From: "Álvaro Fernández Rojas" <noltari@gmail.com> To: "Linus Walleij" <linus.walleij@linaro.org>, "Rob Herring" <robh+dt@kernel.org>, "Michael Walle" <michael@walle.cc>, "Bartosz Golaszewski" <bgolaszewski@baylibre.com>, "Florian Fainelli" <f.fainelli@gmail.com>, bcm-kernel-feedback-list@broadcom.com, "Álvaro Fernández Rojas" <noltari@gmail.com>, "Jonas Gorski" <jonas.gorski@gmail.com>, "Necip Fazil Yildiran" <fazilyildiran@gmail.com>, "Andy Shevchenko" <andy.shevchenko@gmail.com>, linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v4 11/15] pinctrl: add a pincontrol driver for BCM6368 Date: Thu, 4 Mar 2021 09:57:06 +0100 [thread overview] Message-ID: <20210304085710.7128-12-noltari@gmail.com> (raw) In-Reply-To: <20210304085710.7128-1-noltari@gmail.com> Add a pincontrol driver for BCM6368. BCM6368 allows muxing the first 32 GPIOs onto alternative functions. Not all are documented. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> --- v4: no changes v3: use new shared code v2: switch to GPIO_REGMAP drivers/pinctrl/bcm/Kconfig | 8 + drivers/pinctrl/bcm/Makefile | 1 + drivers/pinctrl/bcm/pinctrl-bcm6368.c | 523 ++++++++++++++++++++++++++ 3 files changed, 532 insertions(+) create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6368.c diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig index d3101d5e750f..aabd4b762aed 100644 --- a/drivers/pinctrl/bcm/Kconfig +++ b/drivers/pinctrl/bcm/Kconfig @@ -60,6 +60,14 @@ config PINCTRL_BCM6362 help Say Y here to enable the Broadcom BCM6362 GPIO driver. +config PINCTRL_BCM6368 + bool "Broadcom BCM6368 GPIO driver" + depends on (BMIPS_GENERIC || COMPILE_TEST) + select PINCTRL_BCM63XX + default BMIPS_GENERIC + help + Say Y here to enable the Broadcom BCM6368 GPIO driver. + config PINCTRL_IPROC_GPIO bool "Broadcom iProc GPIO (with PINCONF) driver" depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST) diff --git a/drivers/pinctrl/bcm/Makefile b/drivers/pinctrl/bcm/Makefile index b9b09e5b914c..a1331bb9680e 100644 --- a/drivers/pinctrl/bcm/Makefile +++ b/drivers/pinctrl/bcm/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o +obj-$(CONFIG_PINCTRL_BCM6368) += pinctrl-bcm6368.o obj-$(CONFIG_PINCTRL_IPROC_GPIO) += pinctrl-iproc-gpio.o obj-$(CONFIG_PINCTRL_CYGNUS_MUX) += pinctrl-cygnus-mux.o obj-$(CONFIG_PINCTRL_NS) += pinctrl-ns.o diff --git a/drivers/pinctrl/bcm/pinctrl-bcm6368.c b/drivers/pinctrl/bcm/pinctrl-bcm6368.c new file mode 100644 index 000000000000..15ce993198e5 --- /dev/null +++ b/drivers/pinctrl/bcm/pinctrl-bcm6368.c @@ -0,0 +1,523 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Driver for BCM6368 GPIO unit (pinctrl + GPIO) + * + * Copyright (C) 2021 Álvaro Fernández Rojas <noltari@gmail.com> + * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com> + */ + +#include <linux/bits.h> +#include <linux/gpio/driver.h> +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/pinctrl/pinmux.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +#include "../pinctrl-utils.h" + +#include "pinctrl-bcm63xx.h" + +#define BCM6368_NUM_GPIOS 38 + +#define BCM6368_MODE_REG 0x18 +#define BCM6368_BASEMODE_REG 0x38 +#define BCM6368_BASEMODE_MASK 0x7 +#define BCM6368_BASEMODE_GPIO 0x0 +#define BCM6368_BASEMODE_UART1 0x1 + +struct bcm6368_pingroup { + const char *name; + const unsigned * const pins; + const unsigned num_pins; +}; + +struct bcm6368_function { + const char *name; + const char * const *groups; + const unsigned num_groups; + + unsigned dir_out:16; + unsigned basemode:3; +}; + +struct bcm6368_priv { + struct regmap_field *overlays; +}; + +#define BCM6368_BASEMODE_PIN(a, b) \ + { \ + .number = a, \ + .name = b, \ + .drv_data = (void *)true \ + } + +static const struct pinctrl_pin_desc bcm6368_pins[] = { + PINCTRL_PIN(0, "gpio0"), + PINCTRL_PIN(1, "gpio1"), + PINCTRL_PIN(2, "gpio2"), + PINCTRL_PIN(3, "gpio3"), + PINCTRL_PIN(4, "gpio4"), + PINCTRL_PIN(5, "gpio5"), + PINCTRL_PIN(6, "gpio6"), + PINCTRL_PIN(7, "gpio7"), + PINCTRL_PIN(8, "gpio8"), + PINCTRL_PIN(9, "gpio9"), + PINCTRL_PIN(10, "gpio10"), + PINCTRL_PIN(11, "gpio11"), + PINCTRL_PIN(12, "gpio12"), + PINCTRL_PIN(13, "gpio13"), + PINCTRL_PIN(14, "gpio14"), + PINCTRL_PIN(15, "gpio15"), + PINCTRL_PIN(16, "gpio16"), + PINCTRL_PIN(17, "gpio17"), + PINCTRL_PIN(18, "gpio18"), + PINCTRL_PIN(19, "gpio19"), + PINCTRL_PIN(20, "gpio20"), + PINCTRL_PIN(21, "gpio21"), + PINCTRL_PIN(22, "gpio22"), + PINCTRL_PIN(23, "gpio23"), + PINCTRL_PIN(24, "gpio24"), + PINCTRL_PIN(25, "gpio25"), + PINCTRL_PIN(26, "gpio26"), + PINCTRL_PIN(27, "gpio27"), + PINCTRL_PIN(28, "gpio28"), + PINCTRL_PIN(29, "gpio29"), + BCM6368_BASEMODE_PIN(30, "gpio30"), + BCM6368_BASEMODE_PIN(31, "gpio31"), + BCM6368_BASEMODE_PIN(32, "gpio32"), + BCM6368_BASEMODE_PIN(33, "gpio33"), + PINCTRL_PIN(34, "gpio34"), + PINCTRL_PIN(35, "gpio35"), + PINCTRL_PIN(36, "gpio36"), + PINCTRL_PIN(37, "gpio37"), +}; + +static unsigned gpio0_pins[] = { 0 }; +static unsigned gpio1_pins[] = { 1 }; +static unsigned gpio2_pins[] = { 2 }; +static unsigned gpio3_pins[] = { 3 }; +static unsigned gpio4_pins[] = { 4 }; +static unsigned gpio5_pins[] = { 5 }; +static unsigned gpio6_pins[] = { 6 }; +static unsigned gpio7_pins[] = { 7 }; +static unsigned gpio8_pins[] = { 8 }; +static unsigned gpio9_pins[] = { 9 }; +static unsigned gpio10_pins[] = { 10 }; +static unsigned gpio11_pins[] = { 11 }; +static unsigned gpio12_pins[] = { 12 }; +static unsigned gpio13_pins[] = { 13 }; +static unsigned gpio14_pins[] = { 14 }; +static unsigned gpio15_pins[] = { 15 }; +static unsigned gpio16_pins[] = { 16 }; +static unsigned gpio17_pins[] = { 17 }; +static unsigned gpio18_pins[] = { 18 }; +static unsigned gpio19_pins[] = { 19 }; +static unsigned gpio20_pins[] = { 20 }; +static unsigned gpio21_pins[] = { 21 }; +static unsigned gpio22_pins[] = { 22 }; +static unsigned gpio23_pins[] = { 23 }; +static unsigned gpio24_pins[] = { 24 }; +static unsigned gpio25_pins[] = { 25 }; +static unsigned gpio26_pins[] = { 26 }; +static unsigned gpio27_pins[] = { 27 }; +static unsigned gpio28_pins[] = { 28 }; +static unsigned gpio29_pins[] = { 29 }; +static unsigned gpio30_pins[] = { 30 }; +static unsigned gpio31_pins[] = { 31 }; +static unsigned uart1_grp_pins[] = { 30, 31, 32, 33 }; + +#define BCM6368_GROUP(n) \ + { \ + .name = #n, \ + .pins = n##_pins, \ + .num_pins = ARRAY_SIZE(n##_pins), \ + } + +static struct bcm6368_pingroup bcm6368_groups[] = { + BCM6368_GROUP(gpio0), + BCM6368_GROUP(gpio1), + BCM6368_GROUP(gpio2), + BCM6368_GROUP(gpio3), + BCM6368_GROUP(gpio4), + BCM6368_GROUP(gpio5), + BCM6368_GROUP(gpio6), + BCM6368_GROUP(gpio7), + BCM6368_GROUP(gpio8), + BCM6368_GROUP(gpio9), + BCM6368_GROUP(gpio10), + BCM6368_GROUP(gpio11), + BCM6368_GROUP(gpio12), + BCM6368_GROUP(gpio13), + BCM6368_GROUP(gpio14), + BCM6368_GROUP(gpio15), + BCM6368_GROUP(gpio16), + BCM6368_GROUP(gpio17), + BCM6368_GROUP(gpio18), + BCM6368_GROUP(gpio19), + BCM6368_GROUP(gpio20), + BCM6368_GROUP(gpio21), + BCM6368_GROUP(gpio22), + BCM6368_GROUP(gpio23), + BCM6368_GROUP(gpio24), + BCM6368_GROUP(gpio25), + BCM6368_GROUP(gpio26), + BCM6368_GROUP(gpio27), + BCM6368_GROUP(gpio28), + BCM6368_GROUP(gpio29), + BCM6368_GROUP(gpio30), + BCM6368_GROUP(gpio31), + BCM6368_GROUP(uart1_grp), +}; + +static const char * const analog_afe_0_groups[] = { + "gpio0", +}; + +static const char * const analog_afe_1_groups[] = { + "gpio1", +}; + +static const char * const sys_irq_groups[] = { + "gpio2", +}; + +static const char * const serial_led_data_groups[] = { + "gpio3", +}; + +static const char * const serial_led_clk_groups[] = { + "gpio4", +}; + +static const char * const inet_led_groups[] = { + "gpio5", +}; + +static const char * const ephy0_led_groups[] = { + "gpio6", +}; + +static const char * const ephy1_led_groups[] = { + "gpio7", +}; + +static const char * const ephy2_led_groups[] = { + "gpio8", +}; + +static const char * const ephy3_led_groups[] = { + "gpio9", +}; + +static const char * const robosw_led_data_groups[] = { + "gpio10", +}; + +static const char * const robosw_led_clk_groups[] = { + "gpio11", +}; + +static const char * const robosw_led0_groups[] = { + "gpio12", +}; + +static const char * const robosw_led1_groups[] = { + "gpio13", +}; + +static const char * const usb_device_led_groups[] = { + "gpio14", +}; + +static const char * const pci_req1_groups[] = { + "gpio16", +}; + +static const char * const pci_gnt1_groups[] = { + "gpio17", +}; + +static const char * const pci_intb_groups[] = { + "gpio18", +}; + +static const char * const pci_req0_groups[] = { + "gpio19", +}; + +static const char * const pci_gnt0_groups[] = { + "gpio20", +}; + +static const char * const pcmcia_cd1_groups[] = { + "gpio22", +}; + +static const char * const pcmcia_cd2_groups[] = { + "gpio23", +}; + +static const char * const pcmcia_vs1_groups[] = { + "gpio24", +}; + +static const char * const pcmcia_vs2_groups[] = { + "gpio25", +}; + +static const char * const ebi_cs2_groups[] = { + "gpio26", +}; + +static const char * const ebi_cs3_groups[] = { + "gpio27", +}; + +static const char * const spi_cs2_groups[] = { + "gpio28", +}; + +static const char * const spi_cs3_groups[] = { + "gpio29", +}; + +static const char * const spi_cs4_groups[] = { + "gpio30", +}; + +static const char * const spi_cs5_groups[] = { + "gpio31", +}; + +static const char * const uart1_groups[] = { + "uart1_grp", +}; + +#define BCM6368_FUN(n, out) \ + { \ + .name = #n, \ + .groups = n##_groups, \ + .num_groups = ARRAY_SIZE(n##_groups), \ + .dir_out = out, \ + } + +#define BCM6368_BASEMODE_FUN(n, val, out) \ + { \ + .name = #n, \ + .groups = n##_groups, \ + .num_groups = ARRAY_SIZE(n##_groups), \ + .basemode = BCM6368_BASEMODE_##val, \ + .dir_out = out, \ + } + +static const struct bcm6368_function bcm6368_funcs[] = { + BCM6368_FUN(analog_afe_0, 1), + BCM6368_FUN(analog_afe_1, 1), + BCM6368_FUN(sys_irq, 1), + BCM6368_FUN(serial_led_data, 1), + BCM6368_FUN(serial_led_clk, 1), + BCM6368_FUN(inet_led, 1), + BCM6368_FUN(ephy0_led, 1), + BCM6368_FUN(ephy1_led, 1), + BCM6368_FUN(ephy2_led, 1), + BCM6368_FUN(ephy3_led, 1), + BCM6368_FUN(robosw_led_data, 1), + BCM6368_FUN(robosw_led_clk, 1), + BCM6368_FUN(robosw_led0, 1), + BCM6368_FUN(robosw_led1, 1), + BCM6368_FUN(usb_device_led, 1), + BCM6368_FUN(pci_req1, 0), + BCM6368_FUN(pci_gnt1, 0), + BCM6368_FUN(pci_intb, 0), + BCM6368_FUN(pci_req0, 0), + BCM6368_FUN(pci_gnt0, 0), + BCM6368_FUN(pcmcia_cd1, 0), + BCM6368_FUN(pcmcia_cd2, 0), + BCM6368_FUN(pcmcia_vs1, 0), + BCM6368_FUN(pcmcia_vs2, 0), + BCM6368_FUN(ebi_cs2, 1), + BCM6368_FUN(ebi_cs3, 1), + BCM6368_FUN(spi_cs2, 1), + BCM6368_FUN(spi_cs3, 1), + BCM6368_FUN(spi_cs4, 1), + BCM6368_FUN(spi_cs5, 1), + BCM6368_BASEMODE_FUN(uart1, UART1, 0x6), +}; + +static int bcm6368_pinctrl_get_group_count(struct pinctrl_dev *pctldev) +{ + return ARRAY_SIZE(bcm6368_groups); +} + +static const char *bcm6368_pinctrl_get_group_name(struct pinctrl_dev *pctldev, + unsigned group) +{ + return bcm6368_groups[group].name; +} + +static int bcm6368_pinctrl_get_group_pins(struct pinctrl_dev *pctldev, + unsigned group, const unsigned **pins, + unsigned *num_pins) +{ + *pins = bcm6368_groups[group].pins; + *num_pins = bcm6368_groups[group].num_pins; + + return 0; +} + +static int bcm6368_pinctrl_get_func_count(struct pinctrl_dev *pctldev) +{ + return ARRAY_SIZE(bcm6368_funcs); +} + +static const char *bcm6368_pinctrl_get_func_name(struct pinctrl_dev *pctldev, + unsigned selector) +{ + return bcm6368_funcs[selector].name; +} + +static int bcm6368_pinctrl_get_groups(struct pinctrl_dev *pctldev, + unsigned selector, + const char * const **groups, + unsigned * const num_groups) +{ + *groups = bcm6368_funcs[selector].groups; + *num_groups = bcm6368_funcs[selector].num_groups; + + return 0; +} + +static int bcm6368_pinctrl_set_mux(struct pinctrl_dev *pctldev, + unsigned selector, unsigned group) +{ + struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); + struct bcm6368_priv *priv = pc->driver_data; + const struct bcm6368_pingroup *pg = &bcm6368_groups[group]; + const struct bcm6368_function *fun = &bcm6368_funcs[selector]; + int i, pin; + + if (fun->basemode) { + unsigned int mask = 0; + + for (i = 0; i < pg->num_pins; i++) { + pin = pg->pins[i]; + if (pin < BCM63XX_BANK_GPIOS) + mask |= BIT(pin); + } + + regmap_update_bits(pc->regs, BCM6368_MODE_REG, mask, 0); + regmap_field_write(priv->overlays, fun->basemode); + } else { + pin = pg->pins[0]; + + if (bcm6368_pins[pin].drv_data) + regmap_field_write(priv->overlays, + BCM6368_BASEMODE_GPIO); + + regmap_update_bits(pc->regs, BCM6368_MODE_REG, BIT(pin), + BIT(pin)); + } + + for (pin = 0; pin < pg->num_pins; pin++) { + struct pinctrl_gpio_range *range; + int hw_gpio = bcm6368_pins[pin].number; + + range = pinctrl_find_gpio_range_from_pin(pctldev, hw_gpio); + if (range) { + struct gpio_chip *gc = range->gc; + + if (fun->dir_out & BIT(pin)) + gc->direction_output(gc, hw_gpio, 0); + else + gc->direction_input(gc, hw_gpio); + } + } + + return 0; +} + +static int bcm6368_gpio_request_enable(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned offset) +{ + struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); + struct bcm6368_priv *priv = pc->driver_data; + + if (offset >= BCM63XX_BANK_GPIOS && !bcm6368_pins[offset].drv_data) + return 0; + + /* disable all functions using this pin */ + if (offset < BCM63XX_BANK_GPIOS) + regmap_update_bits(pc->regs, BCM6368_MODE_REG, BIT(offset), 0); + + if (bcm6368_pins[offset].drv_data) + regmap_field_write(priv->overlays, BCM6368_BASEMODE_GPIO); + + return 0; +} + +static struct pinctrl_ops bcm6368_pctl_ops = { + .get_groups_count = bcm6368_pinctrl_get_group_count, + .get_group_name = bcm6368_pinctrl_get_group_name, + .get_group_pins = bcm6368_pinctrl_get_group_pins, + .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, + .dt_free_map = pinctrl_utils_free_map, +}; + +static struct pinmux_ops bcm6368_pmx_ops = { + .get_functions_count = bcm6368_pinctrl_get_func_count, + .get_function_name = bcm6368_pinctrl_get_func_name, + .get_function_groups = bcm6368_pinctrl_get_groups, + .set_mux = bcm6368_pinctrl_set_mux, + .gpio_request_enable = bcm6368_gpio_request_enable, + .strict = true, +}; + +static const struct bcm63xx_pinctrl_soc bcm6368_soc = { + .ngpios = BCM6368_NUM_GPIOS, + .npins = ARRAY_SIZE(bcm6368_pins), + .pctl_ops = &bcm6368_pctl_ops, + .pins = bcm6368_pins, + .pmx_ops = &bcm6368_pmx_ops, +}; + +static int bcm6368_pinctrl_probe(struct platform_device *pdev) +{ + struct reg_field overlays = REG_FIELD(BCM6368_BASEMODE_REG, 0, 15); + struct device *dev = &pdev->dev; + struct bcm63xx_pinctrl *pc; + struct bcm6368_priv *priv; + int err; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + err = bcm63xx_pinctrl_probe(pdev, &bcm6368_soc, (void *) priv); + if (err) + return err; + + pc = platform_get_drvdata(pdev); + + priv->overlays = devm_regmap_field_alloc(dev, pc->regs, overlays); + if (IS_ERR(priv->overlays)) + return PTR_ERR(priv->overlays); + + return 0; +} + +static const struct of_device_id bcm6368_pinctrl_match[] = { + { .compatible = "brcm,bcm6368-pinctrl", }, + { }, +}; + +static struct platform_driver bcm6368_pinctrl_driver = { + .probe = bcm6368_pinctrl_probe, + .driver = { + .name = "bcm6368-pinctrl", + .of_match_table = bcm6368_pinctrl_match, + }, +}; + +builtin_platform_driver(bcm6368_pinctrl_driver); -- 2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: "Álvaro Fernández Rojas" <noltari@gmail.com> To: "Linus Walleij" <linus.walleij@linaro.org>, "Rob Herring" <robh+dt@kernel.org>, "Michael Walle" <michael@walle.cc>, "Bartosz Golaszewski" <bgolaszewski@baylibre.com>, "Florian Fainelli" <f.fainelli@gmail.com>, bcm-kernel-feedback-list@broadcom.com, "Álvaro Fernández Rojas" <noltari@gmail.com>, "Jonas Gorski" <jonas.gorski@gmail.com>, "Necip Fazil Yildiran" <fazilyildiran@gmail.com>, "Andy Shevchenko" <andy.shevchenko@gmail.com>, linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v4 11/15] pinctrl: add a pincontrol driver for BCM6368 Date: Thu, 4 Mar 2021 09:57:06 +0100 [thread overview] Message-ID: <20210304085710.7128-12-noltari@gmail.com> (raw) In-Reply-To: <20210304085710.7128-1-noltari@gmail.com> Add a pincontrol driver for BCM6368. BCM6368 allows muxing the first 32 GPIOs onto alternative functions. Not all are documented. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> --- v4: no changes v3: use new shared code v2: switch to GPIO_REGMAP drivers/pinctrl/bcm/Kconfig | 8 + drivers/pinctrl/bcm/Makefile | 1 + drivers/pinctrl/bcm/pinctrl-bcm6368.c | 523 ++++++++++++++++++++++++++ 3 files changed, 532 insertions(+) create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm6368.c diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig index d3101d5e750f..aabd4b762aed 100644 --- a/drivers/pinctrl/bcm/Kconfig +++ b/drivers/pinctrl/bcm/Kconfig @@ -60,6 +60,14 @@ config PINCTRL_BCM6362 help Say Y here to enable the Broadcom BCM6362 GPIO driver. +config PINCTRL_BCM6368 + bool "Broadcom BCM6368 GPIO driver" + depends on (BMIPS_GENERIC || COMPILE_TEST) + select PINCTRL_BCM63XX + default BMIPS_GENERIC + help + Say Y here to enable the Broadcom BCM6368 GPIO driver. + config PINCTRL_IPROC_GPIO bool "Broadcom iProc GPIO (with PINCONF) driver" depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST) diff --git a/drivers/pinctrl/bcm/Makefile b/drivers/pinctrl/bcm/Makefile index b9b09e5b914c..a1331bb9680e 100644 --- a/drivers/pinctrl/bcm/Makefile +++ b/drivers/pinctrl/bcm/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o obj-$(CONFIG_PINCTRL_BCM6362) += pinctrl-bcm6362.o +obj-$(CONFIG_PINCTRL_BCM6368) += pinctrl-bcm6368.o obj-$(CONFIG_PINCTRL_IPROC_GPIO) += pinctrl-iproc-gpio.o obj-$(CONFIG_PINCTRL_CYGNUS_MUX) += pinctrl-cygnus-mux.o obj-$(CONFIG_PINCTRL_NS) += pinctrl-ns.o diff --git a/drivers/pinctrl/bcm/pinctrl-bcm6368.c b/drivers/pinctrl/bcm/pinctrl-bcm6368.c new file mode 100644 index 000000000000..15ce993198e5 --- /dev/null +++ b/drivers/pinctrl/bcm/pinctrl-bcm6368.c @@ -0,0 +1,523 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Driver for BCM6368 GPIO unit (pinctrl + GPIO) + * + * Copyright (C) 2021 Álvaro Fernández Rojas <noltari@gmail.com> + * Copyright (C) 2016 Jonas Gorski <jonas.gorski@gmail.com> + */ + +#include <linux/bits.h> +#include <linux/gpio/driver.h> +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/pinctrl/pinmux.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +#include "../pinctrl-utils.h" + +#include "pinctrl-bcm63xx.h" + +#define BCM6368_NUM_GPIOS 38 + +#define BCM6368_MODE_REG 0x18 +#define BCM6368_BASEMODE_REG 0x38 +#define BCM6368_BASEMODE_MASK 0x7 +#define BCM6368_BASEMODE_GPIO 0x0 +#define BCM6368_BASEMODE_UART1 0x1 + +struct bcm6368_pingroup { + const char *name; + const unsigned * const pins; + const unsigned num_pins; +}; + +struct bcm6368_function { + const char *name; + const char * const *groups; + const unsigned num_groups; + + unsigned dir_out:16; + unsigned basemode:3; +}; + +struct bcm6368_priv { + struct regmap_field *overlays; +}; + +#define BCM6368_BASEMODE_PIN(a, b) \ + { \ + .number = a, \ + .name = b, \ + .drv_data = (void *)true \ + } + +static const struct pinctrl_pin_desc bcm6368_pins[] = { + PINCTRL_PIN(0, "gpio0"), + PINCTRL_PIN(1, "gpio1"), + PINCTRL_PIN(2, "gpio2"), + PINCTRL_PIN(3, "gpio3"), + PINCTRL_PIN(4, "gpio4"), + PINCTRL_PIN(5, "gpio5"), + PINCTRL_PIN(6, "gpio6"), + PINCTRL_PIN(7, "gpio7"), + PINCTRL_PIN(8, "gpio8"), + PINCTRL_PIN(9, "gpio9"), + PINCTRL_PIN(10, "gpio10"), + PINCTRL_PIN(11, "gpio11"), + PINCTRL_PIN(12, "gpio12"), + PINCTRL_PIN(13, "gpio13"), + PINCTRL_PIN(14, "gpio14"), + PINCTRL_PIN(15, "gpio15"), + PINCTRL_PIN(16, "gpio16"), + PINCTRL_PIN(17, "gpio17"), + PINCTRL_PIN(18, "gpio18"), + PINCTRL_PIN(19, "gpio19"), + PINCTRL_PIN(20, "gpio20"), + PINCTRL_PIN(21, "gpio21"), + PINCTRL_PIN(22, "gpio22"), + PINCTRL_PIN(23, "gpio23"), + PINCTRL_PIN(24, "gpio24"), + PINCTRL_PIN(25, "gpio25"), + PINCTRL_PIN(26, "gpio26"), + PINCTRL_PIN(27, "gpio27"), + PINCTRL_PIN(28, "gpio28"), + PINCTRL_PIN(29, "gpio29"), + BCM6368_BASEMODE_PIN(30, "gpio30"), + BCM6368_BASEMODE_PIN(31, "gpio31"), + BCM6368_BASEMODE_PIN(32, "gpio32"), + BCM6368_BASEMODE_PIN(33, "gpio33"), + PINCTRL_PIN(34, "gpio34"), + PINCTRL_PIN(35, "gpio35"), + PINCTRL_PIN(36, "gpio36"), + PINCTRL_PIN(37, "gpio37"), +}; + +static unsigned gpio0_pins[] = { 0 }; +static unsigned gpio1_pins[] = { 1 }; +static unsigned gpio2_pins[] = { 2 }; +static unsigned gpio3_pins[] = { 3 }; +static unsigned gpio4_pins[] = { 4 }; +static unsigned gpio5_pins[] = { 5 }; +static unsigned gpio6_pins[] = { 6 }; +static unsigned gpio7_pins[] = { 7 }; +static unsigned gpio8_pins[] = { 8 }; +static unsigned gpio9_pins[] = { 9 }; +static unsigned gpio10_pins[] = { 10 }; +static unsigned gpio11_pins[] = { 11 }; +static unsigned gpio12_pins[] = { 12 }; +static unsigned gpio13_pins[] = { 13 }; +static unsigned gpio14_pins[] = { 14 }; +static unsigned gpio15_pins[] = { 15 }; +static unsigned gpio16_pins[] = { 16 }; +static unsigned gpio17_pins[] = { 17 }; +static unsigned gpio18_pins[] = { 18 }; +static unsigned gpio19_pins[] = { 19 }; +static unsigned gpio20_pins[] = { 20 }; +static unsigned gpio21_pins[] = { 21 }; +static unsigned gpio22_pins[] = { 22 }; +static unsigned gpio23_pins[] = { 23 }; +static unsigned gpio24_pins[] = { 24 }; +static unsigned gpio25_pins[] = { 25 }; +static unsigned gpio26_pins[] = { 26 }; +static unsigned gpio27_pins[] = { 27 }; +static unsigned gpio28_pins[] = { 28 }; +static unsigned gpio29_pins[] = { 29 }; +static unsigned gpio30_pins[] = { 30 }; +static unsigned gpio31_pins[] = { 31 }; +static unsigned uart1_grp_pins[] = { 30, 31, 32, 33 }; + +#define BCM6368_GROUP(n) \ + { \ + .name = #n, \ + .pins = n##_pins, \ + .num_pins = ARRAY_SIZE(n##_pins), \ + } + +static struct bcm6368_pingroup bcm6368_groups[] = { + BCM6368_GROUP(gpio0), + BCM6368_GROUP(gpio1), + BCM6368_GROUP(gpio2), + BCM6368_GROUP(gpio3), + BCM6368_GROUP(gpio4), + BCM6368_GROUP(gpio5), + BCM6368_GROUP(gpio6), + BCM6368_GROUP(gpio7), + BCM6368_GROUP(gpio8), + BCM6368_GROUP(gpio9), + BCM6368_GROUP(gpio10), + BCM6368_GROUP(gpio11), + BCM6368_GROUP(gpio12), + BCM6368_GROUP(gpio13), + BCM6368_GROUP(gpio14), + BCM6368_GROUP(gpio15), + BCM6368_GROUP(gpio16), + BCM6368_GROUP(gpio17), + BCM6368_GROUP(gpio18), + BCM6368_GROUP(gpio19), + BCM6368_GROUP(gpio20), + BCM6368_GROUP(gpio21), + BCM6368_GROUP(gpio22), + BCM6368_GROUP(gpio23), + BCM6368_GROUP(gpio24), + BCM6368_GROUP(gpio25), + BCM6368_GROUP(gpio26), + BCM6368_GROUP(gpio27), + BCM6368_GROUP(gpio28), + BCM6368_GROUP(gpio29), + BCM6368_GROUP(gpio30), + BCM6368_GROUP(gpio31), + BCM6368_GROUP(uart1_grp), +}; + +static const char * const analog_afe_0_groups[] = { + "gpio0", +}; + +static const char * const analog_afe_1_groups[] = { + "gpio1", +}; + +static const char * const sys_irq_groups[] = { + "gpio2", +}; + +static const char * const serial_led_data_groups[] = { + "gpio3", +}; + +static const char * const serial_led_clk_groups[] = { + "gpio4", +}; + +static const char * const inet_led_groups[] = { + "gpio5", +}; + +static const char * const ephy0_led_groups[] = { + "gpio6", +}; + +static const char * const ephy1_led_groups[] = { + "gpio7", +}; + +static const char * const ephy2_led_groups[] = { + "gpio8", +}; + +static const char * const ephy3_led_groups[] = { + "gpio9", +}; + +static const char * const robosw_led_data_groups[] = { + "gpio10", +}; + +static const char * const robosw_led_clk_groups[] = { + "gpio11", +}; + +static const char * const robosw_led0_groups[] = { + "gpio12", +}; + +static const char * const robosw_led1_groups[] = { + "gpio13", +}; + +static const char * const usb_device_led_groups[] = { + "gpio14", +}; + +static const char * const pci_req1_groups[] = { + "gpio16", +}; + +static const char * const pci_gnt1_groups[] = { + "gpio17", +}; + +static const char * const pci_intb_groups[] = { + "gpio18", +}; + +static const char * const pci_req0_groups[] = { + "gpio19", +}; + +static const char * const pci_gnt0_groups[] = { + "gpio20", +}; + +static const char * const pcmcia_cd1_groups[] = { + "gpio22", +}; + +static const char * const pcmcia_cd2_groups[] = { + "gpio23", +}; + +static const char * const pcmcia_vs1_groups[] = { + "gpio24", +}; + +static const char * const pcmcia_vs2_groups[] = { + "gpio25", +}; + +static const char * const ebi_cs2_groups[] = { + "gpio26", +}; + +static const char * const ebi_cs3_groups[] = { + "gpio27", +}; + +static const char * const spi_cs2_groups[] = { + "gpio28", +}; + +static const char * const spi_cs3_groups[] = { + "gpio29", +}; + +static const char * const spi_cs4_groups[] = { + "gpio30", +}; + +static const char * const spi_cs5_groups[] = { + "gpio31", +}; + +static const char * const uart1_groups[] = { + "uart1_grp", +}; + +#define BCM6368_FUN(n, out) \ + { \ + .name = #n, \ + .groups = n##_groups, \ + .num_groups = ARRAY_SIZE(n##_groups), \ + .dir_out = out, \ + } + +#define BCM6368_BASEMODE_FUN(n, val, out) \ + { \ + .name = #n, \ + .groups = n##_groups, \ + .num_groups = ARRAY_SIZE(n##_groups), \ + .basemode = BCM6368_BASEMODE_##val, \ + .dir_out = out, \ + } + +static const struct bcm6368_function bcm6368_funcs[] = { + BCM6368_FUN(analog_afe_0, 1), + BCM6368_FUN(analog_afe_1, 1), + BCM6368_FUN(sys_irq, 1), + BCM6368_FUN(serial_led_data, 1), + BCM6368_FUN(serial_led_clk, 1), + BCM6368_FUN(inet_led, 1), + BCM6368_FUN(ephy0_led, 1), + BCM6368_FUN(ephy1_led, 1), + BCM6368_FUN(ephy2_led, 1), + BCM6368_FUN(ephy3_led, 1), + BCM6368_FUN(robosw_led_data, 1), + BCM6368_FUN(robosw_led_clk, 1), + BCM6368_FUN(robosw_led0, 1), + BCM6368_FUN(robosw_led1, 1), + BCM6368_FUN(usb_device_led, 1), + BCM6368_FUN(pci_req1, 0), + BCM6368_FUN(pci_gnt1, 0), + BCM6368_FUN(pci_intb, 0), + BCM6368_FUN(pci_req0, 0), + BCM6368_FUN(pci_gnt0, 0), + BCM6368_FUN(pcmcia_cd1, 0), + BCM6368_FUN(pcmcia_cd2, 0), + BCM6368_FUN(pcmcia_vs1, 0), + BCM6368_FUN(pcmcia_vs2, 0), + BCM6368_FUN(ebi_cs2, 1), + BCM6368_FUN(ebi_cs3, 1), + BCM6368_FUN(spi_cs2, 1), + BCM6368_FUN(spi_cs3, 1), + BCM6368_FUN(spi_cs4, 1), + BCM6368_FUN(spi_cs5, 1), + BCM6368_BASEMODE_FUN(uart1, UART1, 0x6), +}; + +static int bcm6368_pinctrl_get_group_count(struct pinctrl_dev *pctldev) +{ + return ARRAY_SIZE(bcm6368_groups); +} + +static const char *bcm6368_pinctrl_get_group_name(struct pinctrl_dev *pctldev, + unsigned group) +{ + return bcm6368_groups[group].name; +} + +static int bcm6368_pinctrl_get_group_pins(struct pinctrl_dev *pctldev, + unsigned group, const unsigned **pins, + unsigned *num_pins) +{ + *pins = bcm6368_groups[group].pins; + *num_pins = bcm6368_groups[group].num_pins; + + return 0; +} + +static int bcm6368_pinctrl_get_func_count(struct pinctrl_dev *pctldev) +{ + return ARRAY_SIZE(bcm6368_funcs); +} + +static const char *bcm6368_pinctrl_get_func_name(struct pinctrl_dev *pctldev, + unsigned selector) +{ + return bcm6368_funcs[selector].name; +} + +static int bcm6368_pinctrl_get_groups(struct pinctrl_dev *pctldev, + unsigned selector, + const char * const **groups, + unsigned * const num_groups) +{ + *groups = bcm6368_funcs[selector].groups; + *num_groups = bcm6368_funcs[selector].num_groups; + + return 0; +} + +static int bcm6368_pinctrl_set_mux(struct pinctrl_dev *pctldev, + unsigned selector, unsigned group) +{ + struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); + struct bcm6368_priv *priv = pc->driver_data; + const struct bcm6368_pingroup *pg = &bcm6368_groups[group]; + const struct bcm6368_function *fun = &bcm6368_funcs[selector]; + int i, pin; + + if (fun->basemode) { + unsigned int mask = 0; + + for (i = 0; i < pg->num_pins; i++) { + pin = pg->pins[i]; + if (pin < BCM63XX_BANK_GPIOS) + mask |= BIT(pin); + } + + regmap_update_bits(pc->regs, BCM6368_MODE_REG, mask, 0); + regmap_field_write(priv->overlays, fun->basemode); + } else { + pin = pg->pins[0]; + + if (bcm6368_pins[pin].drv_data) + regmap_field_write(priv->overlays, + BCM6368_BASEMODE_GPIO); + + regmap_update_bits(pc->regs, BCM6368_MODE_REG, BIT(pin), + BIT(pin)); + } + + for (pin = 0; pin < pg->num_pins; pin++) { + struct pinctrl_gpio_range *range; + int hw_gpio = bcm6368_pins[pin].number; + + range = pinctrl_find_gpio_range_from_pin(pctldev, hw_gpio); + if (range) { + struct gpio_chip *gc = range->gc; + + if (fun->dir_out & BIT(pin)) + gc->direction_output(gc, hw_gpio, 0); + else + gc->direction_input(gc, hw_gpio); + } + } + + return 0; +} + +static int bcm6368_gpio_request_enable(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned offset) +{ + struct bcm63xx_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); + struct bcm6368_priv *priv = pc->driver_data; + + if (offset >= BCM63XX_BANK_GPIOS && !bcm6368_pins[offset].drv_data) + return 0; + + /* disable all functions using this pin */ + if (offset < BCM63XX_BANK_GPIOS) + regmap_update_bits(pc->regs, BCM6368_MODE_REG, BIT(offset), 0); + + if (bcm6368_pins[offset].drv_data) + regmap_field_write(priv->overlays, BCM6368_BASEMODE_GPIO); + + return 0; +} + +static struct pinctrl_ops bcm6368_pctl_ops = { + .get_groups_count = bcm6368_pinctrl_get_group_count, + .get_group_name = bcm6368_pinctrl_get_group_name, + .get_group_pins = bcm6368_pinctrl_get_group_pins, + .dt_node_to_map = pinconf_generic_dt_node_to_map_pin, + .dt_free_map = pinctrl_utils_free_map, +}; + +static struct pinmux_ops bcm6368_pmx_ops = { + .get_functions_count = bcm6368_pinctrl_get_func_count, + .get_function_name = bcm6368_pinctrl_get_func_name, + .get_function_groups = bcm6368_pinctrl_get_groups, + .set_mux = bcm6368_pinctrl_set_mux, + .gpio_request_enable = bcm6368_gpio_request_enable, + .strict = true, +}; + +static const struct bcm63xx_pinctrl_soc bcm6368_soc = { + .ngpios = BCM6368_NUM_GPIOS, + .npins = ARRAY_SIZE(bcm6368_pins), + .pctl_ops = &bcm6368_pctl_ops, + .pins = bcm6368_pins, + .pmx_ops = &bcm6368_pmx_ops, +}; + +static int bcm6368_pinctrl_probe(struct platform_device *pdev) +{ + struct reg_field overlays = REG_FIELD(BCM6368_BASEMODE_REG, 0, 15); + struct device *dev = &pdev->dev; + struct bcm63xx_pinctrl *pc; + struct bcm6368_priv *priv; + int err; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + err = bcm63xx_pinctrl_probe(pdev, &bcm6368_soc, (void *) priv); + if (err) + return err; + + pc = platform_get_drvdata(pdev); + + priv->overlays = devm_regmap_field_alloc(dev, pc->regs, overlays); + if (IS_ERR(priv->overlays)) + return PTR_ERR(priv->overlays); + + return 0; +} + +static const struct of_device_id bcm6368_pinctrl_match[] = { + { .compatible = "brcm,bcm6368-pinctrl", }, + { }, +}; + +static struct platform_driver bcm6368_pinctrl_driver = { + .probe = bcm6368_pinctrl_probe, + .driver = { + .name = "bcm6368-pinctrl", + .of_match_table = bcm6368_pinctrl_match, + }, +}; + +builtin_platform_driver(bcm6368_pinctrl_driver); -- 2.20.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-03-04 8:59 UTC|newest] Thread overview: 88+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-03-04 8:56 [PATCH v4 00/15] pinctrl: add BCM63XX pincontrol support Álvaro Fernández Rojas 2021-03-04 8:56 ` Álvaro Fernández Rojas 2021-03-04 8:56 ` [PATCH v4 01/15] gpio: guard gpiochip_irqchip_add_domain() with GPIOLIB_IRQCHIP Álvaro Fernández Rojas 2021-03-04 8:56 ` Álvaro Fernández Rojas 2021-03-04 10:33 ` Andy Shevchenko 2021-03-04 10:33 ` Andy Shevchenko 2021-03-04 10:36 ` Álvaro Fernández Rojas 2021-03-04 10:36 ` Álvaro Fernández Rojas 2021-03-09 16:20 ` Linus Walleij 2021-03-09 16:20 ` Linus Walleij 2021-03-04 8:56 ` [PATCH v4 02/15] gpio: regmap: set gpio_chip of_node Álvaro Fernández Rojas 2021-03-04 8:56 ` Álvaro Fernández Rojas 2021-03-04 10:35 ` Andy Shevchenko 2021-03-04 10:35 ` Andy Shevchenko 2021-03-04 15:06 ` Álvaro Fernández Rojas 2021-03-04 15:06 ` Álvaro Fernández Rojas 2021-03-04 15:17 ` Andy Shevchenko 2021-03-04 15:17 ` Andy Shevchenko 2021-03-04 15:24 ` Álvaro Fernández Rojas 2021-03-04 15:24 ` Álvaro Fernández Rojas 2021-03-04 15:28 ` Andy Shevchenko 2021-03-04 15:28 ` Andy Shevchenko 2021-03-04 15:44 ` Álvaro Fernández Rojas 2021-03-04 15:44 ` Álvaro Fernández Rojas 2021-03-04 16:33 ` Andy Shevchenko 2021-03-04 16:33 ` Andy Shevchenko 2021-03-04 16:46 ` Andy Shevchenko 2021-03-04 16:46 ` Andy Shevchenko 2021-03-04 17:24 ` Michael Walle 2021-03-04 17:24 ` Michael Walle 2021-03-05 9:44 ` Andy Shevchenko 2021-03-05 9:44 ` Andy Shevchenko 2021-03-05 7:45 ` Álvaro Fernández Rojas 2021-03-05 7:45 ` Álvaro Fernández Rojas 2021-03-05 9:49 ` Andy Shevchenko 2021-03-05 9:49 ` Andy Shevchenko 2021-03-04 8:56 ` [PATCH v4 03/15] pinctrl: bcm: add bcm63xx base code Álvaro Fernández Rojas 2021-03-04 8:56 ` Álvaro Fernández Rojas 2021-03-04 10:43 ` Andy Shevchenko 2021-03-04 10:43 ` Andy Shevchenko 2021-03-04 11:17 ` Álvaro Fernández Rojas 2021-03-04 11:17 ` Álvaro Fernández Rojas 2021-03-04 12:09 ` Andy Shevchenko 2021-03-04 12:09 ` Andy Shevchenko 2021-03-04 12:28 ` Álvaro Fernández Rojas 2021-03-04 12:28 ` Álvaro Fernández Rojas 2021-03-04 15:19 ` Andy Shevchenko 2021-03-04 15:19 ` Andy Shevchenko 2021-03-04 8:56 ` [PATCH v4 04/15] Documentation: add BCM6328 pincontroller binding documentation Álvaro Fernández Rojas 2021-03-04 8:56 ` Álvaro Fernández Rojas 2021-03-04 12:53 ` Michael Walle 2021-03-04 12:53 ` Michael Walle 2021-03-04 8:57 ` [PATCH v4 05/15] pinctrl: add a pincontrol driver for BCM6328 Álvaro Fernández Rojas 2021-03-04 8:57 ` Álvaro Fernández Rojas 2021-03-04 10:49 ` Andy Shevchenko 2021-03-04 10:49 ` Andy Shevchenko 2021-03-04 11:13 ` Álvaro Fernández Rojas 2021-03-04 11:13 ` Álvaro Fernández Rojas 2021-03-04 12:12 ` Andy Shevchenko 2021-03-04 12:12 ` Andy Shevchenko 2021-03-04 12:25 ` Álvaro Fernández Rojas 2021-03-04 12:25 ` Álvaro Fernández Rojas 2021-03-04 15:25 ` Andy Shevchenko 2021-03-04 15:25 ` Andy Shevchenko 2021-03-04 15:33 ` Álvaro Fernández Rojas 2021-03-04 15:33 ` Álvaro Fernández Rojas 2021-03-04 15:36 ` Andy Shevchenko 2021-03-04 15:36 ` Andy Shevchenko 2021-03-04 8:57 ` [PATCH v4 06/15] Documentation: add BCM6358 pincontroller binding documentation Álvaro Fernández Rojas 2021-03-04 8:57 ` Álvaro Fernández Rojas 2021-03-04 8:57 ` [PATCH v4 07/15] pinctrl: add a pincontrol driver for BCM6358 Álvaro Fernández Rojas 2021-03-04 8:57 ` Álvaro Fernández Rojas 2021-03-04 8:57 ` [PATCH v4 08/15] Documentation: add BCM6362 pincontroller binding documentation Álvaro Fernández Rojas 2021-03-04 8:57 ` Álvaro Fernández Rojas 2021-03-04 8:57 ` [PATCH v4 09/15] pinctrl: add a pincontrol driver for BCM6362 Álvaro Fernández Rojas 2021-03-04 8:57 ` Álvaro Fernández Rojas 2021-03-04 8:57 ` [PATCH v4 10/15] Documentation: add BCM6368 pincontroller binding documentation Álvaro Fernández Rojas 2021-03-04 8:57 ` Álvaro Fernández Rojas 2021-03-04 8:57 ` Álvaro Fernández Rojas [this message] 2021-03-04 8:57 ` [PATCH v4 11/15] pinctrl: add a pincontrol driver for BCM6368 Álvaro Fernández Rojas 2021-03-04 8:57 ` [PATCH v4 12/15] Documentation: add BCM63268 pincontroller binding documentation Álvaro Fernández Rojas 2021-03-04 8:57 ` Álvaro Fernández Rojas 2021-03-04 8:57 ` [PATCH v4 13/15] pinctrl: add a pincontrol driver for BCM63268 Álvaro Fernández Rojas 2021-03-04 8:57 ` Álvaro Fernández Rojas 2021-03-04 8:57 ` [PATCH v4 14/15] Documentation: add BCM6318 pincontroller binding documentation Álvaro Fernández Rojas 2021-03-04 8:57 ` Álvaro Fernández Rojas 2021-03-04 8:57 ` [PATCH v4 15/15] pinctrl: add a pincontrol driver for BCM6318 Álvaro Fernández Rojas 2021-03-04 8:57 ` Álvaro Fernández Rojas
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210304085710.7128-12-noltari@gmail.com \ --to=noltari@gmail.com \ --cc=andy.shevchenko@gmail.com \ --cc=bcm-kernel-feedback-list@broadcom.com \ --cc=bgolaszewski@baylibre.com \ --cc=devicetree@vger.kernel.org \ --cc=f.fainelli@gmail.com \ --cc=fazilyildiran@gmail.com \ --cc=jonas.gorski@gmail.com \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-gpio@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=michael@walle.cc \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.