From: Chuanjia Liu <chuanjia.liu@mediatek.com>
To: <robh+dt@kernel.org>, <bhelgaas@google.com>, <matthias.bgg@gmail.com>
Cc: <ryder.lee@mediatek.com>, <lorenzo.pieralisi@arm.com>,
<jianjun.wang@mediatek.com>, <chuanjia.liu@mediatek.com>,
<linux-pci@vger.kernel.org>, <linux-mediatek@lists.infradead.org>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>, <yong.wu@mediatek.com>,
<frank-w@public-files.de>
Subject: [PATCH v8 4/4] ARM: dts: mediatek: Update MT7629 PCIe node for new format
Date: Tue, 23 Mar 2021 11:38:33 +0800 [thread overview]
Message-ID: <20210323033833.14954-5-chuanjia.liu@mediatek.com> (raw)
In-Reply-To: <20210323033833.14954-1-chuanjia.liu@mediatek.com>
To match the new dts binding. Remove "subsys",unused
interrupt and slot node.Add "interrupt-names",
"linux,pci-domain" and pciecfg node.
Signed-off-by: Chuanjia Liu <chuanjia.liu@mediatek.com>
Acked-by: Ryder Lee <ryder.lee@mediatek.com>
---
arch/arm/boot/dts/mt7629-rfb.dts | 3 ++-
arch/arm/boot/dts/mt7629.dtsi | 45 +++++++++++++++-----------------
2 files changed, 23 insertions(+), 25 deletions(-)
diff --git a/arch/arm/boot/dts/mt7629-rfb.dts b/arch/arm/boot/dts/mt7629-rfb.dts
index 9980c10c6e29..eb536cbebd9b 100644
--- a/arch/arm/boot/dts/mt7629-rfb.dts
+++ b/arch/arm/boot/dts/mt7629-rfb.dts
@@ -140,9 +140,10 @@
};
};
-&pcie {
+&pcie1 {
pinctrl-names = "default";
pinctrl-0 = <&pcie_pins>;
+ status = "okay";
};
&pciephy1 {
diff --git a/arch/arm/boot/dts/mt7629.dtsi b/arch/arm/boot/dts/mt7629.dtsi
index 5cbb3d244c75..ca6789acf057 100644
--- a/arch/arm/boot/dts/mt7629.dtsi
+++ b/arch/arm/boot/dts/mt7629.dtsi
@@ -360,16 +360,21 @@
#reset-cells = <1>;
};
- pcie: pcie@1a140000 {
+ pciecfg: pciecfg@1a140000 {
+ compatible = "mediatek,generic-pciecfg", "syscon";
+ reg = <0x1a140000 0x1000>;
+ };
+
+ pcie1: pcie@1a145000 {
compatible = "mediatek,mt7629-pcie";
device_type = "pci";
- reg = <0x1a140000 0x1000>,
- <0x1a145000 0x1000>;
- reg-names = "subsys","port1";
+ reg = <0x1a145000 0x1000>;
+ reg-names = "port1";
+ linux,pci-domain = <1>;
#address-cells = <3>;
#size-cells = <2>;
- interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "pcie_irq";
clocks = <&pciesys CLK_PCIE_P1_MAC_EN>,
<&pciesys CLK_PCIE_P0_AHB_EN>,
<&pciesys CLK_PCIE_P1_AUX_EN>,
@@ -390,26 +395,18 @@
power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
bus-range = <0x00 0xff>;
ranges = <0x82000000 0 0x20000000 0x20000000 0 0x10000000>;
+ status = "disabled";
- pcie1: pcie@1,0 {
- device_type = "pci";
- reg = <0x0800 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+ <0 0 0 2 &pcie_intc1 1>,
+ <0 0 0 3 &pcie_intc1 2>,
+ <0 0 0 4 &pcie_intc1 3>;
+ pcie_intc1: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
#interrupt-cells = <1>;
- ranges;
- num-lanes = <1>;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0 0 0 1 &pcie_intc1 0>,
- <0 0 0 2 &pcie_intc1 1>,
- <0 0 0 3 &pcie_intc1 2>,
- <0 0 0 4 &pcie_intc1 3>;
-
- pcie_intc1: interrupt-controller {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <1>;
- };
};
};
--
2.18.0
WARNING: multiple messages have this Message-ID (diff)
From: Chuanjia Liu <chuanjia.liu@mediatek.com>
To: <robh+dt@kernel.org>, <bhelgaas@google.com>, <matthias.bgg@gmail.com>
Cc: <ryder.lee@mediatek.com>, <lorenzo.pieralisi@arm.com>,
<jianjun.wang@mediatek.com>, <chuanjia.liu@mediatek.com>,
<linux-pci@vger.kernel.org>, <linux-mediatek@lists.infradead.org>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>, <yong.wu@mediatek.com>,
<frank-w@public-files.de>
Subject: [PATCH v8 4/4] ARM: dts: mediatek: Update MT7629 PCIe node for new format
Date: Tue, 23 Mar 2021 11:38:33 +0800 [thread overview]
Message-ID: <20210323033833.14954-5-chuanjia.liu@mediatek.com> (raw)
In-Reply-To: <20210323033833.14954-1-chuanjia.liu@mediatek.com>
To match the new dts binding. Remove "subsys",unused
interrupt and slot node.Add "interrupt-names",
"linux,pci-domain" and pciecfg node.
Signed-off-by: Chuanjia Liu <chuanjia.liu@mediatek.com>
Acked-by: Ryder Lee <ryder.lee@mediatek.com>
---
arch/arm/boot/dts/mt7629-rfb.dts | 3 ++-
arch/arm/boot/dts/mt7629.dtsi | 45 +++++++++++++++-----------------
2 files changed, 23 insertions(+), 25 deletions(-)
diff --git a/arch/arm/boot/dts/mt7629-rfb.dts b/arch/arm/boot/dts/mt7629-rfb.dts
index 9980c10c6e29..eb536cbebd9b 100644
--- a/arch/arm/boot/dts/mt7629-rfb.dts
+++ b/arch/arm/boot/dts/mt7629-rfb.dts
@@ -140,9 +140,10 @@
};
};
-&pcie {
+&pcie1 {
pinctrl-names = "default";
pinctrl-0 = <&pcie_pins>;
+ status = "okay";
};
&pciephy1 {
diff --git a/arch/arm/boot/dts/mt7629.dtsi b/arch/arm/boot/dts/mt7629.dtsi
index 5cbb3d244c75..ca6789acf057 100644
--- a/arch/arm/boot/dts/mt7629.dtsi
+++ b/arch/arm/boot/dts/mt7629.dtsi
@@ -360,16 +360,21 @@
#reset-cells = <1>;
};
- pcie: pcie@1a140000 {
+ pciecfg: pciecfg@1a140000 {
+ compatible = "mediatek,generic-pciecfg", "syscon";
+ reg = <0x1a140000 0x1000>;
+ };
+
+ pcie1: pcie@1a145000 {
compatible = "mediatek,mt7629-pcie";
device_type = "pci";
- reg = <0x1a140000 0x1000>,
- <0x1a145000 0x1000>;
- reg-names = "subsys","port1";
+ reg = <0x1a145000 0x1000>;
+ reg-names = "port1";
+ linux,pci-domain = <1>;
#address-cells = <3>;
#size-cells = <2>;
- interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "pcie_irq";
clocks = <&pciesys CLK_PCIE_P1_MAC_EN>,
<&pciesys CLK_PCIE_P0_AHB_EN>,
<&pciesys CLK_PCIE_P1_AUX_EN>,
@@ -390,26 +395,18 @@
power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
bus-range = <0x00 0xff>;
ranges = <0x82000000 0 0x20000000 0x20000000 0 0x10000000>;
+ status = "disabled";
- pcie1: pcie@1,0 {
- device_type = "pci";
- reg = <0x0800 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+ <0 0 0 2 &pcie_intc1 1>,
+ <0 0 0 3 &pcie_intc1 2>,
+ <0 0 0 4 &pcie_intc1 3>;
+ pcie_intc1: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
#interrupt-cells = <1>;
- ranges;
- num-lanes = <1>;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0 0 0 1 &pcie_intc1 0>,
- <0 0 0 2 &pcie_intc1 1>,
- <0 0 0 3 &pcie_intc1 2>,
- <0 0 0 4 &pcie_intc1 3>;
-
- pcie_intc1: interrupt-controller {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <1>;
- };
};
};
--
2.18.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
WARNING: multiple messages have this Message-ID (diff)
From: Chuanjia Liu <chuanjia.liu@mediatek.com>
To: <robh+dt@kernel.org>, <bhelgaas@google.com>, <matthias.bgg@gmail.com>
Cc: <ryder.lee@mediatek.com>, <lorenzo.pieralisi@arm.com>,
<jianjun.wang@mediatek.com>, <chuanjia.liu@mediatek.com>,
<linux-pci@vger.kernel.org>, <linux-mediatek@lists.infradead.org>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>, <yong.wu@mediatek.com>,
<frank-w@public-files.de>
Subject: [PATCH v8 4/4] ARM: dts: mediatek: Update MT7629 PCIe node for new format
Date: Tue, 23 Mar 2021 11:38:33 +0800 [thread overview]
Message-ID: <20210323033833.14954-5-chuanjia.liu@mediatek.com> (raw)
In-Reply-To: <20210323033833.14954-1-chuanjia.liu@mediatek.com>
To match the new dts binding. Remove "subsys",unused
interrupt and slot node.Add "interrupt-names",
"linux,pci-domain" and pciecfg node.
Signed-off-by: Chuanjia Liu <chuanjia.liu@mediatek.com>
Acked-by: Ryder Lee <ryder.lee@mediatek.com>
---
arch/arm/boot/dts/mt7629-rfb.dts | 3 ++-
arch/arm/boot/dts/mt7629.dtsi | 45 +++++++++++++++-----------------
2 files changed, 23 insertions(+), 25 deletions(-)
diff --git a/arch/arm/boot/dts/mt7629-rfb.dts b/arch/arm/boot/dts/mt7629-rfb.dts
index 9980c10c6e29..eb536cbebd9b 100644
--- a/arch/arm/boot/dts/mt7629-rfb.dts
+++ b/arch/arm/boot/dts/mt7629-rfb.dts
@@ -140,9 +140,10 @@
};
};
-&pcie {
+&pcie1 {
pinctrl-names = "default";
pinctrl-0 = <&pcie_pins>;
+ status = "okay";
};
&pciephy1 {
diff --git a/arch/arm/boot/dts/mt7629.dtsi b/arch/arm/boot/dts/mt7629.dtsi
index 5cbb3d244c75..ca6789acf057 100644
--- a/arch/arm/boot/dts/mt7629.dtsi
+++ b/arch/arm/boot/dts/mt7629.dtsi
@@ -360,16 +360,21 @@
#reset-cells = <1>;
};
- pcie: pcie@1a140000 {
+ pciecfg: pciecfg@1a140000 {
+ compatible = "mediatek,generic-pciecfg", "syscon";
+ reg = <0x1a140000 0x1000>;
+ };
+
+ pcie1: pcie@1a145000 {
compatible = "mediatek,mt7629-pcie";
device_type = "pci";
- reg = <0x1a140000 0x1000>,
- <0x1a145000 0x1000>;
- reg-names = "subsys","port1";
+ reg = <0x1a145000 0x1000>;
+ reg-names = "port1";
+ linux,pci-domain = <1>;
#address-cells = <3>;
#size-cells = <2>;
- interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "pcie_irq";
clocks = <&pciesys CLK_PCIE_P1_MAC_EN>,
<&pciesys CLK_PCIE_P0_AHB_EN>,
<&pciesys CLK_PCIE_P1_AUX_EN>,
@@ -390,26 +395,18 @@
power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
bus-range = <0x00 0xff>;
ranges = <0x82000000 0 0x20000000 0x20000000 0 0x10000000>;
+ status = "disabled";
- pcie1: pcie@1,0 {
- device_type = "pci";
- reg = <0x0800 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+ <0 0 0 2 &pcie_intc1 1>,
+ <0 0 0 3 &pcie_intc1 2>,
+ <0 0 0 4 &pcie_intc1 3>;
+ pcie_intc1: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
#interrupt-cells = <1>;
- ranges;
- num-lanes = <1>;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0 0 0 1 &pcie_intc1 0>,
- <0 0 0 2 &pcie_intc1 1>,
- <0 0 0 3 &pcie_intc1 2>,
- <0 0 0 4 &pcie_intc1 3>;
-
- pcie_intc1: interrupt-controller {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <1>;
- };
};
};
--
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-03-23 3:40 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-23 3:38 [PATCH v8 0/4] PCI: mediatek: Spilt PCIe node to comply with hardware design Chuanjia Liu
2021-03-23 3:38 ` Chuanjia Liu
2021-03-23 3:38 ` Chuanjia Liu
2021-03-23 3:38 ` [PATCH v8 1/4] dt-bindings: PCI: mediatek: Update the Device tree bindings Chuanjia Liu
2021-03-23 3:38 ` Chuanjia Liu
2021-03-23 3:38 ` Chuanjia Liu
2021-03-26 20:17 ` Rob Herring
2021-03-26 20:17 ` Rob Herring
2021-03-26 20:17 ` Rob Herring
2021-03-23 3:38 ` [PATCH v8 2/4] PCI: mediatek: Add new method to get shared pcie-cfg base address and parse node Chuanjia Liu
2021-03-23 3:38 ` Chuanjia Liu
2021-03-23 3:38 ` Chuanjia Liu
2021-03-26 20:17 ` Rob Herring
2021-03-26 20:17 ` Rob Herring
2021-03-26 20:17 ` Rob Herring
2021-03-23 3:38 ` [PATCH v8 3/4] arm64: dts: mediatek: Split PCIe node for MT2712 and MT7622 Chuanjia Liu
2021-03-23 3:38 ` Chuanjia Liu
2021-03-23 3:38 ` Chuanjia Liu
2021-03-23 3:38 ` Chuanjia Liu [this message]
2021-03-23 3:38 ` [PATCH v8 4/4] ARM: dts: mediatek: Update MT7629 PCIe node for new format Chuanjia Liu
2021-03-23 3:38 ` Chuanjia Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210323033833.14954-5-chuanjia.liu@mediatek.com \
--to=chuanjia.liu@mediatek.com \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=frank-w@public-files.de \
--cc=jianjun.wang@mediatek.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
--cc=ryder.lee@mediatek.com \
--cc=yong.wu@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.