[PATCH 4/4] arm64: dts: mt8183: Add kukui kodama board

[Hsin-Yi Wang <hsinyi@chromium.org>]

kodama is also known as Lenovo 10e Chromebook Tablet.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
---
There are 4 skus in kodama:
- OV5695 camera + AUO panel
- GC5035 camera + AUO panel
- OV5695 camera + BOE panel
- GC5035 camera + BOE panel

The camera node are not yet ready to sent, so there's only panel in this
patch.
---
 arch/arm64/boot/dts/mediatek/Makefile         |   4 +
 .../mediatek/mt8183-kukui-kodama-sku16.dts    |  21 ++
 .../mediatek/mt8183-kukui-kodama-sku272.dts   |  21 ++
 .../mediatek/mt8183-kukui-kodama-sku288.dts   |  21 ++
 .../mediatek/mt8183-kukui-kodama-sku32.dts    |  21 ++
 .../dts/mediatek/mt8183-kukui-kodama.dtsi     | 343 ++++++++++++++++++
 6 files changed, 431 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku16.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku272.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku288.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku32.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi

diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index fb891492ad66..291087dccaa8 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -16,6 +16,10 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-damu.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-juniper-sku16.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kakadu.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku16.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku272.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku288.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku32.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku16.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku16.dts
new file mode 100644
index 000000000000..e3dd75bdaea4
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku16.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ *
+ * SKU: 0x10 => 16
+ *  - bit 8: Camera: 0 (OV5695)
+ *  - bits 7..4: Panel ID: 0x1 (AUO)
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-kodama.dtsi"
+
+/ {
+	model = "MediaTek kodama sku16 board";
+	compatible = "google,kodama-sku16", "google,kodama", "mediatek,mt8183";
+};
+
+&panel {
+	status = "okay";
+	compatible = "auo,b101uan08.3";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku272.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku272.dts
new file mode 100644
index 000000000000..d81935ae07bc
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku272.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2020 Google LLC
+ *
+ * SKU: 0x110 => 272
+ *  - bit 8: Camera: 1 (GC5035)
+ *  - bits 7..4: Panel ID: 0x1 (AUO)
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-kodama.dtsi"
+
+/ {
+	model = "MediaTek kodama sku272 board";
+	compatible = "google,kodama-sku272", "google,kodama", "mediatek,mt8183";
+};
+
+&panel {
+	status = "okay";
+	compatible = "auo,b101uan08.3";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku288.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku288.dts
new file mode 100644
index 000000000000..f4082fbe0517
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku288.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2020 Google LLC
+ *
+ * SKU: 0x120 => 288
+ *  - bit 8: Camera: 1 (GC5035)
+ *  - bits 7..4: Panel ID: 0x2 (BOE)
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-kodama.dtsi"
+
+/ {
+	model = "MediaTek kodama sku288 board";
+	compatible = "google,kodama-sku288", "google,kodama", "mediatek,mt8183";
+};
+
+&panel {
+	status = "okay";
+	compatible = "boe,tv101wum-n53";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku32.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku32.dts
new file mode 100644
index 000000000000..7739358008ee
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku32.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ *
+ * SKU: 0x20 => 32
+ *  - bit 8: Camera: 0 (OV5695)
+ *  - bits 7..4: Panel ID: 0x2 (BOE)
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-kodama.dtsi"
+
+/ {
+	model = "MediaTek kodama sku32 board";
+	compatible = "google,kodama-sku32", "google,kodama", "mediatek,mt8183";
+};
+
+&panel {
+	status = "okay";
+	compatible = "boe,tv101wum-n53";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
new file mode 100644
index 000000000000..2f5234a16ead
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
@@ -0,0 +1,343 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2021 Google LLC
+ */
+
+/dts-v1/;
+#include "mt8183-kukui.dtsi"
+
+/ {
+	ppvarn_lcd: ppvarn-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvarn_lcd";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ppvarn_lcd_en>;
+
+		enable-active-high;
+
+		gpio = <&pio 66 GPIO_ACTIVE_HIGH>;
+	};
+
+	ppvarp_lcd: ppvarp-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvarp_lcd";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ppvarp_lcd_en>;
+
+		enable-active-high;
+
+		gpio = <&pio 166 GPIO_ACTIVE_HIGH>;
+	};
+
+	pp1800_lcd: pp1800-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_lcd";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp1800_lcd_en>;
+
+		enable-active-high;
+
+		gpio = <&pio 36 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	touchscreen: touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+		interrupt-parent = <&pio>;
+		interrupts = <155 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_default>;
+
+		post-power-on-delay-ms = <10>;
+		hid-descr-addr = <0x0001>;
+	};
+};
+
+&i2c2 {
+        pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	status = "okay";
+	clock-frequency = <400000>;
+
+	eeprom@58 {
+		compatible = "atmel,24c64";
+		reg = <0x58>;
+		pagesize = <32>;
+	};
+};
+
+&i2c4 {
+        pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+	status = "okay";
+	clock-frequency = <400000>;
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+		pagesize = <32>;
+	};
+};
+
+&mt6358_vcama2_reg {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
+&pio {
+	/* 192 lines */
+	gpio-line-names =
+		"SPI_AP_EC_CS_L",
+		"SPI_AP_EC_MOSI",
+		"SPI_AP_EC_CLK",
+		"I2S3_DO",
+		"USB_PD_INT_ODL",
+		"",
+		"",
+		"",
+		"",
+		"IT6505_HPD_L",
+		"I2S3_TDM_D3",
+		"SOC_I2C6_1V8_SCL",
+		"SOC_I2C6_1V8_SDA",
+		"DPI_D0",
+		"DPI_D1",
+		"DPI_D2",
+		"DPI_D3",
+		"DPI_D4",
+		"DPI_D5",
+		"DPI_D6",
+		"DPI_D7",
+		"DPI_D8",
+		"DPI_D9",
+		"DPI_D10",
+		"DPI_D11",
+		"DPI_HSYNC",
+		"DPI_VSYNC",
+		"DPI_DE",
+		"DPI_CK",
+		"AP_MSDC1_CLK",
+		"AP_MSDC1_DAT3",
+		"AP_MSDC1_CMD",
+		"AP_MSDC1_DAT0",
+		"AP_MSDC1_DAT2",
+		"AP_MSDC1_DAT1",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"OTG_EN",
+		"DRVBUS",
+		"DISP_PWM",
+		"DSI_TE",
+		"LCM_RST_1V8",
+		"AP_CTS_WIFI_RTS",
+		"AP_RTS_WIFI_CTS",
+		"SOC_I2C5_1V8_SCL",
+		"SOC_I2C5_1V8_SDA",
+		"SOC_I2C3_1V8_SCL",
+		"SOC_I2C3_1V8_SDA",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"SOC_I2C1_1V8_SDA",
+		"SOC_I2C0_1V8_SDA",
+		"SOC_I2C0_1V8_SCL",
+		"SOC_I2C1_1V8_SCL",
+		"AP_SPI_H1_MISO",
+		"AP_SPI_H1_CS_L",
+		"AP_SPI_H1_MOSI",
+		"AP_SPI_H1_CLK",
+		"I2S5_BCK",
+		"I2S5_LRCK",
+		"I2S5_DO",
+		"BOOTBLOCK_EN_L",
+		"MT8183_KPCOL0",
+		"SPI_AP_EC_MISO",
+		"UART_DBG_TX_AP_RX",
+		"UART_AP_TX_DBG_RX",
+		"I2S2_MCK",
+		"I2S2_BCK",
+		"CLK_5M_WCAM",
+		"CLK_2M_UCAM",
+		"I2S2_LRCK",
+		"I2S2_DI",
+		"SOC_I2C2_1V8_SCL",
+		"SOC_I2C2_1V8_SDA",
+		"SOC_I2C4_1V8_SCL",
+		"SOC_I2C4_1V8_SDA",
+		"",
+		"SCL8",
+		"SDA8",
+		"FCAM_PWDN_L",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		/*
+		 * AP_FLASH_WP_L is crossystem ABI. Rev1 schematics
+		 * call it BIOS_FLASH_WP_R_L.
+		 */
+		"AP_FLASH_WP_L",
+		"EC_AP_INT_ODL",
+		"IT6505_INT_ODL",
+		"H1_INT_OD_L",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"AP_SPI_FLASH_MISO",
+		"AP_SPI_FLASH_CS_L",
+		"AP_SPI_FLASH_MOSI",
+		"AP_SPI_FLASH_CLK",
+		"DA7219_IRQ",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"";
+
+	ppvarp_lcd_en: ppvarp-lcd-en {
+		pins1 {
+			pinmux = <PINMUX_GPIO66__FUNC_GPIO66>;
+			output-low;
+		};
+	};
+
+	ppvarn_lcd_en: ppvarn-lcd-en {
+		pins1 {
+			pinmux = <PINMUX_GPIO166__FUNC_GPIO166>;
+			output-low;
+		};
+	};
+
+	pp1800_lcd_en: pp1800-lcd-en {
+		pins1 {
+			pinmux = <PINMUX_GPIO36__FUNC_GPIO36>;
+			output-low;
+		};
+	};
+
+	touch_default: touchdefault {
+		pin_irq {
+			pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		touch_pin_reset: pin_reset {
+			pinmux = <PINMUX_GPIO156__FUNC_GPIO156>;
+
+			/*
+			 * The touchscreen driver doesn't currently support driving
+			 * this reset line.  By specifying output-high here
+			 * we're relying on the fact that this pin has a default
+			 * pulldown at boot (which makes sure the controller was in
+			 * reset if it was powered) and then we set it high here
+			 * to take it out of reset.  Better would be if the touchscreen
+			 * driver could control this and we could remove
+			 * "output-high" here.
+			 */
+			output-high;
+		};
+	};
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "GO_KODAMA";
+};
+
+&i2c_tunnel {
+        google,remote-bus = <2>;
+};
-- 
2.31.0.291.g576ba9dcdaf-goog