[PATCH net] net: dsa: bcm_sf2: Qualify phydev->dev_flags based on port

From: Florian Fainelli <f.fainelli@gmail.com>
To: netdev@vger.kernel.org
Cc: Florian Fainelli <f.fainelli@gmail.com>,
	Andrew Lunn <andrew@lunn.ch>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	linux-kernel@vger.kernel.org (open list)
Subject: [PATCH net] net: dsa: bcm_sf2: Qualify phydev->dev_flags based on port
Date: Wed, 10 Mar 2021 14:17:58 -0800	[thread overview]
Message-ID: <20210310221758.2969808-1-f.fainelli@gmail.com> (raw)

Similar to commit 92696286f3bb37ba50e4bd8d1beb24afb759a799 ("net:
bcmgenet: Set phydev->dev_flags only for internal PHYs") we need to
qualify the phydev->dev_flags based on whether the port is connected to
an internal or external PHY otherwise we risk having a flags collision
with a completely different interpretation depending on the driver.

Fixes: aa9aef77c761 ("net: dsa: bcm_sf2: communicate integrated PHY revision to PHY driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/dsa/bcm_sf2.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 1277e5f48b7f..321924a241f8 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -643,7 +643,10 @@ static u32 bcm_sf2_sw_get_phy_flags(struct dsa_switch *ds, int port)
 	 * in bits 15:8 and the patch level in bits 7:0 which is exactly what
 	 * the REG_PHY_REVISION register layout is.
 	 */
-	return priv->hw_params.gphy_rev;
+	if (priv->int_phy_mask & BIT(port))
+		return priv->hw_params.gphy_rev;
+	else
+		return 0;
 }
 
 static void bcm_sf2_sw_validate(struct dsa_switch *ds, int port,
-- 
2.25.1

