All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bard Liao <yung-chuan.liao@linux.intel.com>
To: alsa-devel@alsa-project.org, vkoul@kernel.org
Cc: vinod.koul@linaro.org, linux-kernel@vger.kernel.org,
	gregkh@linuxfoundation.org, srinivas.kandagatla@linaro.org,
	rander.wang@linux.intel.com, hui.wang@canonical.com,
	pierre-louis.bossart@linux.intel.com, sanyog.r.kale@intel.com,
	bard.liao@intel.com
Subject: [RESEND PATCH 03/11] soundwire: bus: use consistent tests for return values
Date: Fri, 26 Mar 2021 17:15:06 +0800	[thread overview]
Message-ID: <20210326091514.20751-4-yung-chuan.liao@linux.intel.com> (raw)
In-Reply-To: <20210326091514.20751-1-yung-chuan.liao@linux.intel.com>

From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

We use different styles to check the return values of IO related
routines. The majority of the cases use 'if (ret < 0)', align the
remaining cases for consistency.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
---
 drivers/soundwire/bus.c | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c
index 1c01cc192cbd..d39e5baa3e64 100644
--- a/drivers/soundwire/bus.c
+++ b/drivers/soundwire/bus.c
@@ -44,13 +44,13 @@ int sdw_bus_master_add(struct sdw_bus *bus, struct device *parent,
 	}
 
 	ret = sdw_get_id(bus);
-	if (ret) {
+	if (ret < 0) {
 		dev_err(parent, "Failed to get bus id\n");
 		return ret;
 	}
 
 	ret = sdw_master_device_add(bus, parent, fwnode);
-	if (ret) {
+	if (ret < 0) {
 		dev_err(parent, "Failed to add master device at link %d\n",
 			bus->link_id);
 		return ret;
@@ -121,7 +121,7 @@ int sdw_bus_master_add(struct sdw_bus *bus, struct device *parent,
 	else
 		ret = -ENOTSUPP; /* No ACPI/DT so error out */
 
-	if (ret) {
+	if (ret < 0) {
 		dev_err(bus->dev, "Finding slaves failed:%d\n", ret);
 		return ret;
 	}
@@ -422,7 +422,7 @@ sdw_bread_no_pm(struct sdw_bus *bus, u16 dev_num, u32 addr)
 
 	ret = sdw_fill_msg(&msg, NULL, addr, 1, dev_num,
 			   SDW_MSG_FLAG_READ, &buf);
-	if (ret)
+	if (ret < 0)
 		return ret;
 
 	ret = sdw_transfer(bus, &msg);
@@ -440,7 +440,7 @@ sdw_bwrite_no_pm(struct sdw_bus *bus, u16 dev_num, u32 addr, u8 value)
 
 	ret = sdw_fill_msg(&msg, NULL, addr, 1, dev_num,
 			   SDW_MSG_FLAG_WRITE, &value);
-	if (ret)
+	if (ret < 0)
 		return ret;
 
 	return sdw_transfer(bus, &msg);
@@ -454,7 +454,7 @@ int sdw_bread_no_pm_unlocked(struct sdw_bus *bus, u16 dev_num, u32 addr)
 
 	ret = sdw_fill_msg(&msg, NULL, addr, 1, dev_num,
 			   SDW_MSG_FLAG_READ, &buf);
-	if (ret)
+	if (ret < 0)
 		return ret;
 
 	ret = sdw_transfer_unlocked(bus, &msg);
@@ -472,7 +472,7 @@ int sdw_bwrite_no_pm_unlocked(struct sdw_bus *bus, u16 dev_num, u32 addr, u8 val
 
 	ret = sdw_fill_msg(&msg, NULL, addr, 1, dev_num,
 			   SDW_MSG_FLAG_WRITE, &value);
-	if (ret)
+	if (ret < 0)
 		return ret;
 
 	return sdw_transfer_unlocked(bus, &msg);
@@ -749,7 +749,7 @@ static int sdw_program_device_num(struct sdw_bus *bus)
 				 * dev_num
 				 */
 				ret = sdw_assign_device_num(slave);
-				if (ret) {
+				if (ret < 0) {
 					dev_err(bus->dev,
 						"Assign dev_num failed:%d\n",
 						ret);
@@ -886,7 +886,7 @@ static int sdw_slave_clk_stop_prepare(struct sdw_slave *slave,
 
 	ret = sdw_write_no_pm(slave, SDW_SCP_SYSTEMCTRL, val);
 
-	if (ret != 0)
+	if (ret < 0)
 		dev_err(&slave->dev,
 			"Clock Stop prepare failed for slave: %d", ret);
 
@@ -1748,7 +1748,7 @@ int sdw_handle_slave_status(struct sdw_bus *bus,
 	if (status[0] == SDW_SLAVE_ATTACHED) {
 		dev_dbg(bus->dev, "Slave attached, programming device number\n");
 		ret = sdw_program_device_num(bus);
-		if (ret)
+		if (ret < 0)
 			dev_err(bus->dev, "Slave attach failed: %d\n", ret);
 		/*
 		 * programming a device number will have side effects,
@@ -1782,7 +1782,7 @@ int sdw_handle_slave_status(struct sdw_bus *bus,
 
 		case SDW_SLAVE_ALERT:
 			ret = sdw_handle_slave_alerts(slave);
-			if (ret)
+			if (ret < 0)
 				dev_err(&slave->dev,
 					"Slave %d alert handling failed: %d\n",
 					i, ret);
@@ -1801,7 +1801,7 @@ int sdw_handle_slave_status(struct sdw_bus *bus,
 			attached_initializing = true;
 
 			ret = sdw_initialize_slave(slave);
-			if (ret)
+			if (ret < 0)
 				dev_err(&slave->dev,
 					"Slave %d initialization failed: %d\n",
 					i, ret);
@@ -1815,7 +1815,7 @@ int sdw_handle_slave_status(struct sdw_bus *bus,
 		}
 
 		ret = sdw_update_slave_status(slave, status[i]);
-		if (ret)
+		if (ret < 0)
 			dev_err(&slave->dev,
 				"Update Slave status failed:%d\n", ret);
 		if (attached_initializing) {
-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: Bard Liao <yung-chuan.liao@linux.intel.com>
To: alsa-devel@alsa-project.org, vkoul@kernel.org
Cc: vinod.koul@linaro.org, gregkh@linuxfoundation.org,
	linux-kernel@vger.kernel.org,
	pierre-louis.bossart@linux.intel.com, hui.wang@canonical.com,
	srinivas.kandagatla@linaro.org, sanyog.r.kale@intel.com,
	rander.wang@linux.intel.com, bard.liao@intel.com
Subject: [RESEND PATCH 03/11] soundwire: bus: use consistent tests for return values
Date: Fri, 26 Mar 2021 17:15:06 +0800	[thread overview]
Message-ID: <20210326091514.20751-4-yung-chuan.liao@linux.intel.com> (raw)
In-Reply-To: <20210326091514.20751-1-yung-chuan.liao@linux.intel.com>

From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

We use different styles to check the return values of IO related
routines. The majority of the cases use 'if (ret < 0)', align the
remaining cases for consistency.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
---
 drivers/soundwire/bus.c | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c
index 1c01cc192cbd..d39e5baa3e64 100644
--- a/drivers/soundwire/bus.c
+++ b/drivers/soundwire/bus.c
@@ -44,13 +44,13 @@ int sdw_bus_master_add(struct sdw_bus *bus, struct device *parent,
 	}
 
 	ret = sdw_get_id(bus);
-	if (ret) {
+	if (ret < 0) {
 		dev_err(parent, "Failed to get bus id\n");
 		return ret;
 	}
 
 	ret = sdw_master_device_add(bus, parent, fwnode);
-	if (ret) {
+	if (ret < 0) {
 		dev_err(parent, "Failed to add master device at link %d\n",
 			bus->link_id);
 		return ret;
@@ -121,7 +121,7 @@ int sdw_bus_master_add(struct sdw_bus *bus, struct device *parent,
 	else
 		ret = -ENOTSUPP; /* No ACPI/DT so error out */
 
-	if (ret) {
+	if (ret < 0) {
 		dev_err(bus->dev, "Finding slaves failed:%d\n", ret);
 		return ret;
 	}
@@ -422,7 +422,7 @@ sdw_bread_no_pm(struct sdw_bus *bus, u16 dev_num, u32 addr)
 
 	ret = sdw_fill_msg(&msg, NULL, addr, 1, dev_num,
 			   SDW_MSG_FLAG_READ, &buf);
-	if (ret)
+	if (ret < 0)
 		return ret;
 
 	ret = sdw_transfer(bus, &msg);
@@ -440,7 +440,7 @@ sdw_bwrite_no_pm(struct sdw_bus *bus, u16 dev_num, u32 addr, u8 value)
 
 	ret = sdw_fill_msg(&msg, NULL, addr, 1, dev_num,
 			   SDW_MSG_FLAG_WRITE, &value);
-	if (ret)
+	if (ret < 0)
 		return ret;
 
 	return sdw_transfer(bus, &msg);
@@ -454,7 +454,7 @@ int sdw_bread_no_pm_unlocked(struct sdw_bus *bus, u16 dev_num, u32 addr)
 
 	ret = sdw_fill_msg(&msg, NULL, addr, 1, dev_num,
 			   SDW_MSG_FLAG_READ, &buf);
-	if (ret)
+	if (ret < 0)
 		return ret;
 
 	ret = sdw_transfer_unlocked(bus, &msg);
@@ -472,7 +472,7 @@ int sdw_bwrite_no_pm_unlocked(struct sdw_bus *bus, u16 dev_num, u32 addr, u8 val
 
 	ret = sdw_fill_msg(&msg, NULL, addr, 1, dev_num,
 			   SDW_MSG_FLAG_WRITE, &value);
-	if (ret)
+	if (ret < 0)
 		return ret;
 
 	return sdw_transfer_unlocked(bus, &msg);
@@ -749,7 +749,7 @@ static int sdw_program_device_num(struct sdw_bus *bus)
 				 * dev_num
 				 */
 				ret = sdw_assign_device_num(slave);
-				if (ret) {
+				if (ret < 0) {
 					dev_err(bus->dev,
 						"Assign dev_num failed:%d\n",
 						ret);
@@ -886,7 +886,7 @@ static int sdw_slave_clk_stop_prepare(struct sdw_slave *slave,
 
 	ret = sdw_write_no_pm(slave, SDW_SCP_SYSTEMCTRL, val);
 
-	if (ret != 0)
+	if (ret < 0)
 		dev_err(&slave->dev,
 			"Clock Stop prepare failed for slave: %d", ret);
 
@@ -1748,7 +1748,7 @@ int sdw_handle_slave_status(struct sdw_bus *bus,
 	if (status[0] == SDW_SLAVE_ATTACHED) {
 		dev_dbg(bus->dev, "Slave attached, programming device number\n");
 		ret = sdw_program_device_num(bus);
-		if (ret)
+		if (ret < 0)
 			dev_err(bus->dev, "Slave attach failed: %d\n", ret);
 		/*
 		 * programming a device number will have side effects,
@@ -1782,7 +1782,7 @@ int sdw_handle_slave_status(struct sdw_bus *bus,
 
 		case SDW_SLAVE_ALERT:
 			ret = sdw_handle_slave_alerts(slave);
-			if (ret)
+			if (ret < 0)
 				dev_err(&slave->dev,
 					"Slave %d alert handling failed: %d\n",
 					i, ret);
@@ -1801,7 +1801,7 @@ int sdw_handle_slave_status(struct sdw_bus *bus,
 			attached_initializing = true;
 
 			ret = sdw_initialize_slave(slave);
-			if (ret)
+			if (ret < 0)
 				dev_err(&slave->dev,
 					"Slave %d initialization failed: %d\n",
 					i, ret);
@@ -1815,7 +1815,7 @@ int sdw_handle_slave_status(struct sdw_bus *bus,
 		}
 
 		ret = sdw_update_slave_status(slave, status[i]);
-		if (ret)
+		if (ret < 0)
 			dev_err(&slave->dev,
 				"Update Slave status failed:%d\n", ret);
 		if (attached_initializing) {
-- 
2.17.1


  parent reply	other threads:[~2021-03-26  9:16 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-26  9:15 [RESEND PATCH 00/11] soundwire: some cleanup patches Bard Liao
2021-03-26  9:15 ` Bard Liao
2021-03-26  9:15 ` [RESEND PATCH 01/11] soundwire: bus: use correct driver name in error messages Bard Liao
2021-03-26  9:15   ` Bard Liao
2021-03-26  9:15 ` [RESEND PATCH 02/11] soundwire: bus: test read status Bard Liao
2021-03-26  9:15   ` Bard Liao
2021-03-26  9:15 ` Bard Liao [this message]
2021-03-26  9:15   ` [RESEND PATCH 03/11] soundwire: bus: use consistent tests for return values Bard Liao
2021-03-26  9:15 ` [RESEND PATCH 04/11] soundwire: bus: demote clock stop prepare log to dev_dbg() Bard Liao
2021-03-26  9:15   ` Bard Liao
2021-03-26  9:15 ` [RESEND PATCH 05/11] soundwire: bus: uniquify dev_err() for SCP_INT access Bard Liao
2021-03-26  9:15   ` Bard Liao
2021-03-26  9:15 ` [RESEND PATCH 06/11] soundwire: bus: remove useless initialization Bard Liao
2021-03-26  9:15   ` Bard Liao
2021-03-26  9:15 ` [RESEND PATCH 07/11] soundwire: generic_bandwidth_allocation: remove useless init Bard Liao
2021-03-26  9:15   ` Bard Liao
2021-03-26  9:15 ` [RESEND PATCH 08/11] soundwire: intel: remove useless readl Bard Liao
2021-03-26  9:15   ` Bard Liao
2021-03-26  9:15 ` [RESEND PATCH 09/11] soundwire: qcom: check of_property_read status Bard Liao
2021-03-26  9:15   ` Bard Liao
2021-03-26  9:15 ` [RESEND PATCH 10/11] soundwire: stream: remove useless initialization Bard Liao
2021-03-26  9:15   ` Bard Liao
2021-03-26  9:15 ` [RESEND PATCH 11/11] soundwire: stream: remove useless bus initializations Bard Liao
2021-03-26  9:15   ` Bard Liao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210326091514.20751-4-yung-chuan.liao@linux.intel.com \
    --to=yung-chuan.liao@linux.intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=bard.liao@intel.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=hui.wang@canonical.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pierre-louis.bossart@linux.intel.com \
    --cc=rander.wang@linux.intel.com \
    --cc=sanyog.r.kale@intel.com \
    --cc=srinivas.kandagatla@linaro.org \
    --cc=vinod.koul@linaro.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.