All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lucas Tanure <tanureal@opensource.cirrus.com>
To: James Schulman <james.schulman@cirrus.com>,
	David Rhodes <david.rhodes@cirrus.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
	Takashi Iwai <tiwai@suse.com>
Cc: <alsa-devel@alsa-project.org>, <linux-kernel@vger.kernel.org>,
	<patches@opensource.cirrus.com>,
	Richard Fitzgerald <rf@opensource.cirrus.com>,
	Lucas Tanure <tanureal@opensource.cirrus.com>
Subject: [PATCH v3 13/15] ASoC: cs42l42: Wait at least 150us after writing SCLK_PRESENT
Date: Sat, 6 Mar 2021 18:55:51 +0000	[thread overview]
Message-ID: <20210306185553.62053-14-tanureal@opensource.cirrus.com> (raw)
In-Reply-To: <20210306185553.62053-1-tanureal@opensource.cirrus.com>

From: Richard Fitzgerald <rf@opensource.cirrus.com>

There must be a delay of at least 150us after writing SCLK_PRESENT
before issuing another I2C write.

This is done using struct reg_sequence because it can specify a delay
after the write and the whole sequence is written atomically.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
---
Changes in v3:
- No changes

Changes in v2:
- struct cs42l42_private add by this patch was wrong and moved to the
correct patch
- Lucas signed-off added

 sound/soc/codecs/cs42l42.c | 27 ++++++++++++++++++++++-----
 sound/soc/codecs/cs42l42.h |  1 +
 2 files changed, 23 insertions(+), 5 deletions(-)

diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index 68b7ed71ad542..08718fd10fb9b 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -549,6 +549,24 @@ static const struct snd_soc_component_driver soc_component_dev_cs42l42 = {
 	.non_legacy_dai_naming	= 1,
 };
 
+/* Switch to SCLK. Atomic delay after the write to allow the switch to complete. */
+static const struct reg_sequence cs42l42_to_sclk_seq[] = {
+	{
+		.reg = CS42L42_OSC_SWITCH,
+		.def = CS42L42_SCLK_PRESENT_MASK,
+		.delay_us = CS42L42_CLOCK_SWITCH_DELAY_US,
+	},
+};
+
+/* Switch to OSC. Atomic delay after the write to allow the switch to complete. */
+static const struct reg_sequence cs42l42_to_osc_seq[] = {
+	{
+		.reg = CS42L42_OSC_SWITCH,
+		.def = 0,
+		.delay_us = CS42L42_CLOCK_SWITCH_DELAY_US,
+	},
+};
+
 struct cs42l42_pll_params {
 	u32 sclk;
 	u8 mclk_div;
@@ -861,8 +879,8 @@ static int cs42l42_mute_stream(struct snd_soc_dai *dai, int mute, int stream)
 			 * SCLK must remain running until after this clock switch.
 			 * Without a source of clock the I2C bus doesn't work.
 			 */
-			snd_soc_component_update_bits(component, CS42L42_OSC_SWITCH,
-						      CS42L42_SCLK_PRESENT_MASK, 0);
+			regmap_multi_reg_write(cs42l42->regmap, cs42l42_to_osc_seq,
+					       ARRAY_SIZE(cs42l42_to_osc_seq));
 			snd_soc_component_update_bits(component, CS42L42_PLL_CTL1,
 						      CS42L42_PLL_START_MASK, 0);
 		}
@@ -873,9 +891,8 @@ static int cs42l42_mute_stream(struct snd_soc_dai *dai, int mute, int stream)
 						      CS42L42_PLL_START_MASK, 1);
 
 			/* Mark SCLK as present, turn off internal oscillator */
-			snd_soc_component_update_bits(component, CS42L42_OSC_SWITCH,
-						      CS42L42_SCLK_PRESENT_MASK,
-						      CS42L42_SCLK_PRESENT_MASK);
+			regmap_multi_reg_write(cs42l42->regmap, cs42l42_to_sclk_seq,
+					       ARRAY_SIZE(cs42l42_to_sclk_seq));
 		}
 		cs42l42->stream_use |= 1 << stream;
 
diff --git a/sound/soc/codecs/cs42l42.h b/sound/soc/codecs/cs42l42.h
index 429c6833fc811..214cee762709d 100644
--- a/sound/soc/codecs/cs42l42.h
+++ b/sound/soc/codecs/cs42l42.h
@@ -755,6 +755,7 @@
 
 #define CS42L42_NUM_SUPPLIES	5
 #define CS42L42_BOOT_TIME_US	3000
+#define CS42L42_CLOCK_SWITCH_DELAY_US 150
 
 static const char *const cs42l42_supply_names[CS42L42_NUM_SUPPLIES] = {
 	"VA",
-- 
2.30.1


WARNING: multiple messages have this Message-ID (diff)
From: Lucas Tanure <tanureal@opensource.cirrus.com>
To: James Schulman <james.schulman@cirrus.com>,
	David Rhodes <david.rhodes@cirrus.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
	Takashi Iwai <tiwai@suse.com>
Cc: patches@opensource.cirrus.com, alsa-devel@alsa-project.org,
	Richard Fitzgerald <rf@opensource.cirrus.com>,
	linux-kernel@vger.kernel.org,
	Lucas Tanure <tanureal@opensource.cirrus.com>
Subject: [PATCH v3 13/15] ASoC: cs42l42: Wait at least 150us after writing SCLK_PRESENT
Date: Sat, 6 Mar 2021 18:55:51 +0000	[thread overview]
Message-ID: <20210306185553.62053-14-tanureal@opensource.cirrus.com> (raw)
In-Reply-To: <20210306185553.62053-1-tanureal@opensource.cirrus.com>

From: Richard Fitzgerald <rf@opensource.cirrus.com>

There must be a delay of at least 150us after writing SCLK_PRESENT
before issuing another I2C write.

This is done using struct reg_sequence because it can specify a delay
after the write and the whole sequence is written atomically.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
---
Changes in v3:
- No changes

Changes in v2:
- struct cs42l42_private add by this patch was wrong and moved to the
correct patch
- Lucas signed-off added

 sound/soc/codecs/cs42l42.c | 27 ++++++++++++++++++++++-----
 sound/soc/codecs/cs42l42.h |  1 +
 2 files changed, 23 insertions(+), 5 deletions(-)

diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index 68b7ed71ad542..08718fd10fb9b 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -549,6 +549,24 @@ static const struct snd_soc_component_driver soc_component_dev_cs42l42 = {
 	.non_legacy_dai_naming	= 1,
 };
 
+/* Switch to SCLK. Atomic delay after the write to allow the switch to complete. */
+static const struct reg_sequence cs42l42_to_sclk_seq[] = {
+	{
+		.reg = CS42L42_OSC_SWITCH,
+		.def = CS42L42_SCLK_PRESENT_MASK,
+		.delay_us = CS42L42_CLOCK_SWITCH_DELAY_US,
+	},
+};
+
+/* Switch to OSC. Atomic delay after the write to allow the switch to complete. */
+static const struct reg_sequence cs42l42_to_osc_seq[] = {
+	{
+		.reg = CS42L42_OSC_SWITCH,
+		.def = 0,
+		.delay_us = CS42L42_CLOCK_SWITCH_DELAY_US,
+	},
+};
+
 struct cs42l42_pll_params {
 	u32 sclk;
 	u8 mclk_div;
@@ -861,8 +879,8 @@ static int cs42l42_mute_stream(struct snd_soc_dai *dai, int mute, int stream)
 			 * SCLK must remain running until after this clock switch.
 			 * Without a source of clock the I2C bus doesn't work.
 			 */
-			snd_soc_component_update_bits(component, CS42L42_OSC_SWITCH,
-						      CS42L42_SCLK_PRESENT_MASK, 0);
+			regmap_multi_reg_write(cs42l42->regmap, cs42l42_to_osc_seq,
+					       ARRAY_SIZE(cs42l42_to_osc_seq));
 			snd_soc_component_update_bits(component, CS42L42_PLL_CTL1,
 						      CS42L42_PLL_START_MASK, 0);
 		}
@@ -873,9 +891,8 @@ static int cs42l42_mute_stream(struct snd_soc_dai *dai, int mute, int stream)
 						      CS42L42_PLL_START_MASK, 1);
 
 			/* Mark SCLK as present, turn off internal oscillator */
-			snd_soc_component_update_bits(component, CS42L42_OSC_SWITCH,
-						      CS42L42_SCLK_PRESENT_MASK,
-						      CS42L42_SCLK_PRESENT_MASK);
+			regmap_multi_reg_write(cs42l42->regmap, cs42l42_to_sclk_seq,
+					       ARRAY_SIZE(cs42l42_to_sclk_seq));
 		}
 		cs42l42->stream_use |= 1 << stream;
 
diff --git a/sound/soc/codecs/cs42l42.h b/sound/soc/codecs/cs42l42.h
index 429c6833fc811..214cee762709d 100644
--- a/sound/soc/codecs/cs42l42.h
+++ b/sound/soc/codecs/cs42l42.h
@@ -755,6 +755,7 @@
 
 #define CS42L42_NUM_SUPPLIES	5
 #define CS42L42_BOOT_TIME_US	3000
+#define CS42L42_CLOCK_SWITCH_DELAY_US 150
 
 static const char *const cs42l42_supply_names[CS42L42_NUM_SUPPLIES] = {
 	"VA",
-- 
2.30.1


  parent reply	other threads:[~2021-03-06 19:14 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-06 18:55 [PATCH v3 00/15] Report jack and button detection + Capture Support Lucas Tanure
2021-03-06 18:55 ` Lucas Tanure
2021-03-06 18:55 ` [PATCH v3 01/15] ASoC: cs42l42: Fix Bitclock polarity inversion Lucas Tanure
2021-03-06 18:55   ` Lucas Tanure
2021-03-06 18:55 ` [PATCH v3 02/15] ASoC: cs42l42: Fix channel width support Lucas Tanure
2021-03-06 18:55   ` Lucas Tanure
2021-03-06 18:55 ` [PATCH v3 03/15] ASoC: cs42l42: Fix mixer volume control Lucas Tanure
2021-03-06 18:55   ` Lucas Tanure
2021-03-06 18:55 ` [PATCH v3 04/15] ASoC: cs42l42: Don't enable/disable regulator at Bias Level Lucas Tanure
2021-03-06 18:55   ` Lucas Tanure
2021-03-06 18:55 ` [PATCH v3 05/15] ASoC: cs42l42: Always wait at least 3ms after reset Lucas Tanure
2021-03-06 18:55   ` Lucas Tanure
2021-03-06 18:55 ` [PATCH v3 06/15] ASoC: cs42l42: Remove power if the driver is being removed Lucas Tanure
2021-03-06 18:55   ` Lucas Tanure
2021-03-06 18:55 ` [PATCH v3 07/15] ASoC: cs42l42: Disable regulators if probe fails Lucas Tanure
2021-03-06 18:55   ` Lucas Tanure
2021-03-06 18:55 ` [PATCH v3 08/15] ASoC: cs42l42: Provide finer control on playback path Lucas Tanure
2021-03-06 18:55   ` Lucas Tanure
2021-03-06 18:55 ` [PATCH v3 09/15] ASoC: cs42l42: Set clock source for both ways of stream Lucas Tanure
2021-03-06 18:55   ` Lucas Tanure
2021-03-06 18:55 ` [PATCH v3 10/15] ASoC: cs42l42: Add Capture Support Lucas Tanure
2021-03-06 18:55   ` Lucas Tanure
2021-03-06 18:55 ` [PATCH v3 11/15] ASoC: cs42l42: Report jack and button detection Lucas Tanure
2021-03-06 18:55   ` Lucas Tanure
2021-03-06 18:55 ` [PATCH v3 12/15] ASoC: cs42l42: Use bclk from hw_params if set_sysclk was not called Lucas Tanure
2021-03-06 18:55   ` Lucas Tanure
2021-03-06 18:55 ` Lucas Tanure [this message]
2021-03-06 18:55   ` [PATCH v3 13/15] ASoC: cs42l42: Wait at least 150us after writing SCLK_PRESENT Lucas Tanure
2021-03-06 18:55 ` [PATCH v3 14/15] ASoC: cs42l42: Only start PLL if it is needed Lucas Tanure
2021-03-06 18:55   ` Lucas Tanure
2021-03-06 18:55 ` [PATCH v3 15/15] ASoC: cs42l42: Wait for PLL to lock before switching to it Lucas Tanure
2021-03-06 18:55   ` Lucas Tanure
2021-03-09 19:06 ` (subset) [PATCH v3 00/15] Report jack and button detection + Capture Support Mark Brown
2021-03-09 19:06   ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210306185553.62053-14-tanureal@opensource.cirrus.com \
    --to=tanureal@opensource.cirrus.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=david.rhodes@cirrus.com \
    --cc=james.schulman@cirrus.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=patches@opensource.cirrus.com \
    --cc=perex@perex.cz \
    --cc=rf@opensource.cirrus.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.