All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Ohad Ben-Cohen <ohad@wizery.com>,
	Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: linux-arm-msm@vger.kernel.org, linux-remoteproc@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Anibal Limon <anibal.limon@linaro.org>,
	Loic Poulain <loic.poulain@linaro.org>
Subject: [PATCH] remoteproc: qcom: wcnss: Fix race with iris probe
Date: Thu, 11 Mar 2021 16:22:51 -0800	[thread overview]
Message-ID: <20210312002251.3273013-1-bjorn.andersson@linaro.org> (raw)

The remoteproc driver is split between the responsibilities of getting
the SoC-internal ARM core up and running and the external RF (aka
"Iris") part configured.

In order to satisfy the regulator framework's need of a struct device *
to look up supplies this was implemented as two different drivers, using
of_platform_populate() in the remoteproc part to probe the iris part.

Unfortunately it's possible that the iris part probe defers on yet not
available regulators and an attempt to start the remoteproc will have to
be rejected, until this has been resolved. But there's no useful
mechanism of knowing when this would be.

Instead replace the of_platform_populate() and the iris probe with a
function that rolls its own struct device, with the relevant of_node
associated that is enough to acquire regulators and clocks specified in
the DT node and that may propagate the EPROBE_DEFER back to the wcnss
device's probe.

Reported-by: Anibal Limon <anibal.limon@linaro.org>
Reported-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 drivers/remoteproc/qcom_wcnss.c      |  52 ++++--------
 drivers/remoteproc/qcom_wcnss.h      |   4 +-
 drivers/remoteproc/qcom_wcnss_iris.c | 120 +++++++++++++++++----------
 3 files changed, 91 insertions(+), 85 deletions(-)

diff --git a/drivers/remoteproc/qcom_wcnss.c b/drivers/remoteproc/qcom_wcnss.c
index e8007cc01bfa..2f482ab6aade 100644
--- a/drivers/remoteproc/qcom_wcnss.c
+++ b/drivers/remoteproc/qcom_wcnss.c
@@ -142,18 +142,6 @@ static const struct wcnss_data pronto_v2_data = {
 	.num_vregs = 1,
 };
 
-void qcom_wcnss_assign_iris(struct qcom_wcnss *wcnss,
-			    struct qcom_iris *iris,
-			    bool use_48mhz_xo)
-{
-	mutex_lock(&wcnss->iris_lock);
-
-	wcnss->iris = iris;
-	wcnss->use_48mhz_xo = use_48mhz_xo;
-
-	mutex_unlock(&wcnss->iris_lock);
-}
-
 static int wcnss_load(struct rproc *rproc, const struct firmware *fw)
 {
 	struct qcom_wcnss *wcnss = (struct qcom_wcnss *)rproc->priv;
@@ -639,12 +627,20 @@ static int wcnss_probe(struct platform_device *pdev)
 		goto detach_pds;
 	}
 
+	wcnss->iris = qcom_iris_probe(&pdev->dev, &wcnss->use_48mhz_xo);
+	if (IS_ERR(wcnss->iris)) {
+		ret = PTR_ERR(wcnss->iris);
+		goto detach_pds;
+	}
+
 	ret = rproc_add(rproc);
 	if (ret)
-		goto detach_pds;
+		goto remove_iris;
 
-	return of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
+	return 0;
 
+remove_iris:
+	qcom_iris_remove(wcnss->iris);
 detach_pds:
 	wcnss_release_pds(wcnss);
 free_rproc:
@@ -657,9 +653,10 @@ static int wcnss_remove(struct platform_device *pdev)
 {
 	struct qcom_wcnss *wcnss = platform_get_drvdata(pdev);
 
-	of_platform_depopulate(&pdev->dev);
+	qcom_iris_remove(wcnss->iris);
 
-	qcom_smem_state_put(wcnss->state);
+	if (wcnss->state)
+		qcom_smem_state_put(wcnss->state);
 	rproc_del(wcnss->rproc);
 
 	qcom_remove_sysmon_subdev(wcnss->sysmon);
@@ -687,28 +684,7 @@ static struct platform_driver wcnss_driver = {
 	},
 };
 
-static int __init wcnss_init(void)
-{
-	int ret;
-
-	ret = platform_driver_register(&wcnss_driver);
-	if (ret)
-		return ret;
-
-	ret = platform_driver_register(&qcom_iris_driver);
-	if (ret)
-		platform_driver_unregister(&wcnss_driver);
-
-	return ret;
-}
-module_init(wcnss_init);
-
-static void __exit wcnss_exit(void)
-{
-	platform_driver_unregister(&qcom_iris_driver);
-	platform_driver_unregister(&wcnss_driver);
-}
-module_exit(wcnss_exit);
+module_platform_driver(wcnss_driver);
 
 MODULE_DESCRIPTION("Qualcomm Peripheral Image Loader for Wireless Subsystem");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/remoteproc/qcom_wcnss.h b/drivers/remoteproc/qcom_wcnss.h
index 62c8682d0a92..6d01ee6afa7f 100644
--- a/drivers/remoteproc/qcom_wcnss.h
+++ b/drivers/remoteproc/qcom_wcnss.h
@@ -17,9 +17,9 @@ struct wcnss_vreg_info {
 	bool super_turbo;
 };
 
+struct qcom_iris *qcom_iris_probe(struct device *parent, bool *use_48mhz_xo);
+void qcom_iris_remove(struct qcom_iris *iris);
 int qcom_iris_enable(struct qcom_iris *iris);
 void qcom_iris_disable(struct qcom_iris *iris);
 
-void qcom_wcnss_assign_iris(struct qcom_wcnss *wcnss, struct qcom_iris *iris, bool use_48mhz_xo);
-
 #endif
diff --git a/drivers/remoteproc/qcom_wcnss_iris.c b/drivers/remoteproc/qcom_wcnss_iris.c
index 169acd305ae3..09720ddddc85 100644
--- a/drivers/remoteproc/qcom_wcnss_iris.c
+++ b/drivers/remoteproc/qcom_wcnss_iris.c
@@ -17,7 +17,7 @@
 #include "qcom_wcnss.h"
 
 struct qcom_iris {
-	struct device *dev;
+	struct device dev;
 
 	struct clk *xo_clk;
 
@@ -75,7 +75,7 @@ int qcom_iris_enable(struct qcom_iris *iris)
 
 	ret = clk_prepare_enable(iris->xo_clk);
 	if (ret) {
-		dev_err(iris->dev, "failed to enable xo clk\n");
+		dev_err(&iris->dev, "failed to enable xo clk\n");
 		goto disable_regulators;
 	}
 
@@ -93,43 +93,90 @@ void qcom_iris_disable(struct qcom_iris *iris)
 	regulator_bulk_disable(iris->num_vregs, iris->vregs);
 }
 
-static int qcom_iris_probe(struct platform_device *pdev)
+static const struct of_device_id iris_of_match[] = {
+	{ .compatible = "qcom,wcn3620", .data = &wcn3620_data },
+	{ .compatible = "qcom,wcn3660", .data = &wcn3660_data },
+	{ .compatible = "qcom,wcn3660b", .data = &wcn3680_data },
+	{ .compatible = "qcom,wcn3680", .data = &wcn3680_data },
+	{}
+};
+
+static void qcom_iris_release(struct device *dev)
+{
+	struct qcom_iris *iris = container_of(dev, struct qcom_iris, dev);
+
+	of_node_put(iris->dev.of_node);
+	kfree(iris);
+}
+
+struct qcom_iris *qcom_iris_probe(struct device *parent, bool *use_48mhz_xo)
 {
+	const struct of_device_id *match;
 	const struct iris_data *data;
-	struct qcom_wcnss *wcnss;
+	struct device_node *of_node;
 	struct qcom_iris *iris;
 	int ret;
 	int i;
 
-	iris = devm_kzalloc(&pdev->dev, sizeof(struct qcom_iris), GFP_KERNEL);
-	if (!iris)
-		return -ENOMEM;
+	of_node = of_get_child_by_name(parent->of_node, "iris");
+	if (!of_node) {
+		dev_err(parent, "No child node \"iris\" found\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	iris = kzalloc(sizeof(*iris), GFP_KERNEL);
+	if (!iris) {
+		of_node_put(of_node);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	device_initialize(&iris->dev);
+	iris->dev.parent = parent;
+	iris->dev.release = qcom_iris_release;
+	iris->dev.of_node = of_node;
+
+	dev_set_name(&iris->dev, "%s.iris", dev_name(parent));
+
+	ret = device_add(&iris->dev);
+	if (ret) {
+		put_device(&iris->dev);
+		return ERR_PTR(ret);
+	}
+
+	match = of_match_device(iris_of_match, &iris->dev);
+	if (!match) {
+		dev_err(&iris->dev, "no matching compatible for iris\n");
+		ret = -EINVAL;
+		goto err_device_del;
+	}
 
-	data = of_device_get_match_data(&pdev->dev);
-	wcnss = dev_get_drvdata(pdev->dev.parent);
+	data = match->data;
 
-	iris->xo_clk = devm_clk_get(&pdev->dev, "xo");
+	iris->xo_clk = devm_clk_get(&iris->dev, "xo");
 	if (IS_ERR(iris->xo_clk)) {
-		if (PTR_ERR(iris->xo_clk) != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "failed to acquire xo clk\n");
-		return PTR_ERR(iris->xo_clk);
+		ret = PTR_ERR(iris->xo_clk);
+		if (ret != -EPROBE_DEFER)
+			dev_err(&iris->dev, "failed to acquire xo clk\n");
+		goto err_device_del;
 	}
 
 	iris->num_vregs = data->num_vregs;
-	iris->vregs = devm_kcalloc(&pdev->dev,
+	iris->vregs = devm_kcalloc(&iris->dev,
 				   iris->num_vregs,
 				   sizeof(struct regulator_bulk_data),
 				   GFP_KERNEL);
-	if (!iris->vregs)
-		return -ENOMEM;
+	if (!iris->vregs) {
+		ret = -ENOMEM;
+		goto err_device_del;
+	}
 
 	for (i = 0; i < iris->num_vregs; i++)
 		iris->vregs[i].supply = data->vregs[i].name;
 
-	ret = devm_regulator_bulk_get(&pdev->dev, iris->num_vregs, iris->vregs);
+	ret = devm_regulator_bulk_get(&iris->dev, iris->num_vregs, iris->vregs);
 	if (ret) {
-		dev_err(&pdev->dev, "failed to get regulators\n");
-		return ret;
+		dev_err(&iris->dev, "failed to get regulators\n");
+		goto err_device_del;
 	}
 
 	for (i = 0; i < iris->num_vregs; i++) {
@@ -143,34 +190,17 @@ static int qcom_iris_probe(struct platform_device *pdev)
 					   data->vregs[i].load_uA);
 	}
 
-	qcom_wcnss_assign_iris(wcnss, iris, data->use_48mhz_xo);
-
-	return 0;
-}
+	*use_48mhz_xo = data->use_48mhz_xo;
 
-static int qcom_iris_remove(struct platform_device *pdev)
-{
-	struct qcom_wcnss *wcnss = dev_get_drvdata(pdev->dev.parent);
+	return iris;
 
-	qcom_wcnss_assign_iris(wcnss, NULL, false);
+err_device_del:
+	device_del(&iris->dev);
 
-	return 0;
+	return ERR_PTR(ret);
 }
 
-static const struct of_device_id iris_of_match[] = {
-	{ .compatible = "qcom,wcn3620", .data = &wcn3620_data },
-	{ .compatible = "qcom,wcn3660", .data = &wcn3660_data },
-	{ .compatible = "qcom,wcn3660b", .data = &wcn3680_data },
-	{ .compatible = "qcom,wcn3680", .data = &wcn3680_data },
-	{}
-};
-MODULE_DEVICE_TABLE(of, iris_of_match);
-
-struct platform_driver qcom_iris_driver = {
-	.probe = qcom_iris_probe,
-	.remove = qcom_iris_remove,
-	.driver = {
-		.name = "qcom-iris",
-		.of_match_table = iris_of_match,
-	},
-};
+void qcom_iris_remove(struct qcom_iris *iris)
+{
+	device_del(&iris->dev);
+}
-- 
2.29.2


             reply	other threads:[~2021-03-12  0:22 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-12  0:22 Bjorn Andersson [this message]
2021-03-15 16:40 ` [PATCH] remoteproc: qcom: wcnss: Fix race with iris probe Mathieu Poirier
2021-03-18  2:10 ` Aníbal Limón

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210312002251.3273013-1-bjorn.andersson@linaro.org \
    --to=bjorn.andersson@linaro.org \
    --cc=agross@kernel.org \
    --cc=anibal.limon@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=loic.poulain@linaro.org \
    --cc=mathieu.poirier@linaro.org \
    --cc=ohad@wizery.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.