From: Stefan Riedmueller <s.riedmueller@phytec.de> To: Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de>, Fabio Estevam <festevam@gmail.com>, NXP Linux Team <linux-imx@nxp.com>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Stefan Riedmueller <s.riedmueller@phytec.de> Subject: [PATCH 2/3] ARM: dts: imx6: pbab01: Set USB OTG port to peripheral Date: Mon, 29 Mar 2021 13:28:18 +0200 [thread overview] Message-ID: <20210329112819.64043-2-s.riedmueller@phytec.de> (raw) In-Reply-To: <20210329112819.64043-1-s.riedmueller@phytec.de> Due to a hardware bug preventing the correct detection if the ID pin the USB OTG port cannot be used in otg mode. It can either be set to host or peripheral. Set it to peripheral so vbus is disabled by default. Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> --- arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi index d434868e870a..b2f78b4362cb 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi @@ -164,6 +164,7 @@ &usbh1 { &usbotg { status = "okay"; + dr_mode = "peripheral"; }; &usdhc2 { -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Stefan Riedmueller <s.riedmueller@phytec.de> To: Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de>, Fabio Estevam <festevam@gmail.com>, NXP Linux Team <linux-imx@nxp.com>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Stefan Riedmueller <s.riedmueller@phytec.de> Subject: [PATCH 2/3] ARM: dts: imx6: pbab01: Set USB OTG port to peripheral Date: Mon, 29 Mar 2021 13:28:18 +0200 [thread overview] Message-ID: <20210329112819.64043-2-s.riedmueller@phytec.de> (raw) In-Reply-To: <20210329112819.64043-1-s.riedmueller@phytec.de> Due to a hardware bug preventing the correct detection if the ID pin the USB OTG port cannot be used in otg mode. It can either be set to host or peripheral. Set it to peripheral so vbus is disabled by default. Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> --- arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi index d434868e870a..b2f78b4362cb 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi @@ -164,6 +164,7 @@ &usbh1 { &usbotg { status = "okay"; + dr_mode = "peripheral"; }; &usdhc2 { -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-03-29 11:29 UTC|newest] Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-03-29 11:28 [PATCH 1/3] ARM: dts: imx6: pfla02: Fix USB vbus enable pinmuxing Stefan Riedmueller 2021-03-29 11:28 ` Stefan Riedmueller 2021-03-29 11:28 ` Stefan Riedmueller [this message] 2021-03-29 11:28 ` [PATCH 2/3] ARM: dts: imx6: pbab01: Set USB OTG port to peripheral Stefan Riedmueller 2021-03-29 11:33 ` Fabio Estevam 2021-03-29 11:33 ` Fabio Estevam 2021-03-29 11:28 ` [PATCH 3/3] ARM: dts: imx6: pbab01: Set vmmc supply for both SD interfaces Stefan Riedmueller 2021-03-29 11:28 ` Stefan Riedmueller 2021-03-29 11:34 ` Fabio Estevam 2021-03-29 11:34 ` Fabio Estevam 2021-03-29 12:41 ` Stefan Riedmüller 2021-03-29 12:41 ` Stefan Riedmüller 2021-03-29 11:32 ` [PATCH 1/3] ARM: dts: imx6: pfla02: Fix USB vbus enable pinmuxing Fabio Estevam 2021-03-29 11:32 ` Fabio Estevam 2021-03-29 12:39 ` Stefan Riedmüller 2021-03-29 12:39 ` Stefan Riedmüller
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210329112819.64043-2-s.riedmueller@phytec.de \ --to=s.riedmueller@phytec.de \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=kernel@pengutronix.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=robh+dt@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.