All of lore.kernel.org
 help / color / mirror / Atom feed
From: Erwan Le Ray <erwan.leray@foss.st.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Jiri Slaby <jslaby@suse.com>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: <linux-serial@vger.kernel.org>,
	<linux-stm32@st-md-mailman.stormreply.com>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>,
	Erwan Le Ray <erwan.leray@foss.st.com>,
	Fabrice Gasnier <fabrice.gasnier@foss.st.com>,
	Valentin Caron <valentin.caron@foss.st.com>
Subject: [PATCH v2 07/13] serial: stm32: fix a deadlock in set_termios
Date: Thu, 4 Mar 2021 17:23:02 +0100	[thread overview]
Message-ID: <20210304162308.8984-8-erwan.leray@foss.st.com> (raw)
In-Reply-To: <20210304162308.8984-1-erwan.leray@foss.st.com>

CTS/RTS GPIOs support that has been added recently to STM32 UART driver has
introduced scheduled code in a set_termios part protected by a spin lock.
This generates a potential deadlock scenario:

Chain exists of:
&irq_desc_lock_class --> console_owner --> &port_lock_key

Possible unsafe locking scenario:

     CPU0                    CPU1
     ----                    ----
lock(&port_lock_key);
                           lock(console_owner);
                           lock(&port_lock_key);
lock(&irq_desc_lock_class);

*** DEADLOCK ***
4 locks held by stty/766:

Move the scheduled code after the spinlock.

Fixes: 6cf61b9bd7cc ("tty: serial: Add modem control gpio support for STM32 UART")
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>

diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 326f300dd410..a381ee52168a 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -829,12 +829,6 @@ static void stm32_usart_set_termios(struct uart_port *port,
 		cr3 |= USART_CR3_CTSE | USART_CR3_RTSE;
 	}
 
-	/* Handle modem control interrupts */
-	if (UART_ENABLE_MS(port, termios->c_cflag))
-		stm32_usart_enable_ms(port);
-	else
-		stm32_usart_disable_ms(port);
-
 	usartdiv = DIV_ROUND_CLOSEST(port->uartclk, baud);
 
 	/*
@@ -916,6 +910,12 @@ static void stm32_usart_set_termios(struct uart_port *port,
 
 	stm32_usart_set_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit));
 	spin_unlock_irqrestore(&port->lock, flags);
+
+	/* Handle modem control interrupts */
+	if (UART_ENABLE_MS(port, termios->c_cflag))
+		stm32_usart_enable_ms(port);
+	else
+		stm32_usart_disable_ms(port);
 }
 
 static const char *stm32_usart_type(struct uart_port *port)
-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: Erwan Le Ray <erwan.leray@foss.st.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Jiri Slaby <jslaby@suse.com>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: <linux-serial@vger.kernel.org>,
	<linux-stm32@st-md-mailman.stormreply.com>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>,
	Erwan Le Ray <erwan.leray@foss.st.com>,
	Fabrice Gasnier <fabrice.gasnier@foss.st.com>,
	Valentin Caron <valentin.caron@foss.st.com>
Subject: [PATCH v2 07/13] serial: stm32: fix a deadlock in set_termios
Date: Thu, 4 Mar 2021 17:23:02 +0100	[thread overview]
Message-ID: <20210304162308.8984-8-erwan.leray@foss.st.com> (raw)
In-Reply-To: <20210304162308.8984-1-erwan.leray@foss.st.com>

CTS/RTS GPIOs support that has been added recently to STM32 UART driver has
introduced scheduled code in a set_termios part protected by a spin lock.
This generates a potential deadlock scenario:

Chain exists of:
&irq_desc_lock_class --> console_owner --> &port_lock_key

Possible unsafe locking scenario:

     CPU0                    CPU1
     ----                    ----
lock(&port_lock_key);
                           lock(console_owner);
                           lock(&port_lock_key);
lock(&irq_desc_lock_class);

*** DEADLOCK ***
4 locks held by stty/766:

Move the scheduled code after the spinlock.

Fixes: 6cf61b9bd7cc ("tty: serial: Add modem control gpio support for STM32 UART")
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>

diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 326f300dd410..a381ee52168a 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -829,12 +829,6 @@ static void stm32_usart_set_termios(struct uart_port *port,
 		cr3 |= USART_CR3_CTSE | USART_CR3_RTSE;
 	}
 
-	/* Handle modem control interrupts */
-	if (UART_ENABLE_MS(port, termios->c_cflag))
-		stm32_usart_enable_ms(port);
-	else
-		stm32_usart_disable_ms(port);
-
 	usartdiv = DIV_ROUND_CLOSEST(port->uartclk, baud);
 
 	/*
@@ -916,6 +910,12 @@ static void stm32_usart_set_termios(struct uart_port *port,
 
 	stm32_usart_set_bits(port, ofs->cr1, BIT(cfg->uart_enable_bit));
 	spin_unlock_irqrestore(&port->lock, flags);
+
+	/* Handle modem control interrupts */
+	if (UART_ENABLE_MS(port, termios->c_cflag))
+		stm32_usart_enable_ms(port);
+	else
+		stm32_usart_disable_ms(port);
 }
 
 static const char *stm32_usart_type(struct uart_port *port)
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2021-03-04 16:25 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-04 16:22 [PATCH v2 00/13] stm32 usart various fixes Erwan Le Ray
2021-03-04 16:22 ` Erwan Le Ray
2021-03-04 16:22 ` [PATCH v2 01/13] serial: stm32: fix probe and remove order for dma Erwan Le Ray
2021-03-04 16:22   ` Erwan Le Ray
2021-03-04 16:22 ` [PATCH v2 02/13] serial: stm32: fix startup by enabling usart for reception Erwan Le Ray
2021-03-04 16:22   ` Erwan Le Ray
2021-03-04 16:22 ` [PATCH v2 03/13] serial: stm32: fix incorrect characters on console Erwan Le Ray
2021-03-04 16:22   ` Erwan Le Ray
2021-03-04 16:22 ` [PATCH v2 04/13] serial: stm32: fix TX and RX FIFO thresholds Erwan Le Ray
2021-03-04 16:22   ` Erwan Le Ray
2021-03-04 16:23 ` [PATCH v2 05/13] serial: stm32: fix a deadlock condition with wakeup event Erwan Le Ray
2021-03-04 16:23   ` Erwan Le Ray
2021-03-04 16:23 ` [PATCH v2 06/13] serial: stm32: fix wake-up flag handling Erwan Le Ray
2021-03-04 16:23   ` Erwan Le Ray
2021-03-04 16:23 ` Erwan Le Ray [this message]
2021-03-04 16:23   ` [PATCH v2 07/13] serial: stm32: fix a deadlock in set_termios Erwan Le Ray
2021-03-04 16:23 ` [PATCH v2 08/13] serial: stm32: fix tx dma completion, release channel Erwan Le Ray
2021-03-04 16:23   ` Erwan Le Ray
2021-03-04 16:23 ` [PATCH v2 09/13] serial: stm32: call stm32_transmit_chars locked Erwan Le Ray
2021-03-04 16:23   ` Erwan Le Ray
2021-03-04 16:23 ` [PATCH v2 10/13] serial: stm32: fix FIFO flush in startup and set_termios Erwan Le Ray
2021-03-04 16:23   ` Erwan Le Ray
2021-03-04 16:23 ` [PATCH v2 11/13] serial: stm32: add FIFO flush when port is closed Erwan Le Ray
2021-03-04 16:23   ` Erwan Le Ray
2021-03-04 16:23 ` [PATCH v2 12/13] serial: stm32: fix tx_empty condition Erwan Le Ray
2021-03-04 16:23   ` Erwan Le Ray
2021-03-04 16:23 ` [PATCH v2 13/13] serial: stm32: add support for "flush_buffer" ops Erwan Le Ray
2021-03-04 16:23   ` Erwan Le Ray

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210304162308.8984-8-erwan.leray@foss.st.com \
    --to=erwan.leray@foss.st.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=fabrice.gasnier@foss.st.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=jslaby@suse.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=valentin.caron@foss.st.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.