All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: bjorn.andersson@linaro.org, ohad@wizery.com
Cc: arnaud.pouliquen@st.com, mcoquelin.stm32@gmail.com,
	alexandre.torgue@st.com, linux-remoteproc@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v8 05/17] remoteproc: Add new get_loaded_rsc_table() to rproc_ops
Date: Fri, 12 Mar 2021 09:24:41 -0700	[thread overview]
Message-ID: <20210312162453.1234145-6-mathieu.poirier@linaro.org> (raw)
In-Reply-To: <20210312162453.1234145-1-mathieu.poirier@linaro.org>

Add a new get_loaded_rsc_table() operation in order to support
scenarios where the remoteproc core has booted a remote processor
and detaches from it.  When re-attaching to the remote processor,
the core needs to know where the resource table has been placed
in memory.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
---
 drivers/remoteproc/remoteproc_core.c     | 32 ++++++++++++++++++++++++
 drivers/remoteproc/remoteproc_internal.h | 10 ++++++++
 include/linux/remoteproc.h               |  6 ++++-
 3 files changed, 47 insertions(+), 1 deletion(-)

diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index 8c7e9f1d50d7..bf6f6d15b1c3 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -1537,6 +1537,32 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
 	return ret;
 }
 
+static int rproc_set_rsc_table(struct rproc *rproc)
+{
+	struct resource_table *table_ptr;
+	struct device *dev = &rproc->dev;
+	size_t table_sz;
+	int ret;
+
+	table_ptr = rproc_get_loaded_rsc_table(rproc, &table_sz);
+	if (!table_ptr) {
+		/* Not having a resource table is acceptable */
+		return 0;
+	}
+
+	if (IS_ERR(table_ptr)) {
+		ret = PTR_ERR(table_ptr);
+		dev_err(dev, "can't load resource table: %d\n", ret);
+		return ret;
+	}
+
+	rproc->cached_table = NULL;
+	rproc->table_ptr = table_ptr;
+	rproc->table_sz = table_sz;
+
+	return 0;
+}
+
 /*
  * Attach to remote processor - similar to rproc_fw_boot() but without
  * the steps that deal with the firmware image.
@@ -1556,6 +1582,12 @@ static int rproc_attach(struct rproc *rproc)
 		return ret;
 	}
 
+	ret = rproc_set_rsc_table(rproc);
+	if (ret) {
+		dev_err(dev, "can't load resource table: %d\n", ret);
+		goto disable_iommu;
+	}
+
 	/* reset max_notifyid */
 	rproc->max_notifyid = -1;
 
diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h
index c34002888d2c..4f73aac7e60d 100644
--- a/drivers/remoteproc/remoteproc_internal.h
+++ b/drivers/remoteproc/remoteproc_internal.h
@@ -177,6 +177,16 @@ struct resource_table *rproc_find_loaded_rsc_table(struct rproc *rproc,
 	return NULL;
 }
 
+static inline
+struct resource_table *rproc_get_loaded_rsc_table(struct rproc *rproc,
+						  size_t *size)
+{
+	if (rproc->ops->get_loaded_rsc_table)
+		return rproc->ops->get_loaded_rsc_table(rproc, size);
+
+	return NULL;
+}
+
 static inline
 bool rproc_u64_fit_in_size_t(u64 val)
 {
diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
index 6b0a0ed30a03..51538a7d120d 100644
--- a/include/linux/remoteproc.h
+++ b/include/linux/remoteproc.h
@@ -368,7 +368,9 @@ enum rsc_handling_status {
  * RSC_HANDLED if resource was handled, RSC_IGNORED if not handled and a
  * negative value on error
  * @load_rsc_table:	load resource table from firmware image
- * @find_loaded_rsc_table: find the loaded resouce table
+ * @find_loaded_rsc_table: find the loaded resource table from firmware image
+ * @get_loaded_rsc_table: get resource table installed in memory
+ *			  by external entity
  * @load:		load firmware to memory, where the remote processor
  *			expects to find it
  * @sanity_check:	sanity check the fw image
@@ -390,6 +392,8 @@ struct rproc_ops {
 			  int offset, int avail);
 	struct resource_table *(*find_loaded_rsc_table)(
 				struct rproc *rproc, const struct firmware *fw);
+	struct resource_table *(*get_loaded_rsc_table)(
+				struct rproc *rproc, size_t *size);
 	int (*load)(struct rproc *rproc, const struct firmware *fw);
 	int (*sanity_check)(struct rproc *rproc, const struct firmware *fw);
 	u64 (*get_boot_addr)(struct rproc *rproc, const struct firmware *fw);
-- 
2.25.1


WARNING: multiple messages have this Message-ID (diff)
From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: bjorn.andersson@linaro.org, ohad@wizery.com
Cc: arnaud.pouliquen@st.com, mcoquelin.stm32@gmail.com,
	alexandre.torgue@st.com, linux-remoteproc@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v8 05/17] remoteproc: Add new get_loaded_rsc_table() to rproc_ops
Date: Fri, 12 Mar 2021 09:24:41 -0700	[thread overview]
Message-ID: <20210312162453.1234145-6-mathieu.poirier@linaro.org> (raw)
In-Reply-To: <20210312162453.1234145-1-mathieu.poirier@linaro.org>

Add a new get_loaded_rsc_table() operation in order to support
scenarios where the remoteproc core has booted a remote processor
and detaches from it.  When re-attaching to the remote processor,
the core needs to know where the resource table has been placed
in memory.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
---
 drivers/remoteproc/remoteproc_core.c     | 32 ++++++++++++++++++++++++
 drivers/remoteproc/remoteproc_internal.h | 10 ++++++++
 include/linux/remoteproc.h               |  6 ++++-
 3 files changed, 47 insertions(+), 1 deletion(-)

diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index 8c7e9f1d50d7..bf6f6d15b1c3 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -1537,6 +1537,32 @@ static int rproc_fw_boot(struct rproc *rproc, const struct firmware *fw)
 	return ret;
 }
 
+static int rproc_set_rsc_table(struct rproc *rproc)
+{
+	struct resource_table *table_ptr;
+	struct device *dev = &rproc->dev;
+	size_t table_sz;
+	int ret;
+
+	table_ptr = rproc_get_loaded_rsc_table(rproc, &table_sz);
+	if (!table_ptr) {
+		/* Not having a resource table is acceptable */
+		return 0;
+	}
+
+	if (IS_ERR(table_ptr)) {
+		ret = PTR_ERR(table_ptr);
+		dev_err(dev, "can't load resource table: %d\n", ret);
+		return ret;
+	}
+
+	rproc->cached_table = NULL;
+	rproc->table_ptr = table_ptr;
+	rproc->table_sz = table_sz;
+
+	return 0;
+}
+
 /*
  * Attach to remote processor - similar to rproc_fw_boot() but without
  * the steps that deal with the firmware image.
@@ -1556,6 +1582,12 @@ static int rproc_attach(struct rproc *rproc)
 		return ret;
 	}
 
+	ret = rproc_set_rsc_table(rproc);
+	if (ret) {
+		dev_err(dev, "can't load resource table: %d\n", ret);
+		goto disable_iommu;
+	}
+
 	/* reset max_notifyid */
 	rproc->max_notifyid = -1;
 
diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h
index c34002888d2c..4f73aac7e60d 100644
--- a/drivers/remoteproc/remoteproc_internal.h
+++ b/drivers/remoteproc/remoteproc_internal.h
@@ -177,6 +177,16 @@ struct resource_table *rproc_find_loaded_rsc_table(struct rproc *rproc,
 	return NULL;
 }
 
+static inline
+struct resource_table *rproc_get_loaded_rsc_table(struct rproc *rproc,
+						  size_t *size)
+{
+	if (rproc->ops->get_loaded_rsc_table)
+		return rproc->ops->get_loaded_rsc_table(rproc, size);
+
+	return NULL;
+}
+
 static inline
 bool rproc_u64_fit_in_size_t(u64 val)
 {
diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
index 6b0a0ed30a03..51538a7d120d 100644
--- a/include/linux/remoteproc.h
+++ b/include/linux/remoteproc.h
@@ -368,7 +368,9 @@ enum rsc_handling_status {
  * RSC_HANDLED if resource was handled, RSC_IGNORED if not handled and a
  * negative value on error
  * @load_rsc_table:	load resource table from firmware image
- * @find_loaded_rsc_table: find the loaded resouce table
+ * @find_loaded_rsc_table: find the loaded resource table from firmware image
+ * @get_loaded_rsc_table: get resource table installed in memory
+ *			  by external entity
  * @load:		load firmware to memory, where the remote processor
  *			expects to find it
  * @sanity_check:	sanity check the fw image
@@ -390,6 +392,8 @@ struct rproc_ops {
 			  int offset, int avail);
 	struct resource_table *(*find_loaded_rsc_table)(
 				struct rproc *rproc, const struct firmware *fw);
+	struct resource_table *(*get_loaded_rsc_table)(
+				struct rproc *rproc, size_t *size);
 	int (*load)(struct rproc *rproc, const struct firmware *fw);
 	int (*sanity_check)(struct rproc *rproc, const struct firmware *fw);
 	u64 (*get_boot_addr)(struct rproc *rproc, const struct firmware *fw);
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2021-03-12 16:26 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-12 16:24 [PATCH v8 00/17] remoteproc: Add support for detaching a remote processor Mathieu Poirier
2021-03-12 16:24 ` Mathieu Poirier
2021-03-12 16:24 ` [PATCH v8 01/17] remoteproc: Remove useless check in rproc_del() Mathieu Poirier
2021-03-12 16:24   ` Mathieu Poirier
2021-03-12 16:24 ` [PATCH v8 02/17] remoteproc: Rename function rproc_actuate() Mathieu Poirier
2021-03-12 16:24   ` Mathieu Poirier
2021-03-12 16:24 ` [PATCH v8 03/17] remoteproc: Add new RPROC_ATTACHED state Mathieu Poirier
2021-03-12 16:24   ` Mathieu Poirier
2021-03-12 16:24 ` [PATCH v8 04/17] remoteproc: Properly represent the attached state Mathieu Poirier
2021-03-12 16:24   ` Mathieu Poirier
2021-03-12 16:24 ` Mathieu Poirier [this message]
2021-03-12 16:24   ` [PATCH v8 05/17] remoteproc: Add new get_loaded_rsc_table() to rproc_ops Mathieu Poirier
2021-03-12 16:24 ` [PATCH v8 06/17] remoteproc: stm32: Move resource table setup " Mathieu Poirier
2021-03-12 16:24   ` Mathieu Poirier
2021-03-12 16:24 ` [PATCH v8 07/17] remoteproc: stm32: Move memory parsing " Mathieu Poirier
2021-03-12 16:24   ` Mathieu Poirier
2021-03-12 16:24 ` [PATCH v8 08/17] remoteproc: Add new detach() remoteproc operation Mathieu Poirier
2021-03-12 16:24   ` Mathieu Poirier
2021-03-12 16:24 ` [PATCH v8 09/17] remoteproc: Introduce function __rproc_detach() Mathieu Poirier
2021-03-12 16:24   ` Mathieu Poirier
2021-03-12 16:24 ` [PATCH v8 10/17] remoteproc: Introduce function rproc_detach() Mathieu Poirier
2021-03-12 16:24   ` Mathieu Poirier
2021-03-12 16:24 ` [PATCH v8 11/17] remoteproc: Properly deal with the resource table when detaching Mathieu Poirier
2021-03-12 16:24   ` Mathieu Poirier
2021-03-12 16:24 ` [PATCH v8 12/17] remoteproc: Properly deal with the resource table when stopping Mathieu Poirier
2021-03-12 16:24   ` Mathieu Poirier
2021-03-12 16:24 ` [PATCH v8 13/17] remoteproc: Properly deal with a kernel panic when attached Mathieu Poirier
2021-03-12 16:24   ` Mathieu Poirier
2021-03-12 16:24 ` [PATCH v8 14/17] remoteproc: Properly deal with a start request " Mathieu Poirier
2021-03-12 16:24   ` Mathieu Poirier
2021-03-12 16:24 ` [PATCH v8 15/17] remoteproc: Properly deal with a stop " Mathieu Poirier
2021-03-12 16:24   ` Mathieu Poirier
2021-03-12 16:24 ` [PATCH v8 16/17] remoteproc: Properly deal with a detach " Mathieu Poirier
2021-03-12 16:24   ` Mathieu Poirier
2021-03-12 16:24 ` [PATCH v8 17/17] remoteproc: Refactor function rproc_cdev_release() Mathieu Poirier
2021-03-12 16:24   ` Mathieu Poirier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210312162453.1234145-6-mathieu.poirier@linaro.org \
    --to=mathieu.poirier@linaro.org \
    --cc=alexandre.torgue@st.com \
    --cc=arnaud.pouliquen@st.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=ohad@wizery.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.