[PATCH v2] ext4: fix check to prevent false positive report of incorrect used inodes

[Zhang Yi <yi.zhang@huawei.com>]

Commit <50122847007> ("ext4: fix check to prevent initializing reserved
inodes") check the block group zero and prevent initializing reserved
inodes. But in some special cases, the reserved inode may not all belong
to the group zero, it may exist into the second group if we format
filesystem below.

  mkfs.ext4 -b 4096 -g 8192 -N 1024 -I 4096 /dev/sda

So, it will end up triggering a false positive report of a corrupted
file system. This patch fix it by avoid check reserved inodes if no free
inode blocks will be zeroed.

Fixes: 50122847007 ("ext4: fix check to prevent initializing reserved inodes")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
---
Changes since v1:
 - Splict check of used_blks and used_inos to make code more
   comprehensible as Jan suggested.

 fs/ext4/ialloc.c | 48 ++++++++++++++++++++++++++++++++----------------
 1 file changed, 32 insertions(+), 16 deletions(-)

diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c
index 633ae7becd61..5f0c7fe32672 100644
--- a/fs/ext4/ialloc.c
+++ b/fs/ext4/ialloc.c
@@ -1513,6 +1513,7 @@ int ext4_init_inode_table(struct super_block *sb, ext4_group_t group,
 	handle_t *handle;
 	ext4_fsblk_t blk;
 	int num, ret = 0, used_blks = 0;
+	unsigned long used_inos = 0;
 
 	/* This should not happen, but just to be sure check this */
 	if (sb_rdonly(sb)) {
@@ -1543,22 +1544,37 @@ int ext4_init_inode_table(struct super_block *sb, ext4_group_t group,
 	 * used inodes so we need to skip blocks with used inodes in
 	 * inode table.
 	 */
-	if (!(gdp->bg_flags & cpu_to_le16(EXT4_BG_INODE_UNINIT)))
-		used_blks = DIV_ROUND_UP((EXT4_INODES_PER_GROUP(sb) -
-			    ext4_itable_unused_count(sb, gdp)),
-			    sbi->s_inodes_per_block);
-
-	if ((used_blks < 0) || (used_blks > sbi->s_itb_per_group) ||
-	    ((group == 0) && ((EXT4_INODES_PER_GROUP(sb) -
-			       ext4_itable_unused_count(sb, gdp)) <
-			      EXT4_FIRST_INO(sb)))) {
-		ext4_error(sb, "Something is wrong with group %u: "
-			   "used itable blocks: %d; "
-			   "itable unused count: %u",
-			   group, used_blks,
-			   ext4_itable_unused_count(sb, gdp));
-		ret = 1;
-		goto err_out;
+	if (!(gdp->bg_flags & cpu_to_le16(EXT4_BG_INODE_UNINIT))) {
+		used_inos = EXT4_INODES_PER_GROUP(sb) -
+			    ext4_itable_unused_count(sb, gdp);
+		used_blks = DIV_ROUND_UP(used_inos, sbi->s_inodes_per_block);
+
+		/* Bogus inode unused count? */
+		if (used_blks < 0 || used_blks > sbi->s_itb_per_group) {
+			ext4_error(sb, "Something is wrong with group %u: "
+				   "used itable blocks: %d; "
+				   "itable unused count: %u",
+				   group, used_blks,
+				   ext4_itable_unused_count(sb, gdp));
+			ret = 1;
+			goto err_out;
+		}
+
+		used_inos += group * EXT4_INODES_PER_GROUP(sb);
+		/*
+		 * Are there some uninitialized inodes in the inode table
+		 * before the first normal inode?
+		 */
+		if ((used_blks != sbi->s_itb_per_group) &&
+		     (used_inos < EXT4_FIRST_INO(sb))) {
+			ext4_error(sb, "Something is wrong with group %u: "
+				   "itable unused count: %u; "
+				   "itables initialized count: %ld",
+				   group, ext4_itable_unused_count(sb, gdp),
+				   used_inos);
+			ret = 1;
+			goto err_out;
+		}
 	}
 
 	blk = ext4_inode_table(sb, gdp) + used_blks;
-- 
2.25.4