All of lore.kernel.org
 help / color / mirror / Atom feed
From: Thomas Gleixner <tglx@linutronix.de>
To: LKML <linux-kernel@vger.kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>,
	Paul McKenney <paulmck@kernel.org>,
	Sebastian Andrzej Siewior <bigeasy@linutronix.de>,
	Frederic Weisbecker <frederic@kernel.org>
Subject: [patch V3 4/6] softirq: Make softirq control and processing RT aware
Date: Tue, 09 Mar 2021 09:55:56 +0100	[thread overview]
Message-ID: <20210309085727.426370483@linutronix.de> (raw)
In-Reply-To: 20210309085552.815026890@linutronix.de

Provide a local lock based serialization for soft interrupts on RT which
allows the local_bh_disabled() sections and servicing soft interrupts to be
preemptible.

Provide the necessary inline helpers which allow to reuse the bulk of the
softirq processing code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
---
 include/linux/bottom_half.h |    2 
 kernel/softirq.c            |  188 ++++++++++++++++++++++++++++++++++++++++++--
 2 files changed, 182 insertions(+), 8 deletions(-)

--- a/include/linux/bottom_half.h
+++ b/include/linux/bottom_half.h
@@ -4,7 +4,7 @@
 
 #include <linux/preempt.h>
 
-#ifdef CONFIG_TRACE_IRQFLAGS
+#if defined(CONFIG_PREEMPT_RT) || defined(CONFIG_TRACE_IRQFLAGS)
 extern void __local_bh_disable_ip(unsigned long ip, unsigned int cnt);
 #else
 static __always_inline void __local_bh_disable_ip(unsigned long ip, unsigned int cnt)
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -13,6 +13,7 @@
 #include <linux/kernel_stat.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
+#include <linux/local_lock.h>
 #include <linux/mm.h>
 #include <linux/notifier.h>
 #include <linux/percpu.h>
@@ -103,20 +104,189 @@ EXPORT_PER_CPU_SYMBOL_GPL(hardirq_contex
 #endif
 
 /*
- * preempt_count and SOFTIRQ_OFFSET usage:
- * - preempt_count is changed by SOFTIRQ_OFFSET on entering or leaving
- *   softirq processing.
- * - preempt_count is changed by SOFTIRQ_DISABLE_OFFSET (= 2 * SOFTIRQ_OFFSET)
+ * SOFTIRQ_OFFSET usage:
+ *
+ * On !RT kernels 'count' is the preempt counter, on RT kernels this applies
+ * to a per CPU counter and to task::softirqs_disabled_cnt.
+ *
+ * - count is changed by SOFTIRQ_OFFSET on entering or leaving softirq
+ *   processing.
+ *
+ * - count is changed by SOFTIRQ_DISABLE_OFFSET (= 2 * SOFTIRQ_OFFSET)
  *   on local_bh_disable or local_bh_enable.
+ *
  * This lets us distinguish between whether we are currently processing
  * softirq and whether we just have bh disabled.
  */
+#ifdef CONFIG_PREEMPT_RT
+
+/*
+ * RT accounts for BH disabled sections in task::softirqs_disabled_cnt and
+ * also in per CPU softirq_ctrl::cnt. This is necessary to allow tasks in a
+ * softirq disabled section to be preempted.
+ *
+ * The per task counter is used for softirq_count(), in_softirq() and
+ * in_serving_softirqs() because these counts are only valid when the task
+ * holding softirq_ctrl::lock is running.
+ *
+ * The per CPU counter prevents pointless wakeups of ksoftirqd in case that
+ * the task which is in a softirq disabled section is preempted or blocks.
+ */
+struct softirq_ctrl {
+	local_lock_t	lock;
+	int		cnt;
+};
+
+static DEFINE_PER_CPU(struct softirq_ctrl, softirq_ctrl) = {
+	.lock	= INIT_LOCAL_LOCK(softirq_ctrl.lock),
+};
+
+void __local_bh_disable_ip(unsigned long ip, unsigned int cnt)
+{
+	unsigned long flags;
+	int newcnt;
+
+	WARN_ON_ONCE(in_hardirq());
+
+	/* First entry of a task into a BH disabled section? */
+	if (!current->softirq_disable_cnt) {
+		if (preemptible()) {
+			local_lock(&softirq_ctrl.lock);
+			/* Required to meet the RCU bottomhalf requirements. */
+			rcu_read_lock();
+		} else {
+			DEBUG_LOCKS_WARN_ON(this_cpu_read(softirq_ctrl.cnt));
+		}
+	}
+
+	/*
+	 * Track the per CPU softirq disabled state. On RT this is per CPU
+	 * state to allow preemption of bottom half disabled sections.
+	 */
+	newcnt = __this_cpu_add_return(softirq_ctrl.cnt, cnt);
+	/*
+	 * Reflect the result in the task state to prevent recursion on the
+	 * local lock and to make softirq_count() & al work.
+	 */
+	current->softirq_disable_cnt = newcnt;
+
+	if (IS_ENABLED(CONFIG_TRACE_IRQFLAGS) && newcnt == cnt) {
+		raw_local_irq_save(flags);
+		lockdep_softirqs_off(ip);
+		raw_local_irq_restore(flags);
+	}
+}
+EXPORT_SYMBOL(__local_bh_disable_ip);
+
+static void __local_bh_enable(unsigned int cnt, bool unlock)
+{
+	unsigned long flags;
+	int newcnt;
+
+	DEBUG_LOCKS_WARN_ON(current->softirq_disable_cnt !=
+			    this_cpu_read(softirq_ctrl.cnt));
+
+	if (IS_ENABLED(CONFIG_TRACE_IRQFLAGS) && softirq_count() == cnt) {
+		raw_local_irq_save(flags);
+		lockdep_softirqs_on(_RET_IP_);
+		raw_local_irq_restore(flags);
+	}
+
+	newcnt = __this_cpu_sub_return(softirq_ctrl.cnt, cnt);
+	current->softirq_disable_cnt = newcnt;
+
+	if (!newcnt && unlock) {
+		rcu_read_unlock();
+		local_unlock(&softirq_ctrl.lock);
+	}
+}
+
+void __local_bh_enable_ip(unsigned long ip, unsigned int cnt)
+{
+	bool preempt_on = preemptible();
+	unsigned long flags;
+	u32 pending;
+	int curcnt;
+
+	WARN_ON_ONCE(in_irq());
+	lockdep_assert_irqs_enabled();
+
+	local_irq_save(flags);
+	curcnt = __this_cpu_read(softirq_ctrl.cnt);
+
+	/*
+	 * If this is not reenabling soft interrupts, no point in trying to
+	 * run pending ones.
+	 */
+	if (curcnt != cnt)
+		goto out;
+
+	pending = local_softirq_pending();
+	if (!pending || ksoftirqd_running(pending))
+		goto out;
+
+	/*
+	 * If this was called from non preemptible context, wake up the
+	 * softirq daemon.
+	 */
+	if (!preempt_on) {
+		wakeup_softirqd();
+		goto out;
+	}
+
+	/*
+	 * Adjust softirq count to SOFTIRQ_OFFSET which makes
+	 * in_serving_softirq() become true.
+	 */
+	cnt = SOFTIRQ_OFFSET;
+	__local_bh_enable(cnt, false);
+	__do_softirq();
+
+out:
+	__local_bh_enable(cnt, preempt_on);
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(__local_bh_enable_ip);
+
+/*
+ * Invoked from ksoftirqd_run() outside of the interrupt disabled section
+ * to acquire the per CPU local lock for reentrancy protection.
+ */
+static inline void ksoftirqd_run_begin(void)
+{
+	__local_bh_disable_ip(_RET_IP_, SOFTIRQ_OFFSET);
+	local_irq_disable();
+}
+
+/* Counterpart to ksoftirqd_run_begin() */
+static inline void ksoftirqd_run_end(void)
+{
+	__local_bh_enable(SOFTIRQ_OFFSET, true);
+	WARN_ON_ONCE(in_interrupt());
+	local_irq_enable();
+}
+
+static inline void softirq_handle_begin(void) { }
+static inline void softirq_handle_end(void) { }
+
+static inline bool should_wake_ksoftirqd(void)
+{
+	return !this_cpu_read(softirq_ctrl.cnt);
+}
+
+static inline void invoke_softirq(void)
+{
+	if (should_wake_ksoftirqd())
+		wakeup_softirqd();
+}
+
+#else /* CONFIG_PREEMPT_RT */
 
-#ifdef CONFIG_TRACE_IRQFLAGS
 /*
- * This is for softirq.c-internal use, where hardirqs are disabled
+ * This one is for softirq.c-internal use, where hardirqs are disabled
  * legitimately:
  */
+#ifdef CONFIG_TRACE_IRQFLAGS
 void __local_bh_disable_ip(unsigned long ip, unsigned int cnt)
 {
 	unsigned long flags;
@@ -277,6 +447,8 @@ asmlinkage __visible void do_softirq(voi
 	local_irq_restore(flags);
 }
 
+#endif /* !CONFIG_PREEMPT_RT */
+
 /*
  * We restart softirq processing for at most MAX_SOFTIRQ_RESTART times,
  * but break the loop if need_resched() is set or after 2 ms.
@@ -381,8 +553,10 @@ asmlinkage __visible void __softirq_entr
 		pending >>= softirq_bit;
 	}
 
-	if (__this_cpu_read(ksoftirqd) == current)
+	if (!IS_ENABLED(CONFIG_PREEMPT_RT) &&
+	    __this_cpu_read(ksoftirqd) == current)
 		rcu_softirq_qs();
+
 	local_irq_disable();
 
 	pending = local_softirq_pending();


  parent reply	other threads:[~2021-03-09  8:58 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-09  8:55 [patch V3 0/6] softirq: Add RT specific softirq accounting Thomas Gleixner
2021-03-09  8:55 ` [patch V3 1/6] " Thomas Gleixner
2021-03-17 15:48   ` [tip: irq/core] " tip-bot2 for Thomas Gleixner
2021-03-09  8:55 ` [patch V3 2/6] irqtime: Make accounting correct on RT Thomas Gleixner
2021-03-17 15:48   ` [tip: irq/core] " tip-bot2 for Thomas Gleixner
2021-03-09  8:55 ` [patch V3 3/6] softirq: Move various protections into inline helpers Thomas Gleixner
2021-03-17 15:48   ` [tip: irq/core] " tip-bot2 for Thomas Gleixner
2021-03-09  8:55 ` Thomas Gleixner [this message]
2021-03-17 15:48   ` [tip: irq/core] softirq: Make softirq control and processing RT aware tip-bot2 for Thomas Gleixner
2021-03-09  8:55 ` [patch V3 5/6] tick/sched: Prevent false positive softirq pending warnings on RT Thomas Gleixner
2021-03-17 15:48   ` [tip: irq/core] " tip-bot2 for Thomas Gleixner
2021-03-09  8:55 ` [patch V3 6/6] rcu: Prevent false positive softirq warning " Thomas Gleixner
2021-03-09 13:06   ` Frederic Weisbecker
2021-03-17 15:48   ` [tip: irq/core] " tip-bot2 for Thomas Gleixner
2021-03-09 14:07 ` [patch V3 0/6] softirq: Add RT specific softirq accounting Peter Zijlstra
2021-03-09 21:32 ` Paul E. McKenney

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210309085727.426370483@linutronix.de \
    --to=tglx@linutronix.de \
    --cc=bigeasy@linutronix.de \
    --cc=frederic@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=paulmck@kernel.org \
    --cc=peterz@infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.