[PATCH] drm/komeda: Fix off-by-1 when with readback conn due to rounding

[carsten.haitzler@foss.arm.com]

From: Carsten Haitzler <carsten.haitzler@arm.com>

When setting up a readback conenctor that writes data back to memory
rather than to an actual output device (HDMI etc.), rounding was ses
to round-down. As the DPU uses a higher internal number of bits when
generating a color value, this round-down back to 8bit ended up with
everything being off-by one. e.g. #ffffff became #fefefe. This sets
rounding to "round" so things end up correct by turning on the round
flag (LW_TRC).

Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
---
 drivers/gpu/drm/arm/display/komeda/d71/d71_component.c | 6 +++++-
 drivers/gpu/drm/arm/display/komeda/d71/d71_regs.h      | 1 +
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c b/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c
index 8a02ade369db..d551e79fa0f1 100644
--- a/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c
+++ b/drivers/gpu/drm/arm/display/komeda/d71/d71_component.c
@@ -468,7 +468,11 @@ static void d71_wb_layer_update(struct komeda_component *c,
 	struct komeda_layer_state *st = to_layer_st(state);
 	struct drm_connector_state *conn_st = state->wb_conn->state;
 	struct komeda_fb *kfb = to_kfb(conn_st->writeback_job->fb);
-	u32 ctrl = L_EN | LW_OFM, mask = L_EN | LW_OFM | LW_TBU_EN;
+	/* LW_TRC sets rounding to round not truncate which is needed for
+         * the output of writeback to match the input in the most common
+         * use cases like RGB888 -> RGB888, so set this bit by default */
+	u32 ctrl = L_EN | LW_OFM | LW_TRC;
+	u32 mask = L_EN | LW_OFM | LW_TBU_EN | LW_TRC;
 	u32 __iomem *reg = c->reg;
 
 	d71_layer_update_fb(c, kfb, st->addr);
diff --git a/drivers/gpu/drm/arm/display/komeda/d71/d71_regs.h b/drivers/gpu/drm/arm/display/komeda/d71/d71_regs.h
index e80172a0b320..a8036689d721 100644
--- a/drivers/gpu/drm/arm/display/komeda/d71/d71_regs.h
+++ b/drivers/gpu/drm/arm/display/komeda/d71/d71_regs.h
@@ -321,6 +321,7 @@
 #define LAYER_WR_FORMAT		0x0D8
 
 /* Layer_WR control bits */
+#define LW_TRC			BIT(1)
 #define LW_OFM			BIT(4)
 #define LW_LALPHA(x)		(((x) & 0xFF) << 8)
 #define LW_A_WCACHE(x)		(((x) & 0xF) << 28)
-- 
2.30.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel