From: Enric Balletbo i Serra <enric.balletbo@collabora.com>
To: linux-kernel@vger.kernel.org
Cc: "Collabora Kernel ML" <kernel@collabora.com>,
linux-mediatek@lists.infradead.org, matthias.bgg@gmail.com,
drinkcat@chromium.org, hsinyi@chromium.org,
"Arnd Bergmann" <arnd@arndb.de>,
"Bjorn Andersson" <bjorn.andersson@linaro.org>,
"Catalin Marinas" <catalin.marinas@arm.com>,
"Dmitry Baryshkov" <dmitry.baryshkov@linaro.org>,
"Geert Uytterhoeven" <geert+renesas@glider.be>,
"Guido Günther" <agx@sigxcpu.org>,
"Jagan Teki" <jagan@amarulasolutions.com>,
"Krzysztof Kozlowski" <krzk@kernel.org>,
"Lad Prabhakar" <prabhakar.mahadev-lad.rj@bp.renesas.com>,
"Max Krummenacher" <max.oss.09@gmail.com>,
"Michael Walle" <michael@walle.cc>, "Nishanth Menon" <nm@ti.com>,
"Shawn Guo" <shawnguo@kernel.org>,
"Will Deacon" <will@kernel.org>,
linux-arm-kernel@lists.infradead.org
Subject: [RESEND PATCH 1/2] arm64: defconfig: Allow mt8173-based boards to boot from usb
Date: Wed, 31 Mar 2021 11:06:57 +0200 [thread overview]
Message-ID: <20210331090659.4169966-1-enric.balletbo@collabora.com> (raw)
Enable the option necessary to boot mt8173-based boards to boot from
usb devices, like its phy and the regulators needed to have proper
support.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---
This is only a resend rebased on top of mainline to fix some trivial
conflicts.
arch/arm64/configs/defconfig | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index d612f633b771..7b4be3807b6d 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -448,6 +448,7 @@ CONFIG_I2C_GPIO=m
CONFIG_I2C_IMX=y
CONFIG_I2C_IMX_LPI2C=y
CONFIG_I2C_MESON=y
+CONFIG_I2C_MT65XX=y
CONFIG_I2C_MV64XXX=y
CONFIG_I2C_OMAP=y
CONFIG_I2C_OWL=y
@@ -594,6 +595,7 @@ CONFIG_MFD_EXYNOS_LPASS=m
CONFIG_MFD_HI6421_PMIC=y
CONFIG_MFD_HI655X_PMIC=y
CONFIG_MFD_MAX77620=y
+CONFIG_MFD_MT6397=y
CONFIG_MFD_SPMI_PMIC=y
CONFIG_MFD_RK808=y
CONFIG_MFD_SEC_CORE=y
@@ -611,6 +613,8 @@ CONFIG_REGULATOR_HI655X=y
CONFIG_REGULATOR_MAX77620=y
CONFIG_REGULATOR_MAX8973=y
CONFIG_REGULATOR_MP8859=y
+CONFIG_REGULATOR_MT6358=y
+CONFIG_REGULATOR_MT6397=y
CONFIG_REGULATOR_PCA9450=y
CONFIG_REGULATOR_PF8X00=y
CONFIG_REGULATOR_PFUZE100=y
@@ -787,6 +791,7 @@ CONFIG_USB_RENESAS_USBHS_HCD=m
CONFIG_USB_RENESAS_USBHS=m
CONFIG_USB_ACM=m
CONFIG_USB_STORAGE=y
+CONFIG_USB_MTU3=y
CONFIG_USB_MUSB_HDRC=y
CONFIG_USB_MUSB_SUNXI=y
CONFIG_USB_DWC3=y
@@ -988,6 +993,7 @@ CONFIG_OWL_PM_DOMAINS=y
CONFIG_RASPBERRYPI_POWER=y
CONFIG_FSL_DPAA=y
CONFIG_FSL_MC_DPIO=y
+CONFIG_MTK_PMIC_WRAP=y
CONFIG_QCOM_AOSS_QMP=y
CONFIG_QCOM_COMMAND_DB=y
CONFIG_QCOM_GENI_SE=y
@@ -1064,6 +1070,7 @@ CONFIG_PHY_HI6220_USB=y
CONFIG_PHY_HISTB_COMBPHY=y
CONFIG_PHY_HISI_INNO_USB2=y
CONFIG_PHY_MVEBU_CP110_COMPHY=y
+CONFIG_PHY_MTK_TPHY=y
CONFIG_PHY_QCOM_QMP=m
CONFIG_PHY_QCOM_QUSB2=m
CONFIG_PHY_QCOM_USB_HS=y
--
2.30.2
WARNING: multiple messages have this Message-ID (diff)
From: Enric Balletbo i Serra <enric.balletbo@collabora.com>
To: linux-kernel@vger.kernel.org
Cc: "Collabora Kernel ML" <kernel@collabora.com>,
linux-mediatek@lists.infradead.org, matthias.bgg@gmail.com,
drinkcat@chromium.org, hsinyi@chromium.org,
"Arnd Bergmann" <arnd@arndb.de>,
"Bjorn Andersson" <bjorn.andersson@linaro.org>,
"Catalin Marinas" <catalin.marinas@arm.com>,
"Dmitry Baryshkov" <dmitry.baryshkov@linaro.org>,
"Geert Uytterhoeven" <geert+renesas@glider.be>,
"Guido Günther" <agx@sigxcpu.org>,
"Jagan Teki" <jagan@amarulasolutions.com>,
"Krzysztof Kozlowski" <krzk@kernel.org>,
"Lad Prabhakar" <prabhakar.mahadev-lad.rj@bp.renesas.com>,
"Max Krummenacher" <max.oss.09@gmail.com>,
"Michael Walle" <michael@walle.cc>, "Nishanth Menon" <nm@ti.com>,
"Shawn Guo" <shawnguo@kernel.org>,
"Will Deacon" <will@kernel.org>,
linux-arm-kernel@lists.infradead.org
Subject: [RESEND PATCH 1/2] arm64: defconfig: Allow mt8173-based boards to boot from usb
Date: Wed, 31 Mar 2021 11:06:57 +0200 [thread overview]
Message-ID: <20210331090659.4169966-1-enric.balletbo@collabora.com> (raw)
Enable the option necessary to boot mt8173-based boards to boot from
usb devices, like its phy and the regulators needed to have proper
support.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---
This is only a resend rebased on top of mainline to fix some trivial
conflicts.
arch/arm64/configs/defconfig | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index d612f633b771..7b4be3807b6d 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -448,6 +448,7 @@ CONFIG_I2C_GPIO=m
CONFIG_I2C_IMX=y
CONFIG_I2C_IMX_LPI2C=y
CONFIG_I2C_MESON=y
+CONFIG_I2C_MT65XX=y
CONFIG_I2C_MV64XXX=y
CONFIG_I2C_OMAP=y
CONFIG_I2C_OWL=y
@@ -594,6 +595,7 @@ CONFIG_MFD_EXYNOS_LPASS=m
CONFIG_MFD_HI6421_PMIC=y
CONFIG_MFD_HI655X_PMIC=y
CONFIG_MFD_MAX77620=y
+CONFIG_MFD_MT6397=y
CONFIG_MFD_SPMI_PMIC=y
CONFIG_MFD_RK808=y
CONFIG_MFD_SEC_CORE=y
@@ -611,6 +613,8 @@ CONFIG_REGULATOR_HI655X=y
CONFIG_REGULATOR_MAX77620=y
CONFIG_REGULATOR_MAX8973=y
CONFIG_REGULATOR_MP8859=y
+CONFIG_REGULATOR_MT6358=y
+CONFIG_REGULATOR_MT6397=y
CONFIG_REGULATOR_PCA9450=y
CONFIG_REGULATOR_PF8X00=y
CONFIG_REGULATOR_PFUZE100=y
@@ -787,6 +791,7 @@ CONFIG_USB_RENESAS_USBHS_HCD=m
CONFIG_USB_RENESAS_USBHS=m
CONFIG_USB_ACM=m
CONFIG_USB_STORAGE=y
+CONFIG_USB_MTU3=y
CONFIG_USB_MUSB_HDRC=y
CONFIG_USB_MUSB_SUNXI=y
CONFIG_USB_DWC3=y
@@ -988,6 +993,7 @@ CONFIG_OWL_PM_DOMAINS=y
CONFIG_RASPBERRYPI_POWER=y
CONFIG_FSL_DPAA=y
CONFIG_FSL_MC_DPIO=y
+CONFIG_MTK_PMIC_WRAP=y
CONFIG_QCOM_AOSS_QMP=y
CONFIG_QCOM_COMMAND_DB=y
CONFIG_QCOM_GENI_SE=y
@@ -1064,6 +1070,7 @@ CONFIG_PHY_HI6220_USB=y
CONFIG_PHY_HISTB_COMBPHY=y
CONFIG_PHY_HISI_INNO_USB2=y
CONFIG_PHY_MVEBU_CP110_COMPHY=y
+CONFIG_PHY_MTK_TPHY=y
CONFIG_PHY_QCOM_QMP=m
CONFIG_PHY_QCOM_QUSB2=m
CONFIG_PHY_QCOM_USB_HS=y
--
2.30.2
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
WARNING: multiple messages have this Message-ID (diff)
From: Enric Balletbo i Serra <enric.balletbo@collabora.com>
To: linux-kernel@vger.kernel.org
Cc: "Collabora Kernel ML" <kernel@collabora.com>,
linux-mediatek@lists.infradead.org, matthias.bgg@gmail.com,
drinkcat@chromium.org, hsinyi@chromium.org,
"Arnd Bergmann" <arnd@arndb.de>,
"Bjorn Andersson" <bjorn.andersson@linaro.org>,
"Catalin Marinas" <catalin.marinas@arm.com>,
"Dmitry Baryshkov" <dmitry.baryshkov@linaro.org>,
"Geert Uytterhoeven" <geert+renesas@glider.be>,
"Guido Günther" <agx@sigxcpu.org>,
"Jagan Teki" <jagan@amarulasolutions.com>,
"Krzysztof Kozlowski" <krzk@kernel.org>,
"Lad Prabhakar" <prabhakar.mahadev-lad.rj@bp.renesas.com>,
"Max Krummenacher" <max.oss.09@gmail.com>,
"Michael Walle" <michael@walle.cc>, "Nishanth Menon" <nm@ti.com>,
"Shawn Guo" <shawnguo@kernel.org>,
"Will Deacon" <will@kernel.org>,
linux-arm-kernel@lists.infradead.org
Subject: [RESEND PATCH 1/2] arm64: defconfig: Allow mt8173-based boards to boot from usb
Date: Wed, 31 Mar 2021 11:06:57 +0200 [thread overview]
Message-ID: <20210331090659.4169966-1-enric.balletbo@collabora.com> (raw)
Enable the option necessary to boot mt8173-based boards to boot from
usb devices, like its phy and the regulators needed to have proper
support.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---
This is only a resend rebased on top of mainline to fix some trivial
conflicts.
arch/arm64/configs/defconfig | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index d612f633b771..7b4be3807b6d 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -448,6 +448,7 @@ CONFIG_I2C_GPIO=m
CONFIG_I2C_IMX=y
CONFIG_I2C_IMX_LPI2C=y
CONFIG_I2C_MESON=y
+CONFIG_I2C_MT65XX=y
CONFIG_I2C_MV64XXX=y
CONFIG_I2C_OMAP=y
CONFIG_I2C_OWL=y
@@ -594,6 +595,7 @@ CONFIG_MFD_EXYNOS_LPASS=m
CONFIG_MFD_HI6421_PMIC=y
CONFIG_MFD_HI655X_PMIC=y
CONFIG_MFD_MAX77620=y
+CONFIG_MFD_MT6397=y
CONFIG_MFD_SPMI_PMIC=y
CONFIG_MFD_RK808=y
CONFIG_MFD_SEC_CORE=y
@@ -611,6 +613,8 @@ CONFIG_REGULATOR_HI655X=y
CONFIG_REGULATOR_MAX77620=y
CONFIG_REGULATOR_MAX8973=y
CONFIG_REGULATOR_MP8859=y
+CONFIG_REGULATOR_MT6358=y
+CONFIG_REGULATOR_MT6397=y
CONFIG_REGULATOR_PCA9450=y
CONFIG_REGULATOR_PF8X00=y
CONFIG_REGULATOR_PFUZE100=y
@@ -787,6 +791,7 @@ CONFIG_USB_RENESAS_USBHS_HCD=m
CONFIG_USB_RENESAS_USBHS=m
CONFIG_USB_ACM=m
CONFIG_USB_STORAGE=y
+CONFIG_USB_MTU3=y
CONFIG_USB_MUSB_HDRC=y
CONFIG_USB_MUSB_SUNXI=y
CONFIG_USB_DWC3=y
@@ -988,6 +993,7 @@ CONFIG_OWL_PM_DOMAINS=y
CONFIG_RASPBERRYPI_POWER=y
CONFIG_FSL_DPAA=y
CONFIG_FSL_MC_DPIO=y
+CONFIG_MTK_PMIC_WRAP=y
CONFIG_QCOM_AOSS_QMP=y
CONFIG_QCOM_COMMAND_DB=y
CONFIG_QCOM_GENI_SE=y
@@ -1064,6 +1070,7 @@ CONFIG_PHY_HI6220_USB=y
CONFIG_PHY_HISTB_COMBPHY=y
CONFIG_PHY_HISI_INNO_USB2=y
CONFIG_PHY_MVEBU_CP110_COMPHY=y
+CONFIG_PHY_MTK_TPHY=y
CONFIG_PHY_QCOM_QMP=m
CONFIG_PHY_QCOM_QUSB2=m
CONFIG_PHY_QCOM_USB_HS=y
--
2.30.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-03-31 9:07 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-31 9:06 Enric Balletbo i Serra [this message]
2021-03-31 9:06 ` [RESEND PATCH 1/2] arm64: defconfig: Allow mt8173-based boards to boot from usb Enric Balletbo i Serra
2021-03-31 9:06 ` Enric Balletbo i Serra
2021-03-31 9:06 ` [RESEND PATCH 2/2] arm64: defconfig: Enable options to support panel display for Mediatek Chromebooks Enric Balletbo i Serra
2021-03-31 9:06 ` Enric Balletbo i Serra
2021-03-31 9:06 ` Enric Balletbo i Serra
2021-03-31 9:15 ` Hsin-Yi Wang
2021-03-31 9:15 ` Hsin-Yi Wang
2021-03-31 9:15 ` Hsin-Yi Wang
2021-03-31 9:15 ` [RESEND PATCH 1/2] arm64: defconfig: Allow mt8173-based boards to boot from usb Hsin-Yi Wang
2021-03-31 9:15 ` Hsin-Yi Wang
2021-03-31 9:15 ` Hsin-Yi Wang
2021-03-31 10:13 ` Matthias Brugger
2021-03-31 10:13 ` Matthias Brugger
2021-03-31 10:13 ` Matthias Brugger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210331090659.4169966-1-enric.balletbo@collabora.com \
--to=enric.balletbo@collabora.com \
--cc=agx@sigxcpu.org \
--cc=arnd@arndb.de \
--cc=bjorn.andersson@linaro.org \
--cc=catalin.marinas@arm.com \
--cc=dmitry.baryshkov@linaro.org \
--cc=drinkcat@chromium.org \
--cc=geert+renesas@glider.be \
--cc=hsinyi@chromium.org \
--cc=jagan@amarulasolutions.com \
--cc=kernel@collabora.com \
--cc=krzk@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=max.oss.09@gmail.com \
--cc=michael@walle.cc \
--cc=nm@ti.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=shawnguo@kernel.org \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.