From: Geert Uytterhoeven <geert+renesas@glider.be> To: Magnus Damm <magnus.damm@gmail.com>, Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>, Wolfram Sang <wsa+renesas@sang-engineering.com>, Hoang Vo <hoang.vo.eb@renesas.com> Cc: linux-renesas-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Geert Uytterhoeven <geert+renesas@glider.be> Subject: [PATCH 3/3] arm64: dts: renesas: falcon: Move AVB0 to main DTS Date: Tue, 16 Mar 2021 16:47:05 +0100 [thread overview] Message-ID: <20210316154705.2433528-4-geert+renesas@glider.be> (raw) In-Reply-To: <20210316154705.2433528-1-geert+renesas@glider.be> The Ethernet PHY for the first AVB instance is located on the Falcon BreakOut board. Hence move its description from the DTS file that describes the CPU board to the main Falcon DTS file. Fixes: e8ac55a5e70a9522 ("arm64: dts: renesas: falcon: Add Ethernet-AVB0 support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- .../boot/dts/renesas/r8a779a0-falcon-cpu.dtsi | 34 ----------------- .../boot/dts/renesas/r8a779a0-falcon.dts | 37 +++++++++++++++++++ 2 files changed, 37 insertions(+), 34 deletions(-) diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi index 97d40e3e05ff3b1b..e9133f9348df8969 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi @@ -60,22 +60,6 @@ reg_3p3v: regulator-3p3v { }; }; -&avb0 { - pinctrl-0 = <&avb0_pins>; - pinctrl-names = "default"; - phy-handle = <&phy0>; - tx-internal-delay-ps = <2000>; - status = "okay"; - - phy0: ethernet-phy@0 { - rxc-skew-ps = <1500>; - reg = <0>; - interrupt-parent = <&gpio4>; - interrupts = <16 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; - }; -}; - &extal_clk { clock-frequency = <16666666>; }; @@ -136,24 +120,6 @@ &pfc { pinctrl-0 = <&scif_clk_pins>; pinctrl-names = "default"; - avb0_pins: avb0 { - mux { - groups = "avb0_link", "avb0_mdio", "avb0_rgmii", "avb0_txcrefclk"; - function = "avb0"; - }; - - pins_mdio { - groups = "avb0_mdio"; - drive-strength = <21>; - }; - - pins_mii { - groups = "avb0_rgmii"; - drive-strength = <21>; - }; - - }; - i2c0_pins: i2c0 { groups = "i2c0"; function = "i2c0"; diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts index 04cd2ae5b4f4892e..687f019e79f059a1 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts +++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts @@ -19,6 +19,22 @@ aliases { }; }; +&avb0 { + pinctrl-0 = <&avb0_pins>; + pinctrl-names = "default"; + phy-handle = <&phy0>; + tx-internal-delay-ps = <2000>; + status = "okay"; + + phy0: ethernet-phy@0 { + rxc-skew-ps = <1500>; + reg = <0>; + interrupt-parent = <&gpio4>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; + }; +}; + &i2c0 { eeprom@51 { compatible = "rohm,br24g01", "atmel,24c01"; @@ -27,3 +43,24 @@ eeprom@51 { pagesize = <8>; }; }; + +&pfc { + avb0_pins: avb0 { + mux { + groups = "avb0_link", "avb0_mdio", "avb0_rgmii", + "avb0_txcrefclk"; + function = "avb0"; + }; + + pins_mdio { + groups = "avb0_mdio"; + drive-strength = <21>; + }; + + pins_mii { + groups = "avb0_rgmii"; + drive-strength = <21>; + }; + + }; +}; -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Geert Uytterhoeven <geert+renesas@glider.be> To: Magnus Damm <magnus.damm@gmail.com>, Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>, Wolfram Sang <wsa+renesas@sang-engineering.com>, Hoang Vo <hoang.vo.eb@renesas.com> Cc: linux-renesas-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Geert Uytterhoeven <geert+renesas@glider.be> Subject: [PATCH 3/3] arm64: dts: renesas: falcon: Move AVB0 to main DTS Date: Tue, 16 Mar 2021 16:47:05 +0100 [thread overview] Message-ID: <20210316154705.2433528-4-geert+renesas@glider.be> (raw) In-Reply-To: <20210316154705.2433528-1-geert+renesas@glider.be> The Ethernet PHY for the first AVB instance is located on the Falcon BreakOut board. Hence move its description from the DTS file that describes the CPU board to the main Falcon DTS file. Fixes: e8ac55a5e70a9522 ("arm64: dts: renesas: falcon: Add Ethernet-AVB0 support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- .../boot/dts/renesas/r8a779a0-falcon-cpu.dtsi | 34 ----------------- .../boot/dts/renesas/r8a779a0-falcon.dts | 37 +++++++++++++++++++ 2 files changed, 37 insertions(+), 34 deletions(-) diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi index 97d40e3e05ff3b1b..e9133f9348df8969 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi @@ -60,22 +60,6 @@ reg_3p3v: regulator-3p3v { }; }; -&avb0 { - pinctrl-0 = <&avb0_pins>; - pinctrl-names = "default"; - phy-handle = <&phy0>; - tx-internal-delay-ps = <2000>; - status = "okay"; - - phy0: ethernet-phy@0 { - rxc-skew-ps = <1500>; - reg = <0>; - interrupt-parent = <&gpio4>; - interrupts = <16 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; - }; -}; - &extal_clk { clock-frequency = <16666666>; }; @@ -136,24 +120,6 @@ &pfc { pinctrl-0 = <&scif_clk_pins>; pinctrl-names = "default"; - avb0_pins: avb0 { - mux { - groups = "avb0_link", "avb0_mdio", "avb0_rgmii", "avb0_txcrefclk"; - function = "avb0"; - }; - - pins_mdio { - groups = "avb0_mdio"; - drive-strength = <21>; - }; - - pins_mii { - groups = "avb0_rgmii"; - drive-strength = <21>; - }; - - }; - i2c0_pins: i2c0 { groups = "i2c0"; function = "i2c0"; diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts index 04cd2ae5b4f4892e..687f019e79f059a1 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts +++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts @@ -19,6 +19,22 @@ aliases { }; }; +&avb0 { + pinctrl-0 = <&avb0_pins>; + pinctrl-names = "default"; + phy-handle = <&phy0>; + tx-internal-delay-ps = <2000>; + status = "okay"; + + phy0: ethernet-phy@0 { + rxc-skew-ps = <1500>; + reg = <0>; + interrupt-parent = <&gpio4>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; + }; +}; + &i2c0 { eeprom@51 { compatible = "rohm,br24g01", "atmel,24c01"; @@ -27,3 +43,24 @@ eeprom@51 { pagesize = <8>; }; }; + +&pfc { + avb0_pins: avb0 { + mux { + groups = "avb0_link", "avb0_mdio", "avb0_rgmii", + "avb0_txcrefclk"; + function = "avb0"; + }; + + pins_mdio { + groups = "avb0_mdio"; + drive-strength = <21>; + }; + + pins_mii { + groups = "avb0_rgmii"; + drive-strength = <21>; + }; + + }; +}; -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-03-16 15:47 UTC|newest] Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-03-16 15:47 [PATCH 0/3] arm64: dts: renesas: falcon: Restructuring Geert Uytterhoeven 2021-03-16 15:47 ` Geert Uytterhoeven 2021-03-16 15:47 ` [PATCH 1/3] arm64: dts: renesas: falcon: Move console config to CPU board DTS Geert Uytterhoeven 2021-03-16 15:47 ` Geert Uytterhoeven 2021-03-16 15:47 ` [PATCH 2/3] arm64: dts: renesas: falcon: Move watchdog " Geert Uytterhoeven 2021-03-16 15:47 ` Geert Uytterhoeven 2021-03-16 15:47 ` Geert Uytterhoeven [this message] 2021-03-16 15:47 ` [PATCH 3/3] arm64: dts: renesas: falcon: Move AVB0 to main DTS Geert Uytterhoeven 2021-03-17 8:37 ` [PATCH 0/3] arm64: dts: renesas: falcon: Restructuring Wolfram Sang 2021-03-17 8:37 ` Wolfram Sang 2021-03-17 9:03 ` Niklas Söderlund 2021-03-17 9:03 ` Niklas Söderlund
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210316154705.2433528-4-geert+renesas@glider.be \ --to=geert+renesas@glider.be \ --cc=hoang.vo.eb@renesas.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-renesas-soc@vger.kernel.org \ --cc=magnus.damm@gmail.com \ --cc=wsa+renesas@sang-engineering.com \ --cc=yoshihiro.shimoda.uh@renesas.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.