From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> To: Michael Turquette <mturquette@baylibre.com>, Stephen Boyd <sboyd@kernel.org>, Dinh Nguyen <dinguyen@kernel.org>, linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org, Arnd Bergmann <arnd@arndb.de> Cc: linux-arm-kernel@lists.infradead.org, Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Subject: [PATCH 1/3] clk: socfpga: allow building N5X clocks with ARCH_N5X Date: Mon, 8 Mar 2021 19:23:37 +0100 [thread overview] Message-ID: <20210308182339.379775-2-krzysztof.kozlowski@canonical.com> (raw) In-Reply-To: <20210308182339.379775-1-krzysztof.kozlowski@canonical.com> The Intel's eASIC N5X (ARCH_N5X) architecture shares a lot with Agilex (ARCH_AGILEX) so it uses the same socfpga_agilex.dtsi, with minor changes. Also the clock drivers are the same. However the clock drivers won't be build without ARCH_AGILEX. One could assume that ARCH_N5X simply depends on ARCH_AGILEX but this was not modeled in Kconfig. In current stage the ARCH_N5X is simply unbootable. Add a separate Kconfig entry for clocks used by both ARCH_N5X and ARCH_AGILEX so the necessary objects will be built if either of them is selected. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> --- drivers/clk/Kconfig | 1 + drivers/clk/Makefile | 1 + drivers/clk/socfpga/Kconfig | 6 ++++++ drivers/clk/socfpga/Makefile | 4 ++-- 4 files changed, 10 insertions(+), 2 deletions(-) create mode 100644 drivers/clk/socfpga/Kconfig diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index a588d56502d4..1d1891b9cad2 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -394,6 +394,7 @@ source "drivers/clk/renesas/Kconfig" source "drivers/clk/rockchip/Kconfig" source "drivers/clk/samsung/Kconfig" source "drivers/clk/sifive/Kconfig" +source "drivers/clk/socfpga/Kconfig" source "drivers/clk/sprd/Kconfig" source "drivers/clk/sunxi/Kconfig" source "drivers/clk/sunxi-ng/Kconfig" diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index b22ae4f81e0b..12e46b12e587 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -106,6 +106,7 @@ obj-$(CONFIG_COMMON_CLK_SAMSUNG) += samsung/ obj-$(CONFIG_CLK_SIFIVE) += sifive/ obj-$(CONFIG_ARCH_SOCFPGA) += socfpga/ obj-$(CONFIG_ARCH_AGILEX) += socfpga/ +obj-$(CONFIG_ARCH_N5X) += socfpga/ obj-$(CONFIG_ARCH_STRATIX10) += socfpga/ obj-$(CONFIG_PLAT_SPEAR) += spear/ obj-y += sprd/ diff --git a/drivers/clk/socfpga/Kconfig b/drivers/clk/socfpga/Kconfig new file mode 100644 index 000000000000..cae6fd9fac64 --- /dev/null +++ b/drivers/clk/socfpga/Kconfig @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0 +config COMMON_CLK_AGILEX + bool + # Intel Agilex / N5X clock controller support + default y if ARCH_AGILEX || ARCH_N5X + depends on ARCH_AGILEX || ARCH_N5X diff --git a/drivers/clk/socfpga/Makefile b/drivers/clk/socfpga/Makefile index bf736f8d201a..e3614f758184 100644 --- a/drivers/clk/socfpga/Makefile +++ b/drivers/clk/socfpga/Makefile @@ -3,5 +3,5 @@ obj-$(CONFIG_ARCH_SOCFPGA) += clk.o clk-gate.o clk-pll.o clk-periph.o obj-$(CONFIG_ARCH_SOCFPGA) += clk-pll-a10.o clk-periph-a10.o clk-gate-a10.o obj-$(CONFIG_ARCH_STRATIX10) += clk-s10.o obj-$(CONFIG_ARCH_STRATIX10) += clk-pll-s10.o clk-periph-s10.o clk-gate-s10.o -obj-$(CONFIG_ARCH_AGILEX) += clk-agilex.o -obj-$(CONFIG_ARCH_AGILEX) += clk-pll-s10.o clk-periph-s10.o clk-gate-s10.o +obj-$(CONFIG_COMMON_CLK_AGILEX) += clk-agilex.o +obj-$(CONFIG_COMMON_CLK_AGILEX) += clk-pll-s10.o clk-periph-s10.o clk-gate-s10.o -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> To: Michael Turquette <mturquette@baylibre.com>, Stephen Boyd <sboyd@kernel.org>, Dinh Nguyen <dinguyen@kernel.org>, linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org, Arnd Bergmann <arnd@arndb.de> Cc: linux-arm-kernel@lists.infradead.org, Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Subject: [PATCH 1/3] clk: socfpga: allow building N5X clocks with ARCH_N5X Date: Mon, 8 Mar 2021 19:23:37 +0100 [thread overview] Message-ID: <20210308182339.379775-2-krzysztof.kozlowski@canonical.com> (raw) In-Reply-To: <20210308182339.379775-1-krzysztof.kozlowski@canonical.com> The Intel's eASIC N5X (ARCH_N5X) architecture shares a lot with Agilex (ARCH_AGILEX) so it uses the same socfpga_agilex.dtsi, with minor changes. Also the clock drivers are the same. However the clock drivers won't be build without ARCH_AGILEX. One could assume that ARCH_N5X simply depends on ARCH_AGILEX but this was not modeled in Kconfig. In current stage the ARCH_N5X is simply unbootable. Add a separate Kconfig entry for clocks used by both ARCH_N5X and ARCH_AGILEX so the necessary objects will be built if either of them is selected. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> --- drivers/clk/Kconfig | 1 + drivers/clk/Makefile | 1 + drivers/clk/socfpga/Kconfig | 6 ++++++ drivers/clk/socfpga/Makefile | 4 ++-- 4 files changed, 10 insertions(+), 2 deletions(-) create mode 100644 drivers/clk/socfpga/Kconfig diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index a588d56502d4..1d1891b9cad2 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -394,6 +394,7 @@ source "drivers/clk/renesas/Kconfig" source "drivers/clk/rockchip/Kconfig" source "drivers/clk/samsung/Kconfig" source "drivers/clk/sifive/Kconfig" +source "drivers/clk/socfpga/Kconfig" source "drivers/clk/sprd/Kconfig" source "drivers/clk/sunxi/Kconfig" source "drivers/clk/sunxi-ng/Kconfig" diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index b22ae4f81e0b..12e46b12e587 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -106,6 +106,7 @@ obj-$(CONFIG_COMMON_CLK_SAMSUNG) += samsung/ obj-$(CONFIG_CLK_SIFIVE) += sifive/ obj-$(CONFIG_ARCH_SOCFPGA) += socfpga/ obj-$(CONFIG_ARCH_AGILEX) += socfpga/ +obj-$(CONFIG_ARCH_N5X) += socfpga/ obj-$(CONFIG_ARCH_STRATIX10) += socfpga/ obj-$(CONFIG_PLAT_SPEAR) += spear/ obj-y += sprd/ diff --git a/drivers/clk/socfpga/Kconfig b/drivers/clk/socfpga/Kconfig new file mode 100644 index 000000000000..cae6fd9fac64 --- /dev/null +++ b/drivers/clk/socfpga/Kconfig @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0 +config COMMON_CLK_AGILEX + bool + # Intel Agilex / N5X clock controller support + default y if ARCH_AGILEX || ARCH_N5X + depends on ARCH_AGILEX || ARCH_N5X diff --git a/drivers/clk/socfpga/Makefile b/drivers/clk/socfpga/Makefile index bf736f8d201a..e3614f758184 100644 --- a/drivers/clk/socfpga/Makefile +++ b/drivers/clk/socfpga/Makefile @@ -3,5 +3,5 @@ obj-$(CONFIG_ARCH_SOCFPGA) += clk.o clk-gate.o clk-pll.o clk-periph.o obj-$(CONFIG_ARCH_SOCFPGA) += clk-pll-a10.o clk-periph-a10.o clk-gate-a10.o obj-$(CONFIG_ARCH_STRATIX10) += clk-s10.o obj-$(CONFIG_ARCH_STRATIX10) += clk-pll-s10.o clk-periph-s10.o clk-gate-s10.o -obj-$(CONFIG_ARCH_AGILEX) += clk-agilex.o -obj-$(CONFIG_ARCH_AGILEX) += clk-pll-s10.o clk-periph-s10.o clk-gate-s10.o +obj-$(CONFIG_COMMON_CLK_AGILEX) += clk-agilex.o +obj-$(CONFIG_COMMON_CLK_AGILEX) += clk-pll-s10.o clk-periph-s10.o clk-gate-s10.o -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-03-08 18:24 UTC|newest] Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-03-08 18:23 [RFT 0/3] clk: socfpga: minor cleanups and compile testing Krzysztof Kozlowski 2021-03-08 18:23 ` Krzysztof Kozlowski 2021-03-08 18:23 ` Krzysztof Kozlowski [this message] 2021-03-08 18:23 ` [PATCH 1/3] clk: socfpga: allow building N5X clocks with ARCH_N5X Krzysztof Kozlowski 2021-03-08 18:23 ` [PATCH 2/3] clk: socfpga: drop duplicated lines in Makefile Krzysztof Kozlowski 2021-03-08 18:23 ` Krzysztof Kozlowski 2021-03-08 18:23 ` [PATCH 3/3] clk: socfpga: allow compile testing of Stratix 10 / Agilex clocks Krzysztof Kozlowski 2021-03-08 18:23 ` Krzysztof Kozlowski 2021-03-09 0:00 ` kernel test robot 2021-03-09 8:49 ` Krzysztof Kozlowski 2021-03-09 8:49 ` Krzysztof Kozlowski 2021-03-09 9:02 ` Krzysztof Kozlowski 2021-03-09 9:02 ` Krzysztof Kozlowski 2021-03-09 10:11 ` Arnd Bergmann 2021-03-09 10:11 ` Arnd Bergmann
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210308182339.379775-2-krzysztof.kozlowski@canonical.com \ --to=krzysztof.kozlowski@canonical.com \ --cc=arnd@arndb.de \ --cc=dinguyen@kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-clk@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mturquette@baylibre.com \ --cc=sboyd@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.