[PATCH v3 net-next 5/8] net: dsa: mv88e6xxx: Use standard helper for broadcast address

[Tobias Waldekranz <tobias@waldekranz.com>]

Use the conventional declaration style of a MAC address in the
kernel (u8 addr[ETH_ALEN]) for the broadcast address, then set it
using the existing helper.

Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/dsa/mv88e6xxx/chip.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index c18c55e1617e..17578f774683 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -1968,8 +1968,10 @@ static int mv88e6xxx_set_rxnfc(struct dsa_switch *ds, int port,
 static int mv88e6xxx_port_add_broadcast(struct mv88e6xxx_chip *chip, int port,
 					u16 vid)
 {
-	const char broadcast[6] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
 	u8 state = MV88E6XXX_G1_ATU_DATA_STATE_MC_STATIC;
+	u8 broadcast[ETH_ALEN];
+
+	eth_broadcast_addr(broadcast);
 
 	return mv88e6xxx_port_db_load_purge(chip, port, broadcast, vid, state);
 }
-- 
2.25.1