		};
+
+		bsm@307c2080 {
+			compatible = "pensando,bsm";
+			reg = <0x0 0x307c2080 0x0 0x4>;
+		};
+	};
+	mnet0: mnet0 {
+		compatible = "pensando,mnet";
+		msi-parent = <&its 0x0>;
+	};
+	mnet1: mnet1 {
+		compatible = "pensando,mnet";
+		msi-parent = <&its 0x1>;
+	};
+	mnet2: mnet2 {
+		compatible = "pensando,mnet";
+		msi-parent = <&its 0x2>;
+	};
+	mnet3: mnet3 {
+		compatible = "pensando,mnet";
+		msi-parent = <&its 0x3>;
+	};
+	mnet4: mnet4 {
+		compatible = "pensando,mnet";
+		msi-parent = <&its 0x4>;
+	};
+	mnet5: mnet5 {
+		compatible = "pensando,mnet";
+		msi-parent = <&its 0x5>;
+	};
+	mnet6: mnet6 {
+		compatible = "pensando,mnet";
+		msi-parent = <&its 0x6>;
+	};
+	mnet7: mnet7 {
+		compatible = "pensando,mnet";
+		msi-parent = <&its 0x7>;
+	};
+	mnet8: mnet8 {
+		compatible = "pensando,mnet";
+		msi-parent = <&its 0x8>;
+	};
+	mnet9: mnet9 {
+		compatible = "pensando,mnet";
+		msi-parent = <&its 0x9>;
+	};
+};
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2021-03-04  3:45 UTC|newest]

Thread overview: 102+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-04  3:41 [PATCH 0/8] Support Pensando Elba SoC Brad Larson
2021-03-04  3:41 ` Brad Larson
2021-03-04  3:41 ` [PATCH 1/8] gpio: Add Elba SoC gpio driver for spi cs control Brad Larson
2021-03-04  3:41   ` Brad Larson
2021-03-04  8:29   ` Linus Walleij
2021-03-04  8:29     ` Linus Walleij
2021-03-04  9:10     ` Serge Semin
2021-03-04  9:10       ` Serge Semin
2021-03-04 13:38       ` Linus Walleij
2021-03-04 13:38         ` Linus Walleij
2021-08-23  1:05         ` Brad Larson
2021-08-23  1:05           ` Brad Larson
2021-08-29 21:09           ` Linus Walleij
2021-08-29 21:09             ` Linus Walleij
2021-10-04 16:46             ` Brad Larson
2021-10-04 16:46               ` Brad Larson
2021-10-12 23:51               ` Linus Walleij
2021-10-12 23:51                 ` Linus Walleij
2021-10-14 20:06                 ` Brad Larson
2021-10-14 20:06                   ` Brad Larson
2021-03-30  2:44     ` Brad Larson
2021-03-30  2:44       ` Brad Larson
2021-08-23  1:05     ` Brad Larson
2021-08-23  1:05       ` Brad Larson
2021-03-04 20:43   ` Elliott, Robert (Servers)
2021-03-04 20:43     ` Elliott, Robert (Servers)
2021-08-23  1:06     ` Brad Larson
2021-08-23  1:06       ` Brad Larson
2021-03-05 11:25   ` Krzysztof Kozlowski
2021-03-05 11:25     ` Krzysztof Kozlowski
2021-08-23  1:07     ` Brad Larson
2021-08-23  1:07       ` Brad Larson
2021-03-05 13:57   ` Geert Uytterhoeven
2021-03-05 13:57     ` Geert Uytterhoeven
2021-08-23  1:08     ` Brad Larson
2021-08-23  1:08       ` Brad Larson
2021-03-07 19:21   ` Andy Shevchenko
2021-03-07 19:21     ` Andy Shevchenko
2021-03-29  1:19     ` Brad Larson
2021-03-29  1:19       ` Brad Larson
2021-03-29 10:39       ` Andy Shevchenko
2021-03-29 10:39         ` Andy Shevchenko
2021-08-23  1:13         ` Brad Larson
2021-08-23  1:13           ` Brad Larson
2021-08-23  7:50           ` Geert Uytterhoeven
2021-08-23  7:50             ` Geert Uytterhoeven
2021-08-23 16:30             ` Brad Larson
2021-08-23 16:30               ` Brad Larson
2021-08-23 20:11               ` Geert Uytterhoeven
2021-08-23 20:11                 ` Geert Uytterhoeven
2021-10-04 17:14                 ` Brad Larson
2021-10-04 17:14                   ` Brad Larson
2021-10-04 17:16                   ` Geert Uytterhoeven
2021-10-04 17:16                     ` Geert Uytterhoeven
2021-08-23  1:10     ` Brad Larson
2021-08-23  1:10       ` Brad Larson
2021-03-04  3:41 ` [PATCH 2/8] spi: cadence-quadspi: Add QSPI support for Pensando Elba SoC Brad Larson
2021-03-04  3:41   ` Brad Larson
2021-03-04  9:29   ` Arnd Bergmann
2021-03-04  9:29     ` Arnd Bergmann
2021-03-04  3:41 ` [PATCH 3/8] spi: dw: Add support for Pensando Elba SoC SPI Brad Larson
2021-03-04  3:41   ` Brad Larson
2021-03-04  6:44   ` Serge Semin
2021-03-04  6:44     ` Serge Semin
2021-08-23  1:17     ` Brad Larson
2021-08-23  1:17       ` Brad Larson
2021-03-04  8:48   ` Linus Walleij
2021-03-04  8:48     ` Linus Walleij
2021-03-10  3:52     ` Brad Larson
2021-03-10  3:52       ` Brad Larson
2021-03-04  3:41 ` [PATCH 4/8] spidev: Add Pensando CPLD compatible Brad Larson
2021-03-04  3:41   ` Brad Larson
2021-03-04  9:33   ` Arnd Bergmann
2021-03-04  9:33     ` Arnd Bergmann
2021-03-04  3:41 ` [PATCH 5/8] mmc: sdhci-cadence: Add Pensando Elba SoC support Brad Larson
2021-03-04  3:41   ` Brad Larson
2021-03-04  9:41   ` Arnd Bergmann
2021-03-04  9:41     ` Arnd Bergmann
2021-03-04  3:41 ` [PATCH 6/8] arm64: Add config for Pensando SoC platforms Brad Larson
2021-03-04  3:41   ` Brad Larson
2021-03-04  9:42   ` Arnd Bergmann
2021-03-04  9:42     ` Arnd Bergmann
2021-03-04  3:41 ` Brad Larson [this message]
2021-03-04  3:41   ` [PATCH 7/8] arm64: dts: Add Pensando Elba SoC support Brad Larson
2021-03-04  8:03   ` Serge Semin
2021-03-04  8:03     ` Serge Semin
2021-03-29  1:07     ` Brad Larson
2021-03-29  1:07       ` Brad Larson
2021-08-23  0:54     ` Brad Larson
2021-08-23  0:54       ` Brad Larson
2021-03-04  8:51   ` Linus Walleij
2021-03-04  8:51     ` Linus Walleij
2021-03-29  0:54     ` Brad Larson
2021-03-29  0:54       ` Brad Larson
2021-03-04  9:06   ` Arnd Bergmann
2021-03-04  9:06     ` Arnd Bergmann
2021-03-04 20:47   ` Rob Herring
2021-03-04 20:47     ` Rob Herring
2021-03-05 11:22   ` Krzysztof Kozlowski
2021-03-05 11:22     ` Krzysztof Kozlowski
2021-03-04  3:41 ` [PATCH 8/8] MAINTAINERS: Add entry for PENSANDO Brad Larson
2021-03-04  3:41   ` Brad Larson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210304034141.7062-8-brad@pensando.io \
    --to=brad@pensando.io \
    --cc=adrian.hunter@intel.com \
    --cc=arnd@arndb.de \
    --cc=bgolaszewski@baylibre.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=fancer.lancer@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=olof@lixom.net \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.